[media] media: adv7180: add power pin control
authorSteve Longerbeam <slongerbeam@gmail.com>
Wed, 20 Jul 2016 00:03:32 +0000 (21:03 -0300)
committerMauro Carvalho Chehab <mchehab@s-opensource.com>
Wed, 24 Aug 2016 12:43:40 +0000 (09:43 -0300)
Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Documentation/devicetree/bindings/media/i2c/adv7180.txt
drivers/media/i2c/Kconfig
drivers/media/i2c/adv7180.c

index 0d501154dfb254487131cdd98529094b78bdf5dd..4da486f96ff69118be7b37c71c62912a8c016728 100644 (file)
@@ -15,6 +15,11 @@ Required Properties :
                "adi,adv7282"
                "adi,adv7282-m"
 
+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+  if any.
+
+
 Example:
 
        i2c0@1c22000 {
index c4df15a43d61bf83a10187d865ebe1b802323fc5..92cc5440133968f41b3ece6998b103c2c39e4850 100644 (file)
@@ -187,7 +187,7 @@ comment "Video decoders"
 
 config VIDEO_ADV7180
        tristate "Analog Devices ADV7180 decoder"
-       depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+       depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
        ---help---
          Support for the Analog Devices ADV7180 video decoder.
 
index cb83ebbe5131cc4e4937ee09ac5aa064deac569c..c367ad6f632799d2626fbd2fa88b103a0cf3ffcc 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
@@ -213,6 +214,7 @@ struct adv7180_state {
        struct media_pad        pad;
        struct mutex            mutex; /* mutual excl. when accessing chip */
        int                     irq;
+       struct gpio_desc        *pwdn_gpio;
        v4l2_std_id             curr_norm;
        bool                    powered;
        bool                    streaming;
@@ -463,6 +465,19 @@ static int adv7180_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
        return 0;
 }
 
+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+       if (!state->pwdn_gpio)
+               return;
+
+       if (on) {
+               gpiod_set_value_cansleep(state->pwdn_gpio, 0);
+               usleep_range(5000, 10000);
+       } else {
+               gpiod_set_value_cansleep(state->pwdn_gpio, 1);
+       }
+}
+
 static int adv7180_set_power(struct adv7180_state *state, bool on)
 {
        u8 val;
@@ -1210,6 +1225,8 @@ static int init_device(struct adv7180_state *state)
 
        mutex_lock(&state->mutex);
 
+       adv7180_set_power_pin(state, true);
+
        adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
        usleep_range(5000, 10000);
 
@@ -1279,6 +1296,14 @@ static int adv7180_probe(struct i2c_client *client,
        state->field = V4L2_FIELD_INTERLACED;
        state->chip_info = (struct adv7180_chip_info *)id->driver_data;
 
+       state->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+                                                  GPIOD_OUT_HIGH);
+       if (IS_ERR(state->pwdn_gpio)) {
+               ret = PTR_ERR(state->pwdn_gpio);
+               v4l_err(client, "request for power pin failed: %d\n", ret);
+               return ret;
+       }
+
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
                state->csi_client = i2c_new_dummy(client->adapter,
                                ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1370,6 +1395,8 @@ static int adv7180_remove(struct i2c_client *client)
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
                i2c_unregister_device(state->csi_client);
 
+       adv7180_set_power_pin(state, false);
+
        mutex_destroy(&state->mutex);
 
        return 0;