ARM: OMAP3: Beagle: fix OPP customization and initcall ordering

After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+:
PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered
using an existing CPU device, not the omap_device for MPU-SS.

First, fix the board file to use get_cpu_device() as required by the
above commit, otherwise custom OPPs will be added to the wrong device.

Second, the board files OPP init is called from the its init_machine
method, and the generic CPU devices are not yet created when
init_machine is run.  Therefore OPP initialization will fail.  To fix,
use a device_initcall() for the board file's OPP customization, and
make the device_initcall board-specific by using a machine_is check.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431c745a0e4134c847f96f84b73912053bf7..d41ab98890ffcc45731c7625b3ad7f44d53bb855 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/opp.h>
+#include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
 {
        int r = 0;
 
-       /* Initialize the omap3 opp table */
-       if (omap3_opp_init()) {
+       if (!machine_is_omap3_beagle())
+               return 0;
+
+       /* Initialize the omap3 opp table if not already created. */
+       r = omap3_opp_init();
+       if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
                pr_err("%s: opp default init failed\n", __func__);
-               return;
+               return r;
        }
 
        /* Custom OPP enabled for all xM versions */
        if (cpu_is_omap3630()) {
                struct device *mpu_dev, *iva_dev;
 
-               mpu_dev = omap_device_get_by_hwmod_name("mpu");
+               mpu_dev = get_cpu_device(0);
                iva_dev = omap_device_get_by_hwmod_name("iva");
 
                if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
                        pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
                                __func__, mpu_dev, iva_dev);
-                       return;
+                       return -ENODEV;
                }
                /* Enable MPU 1GHz and lower opps */
                r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +489,9 @@ static void __init beagle_opp_init(void)
                        opp_disable(iva_dev, 660000000);
                }
        }
-       return;
+       return 0;
 }
+device_initcall(beagle_opp_init);
 
 static void __init omap3_beagle_init(void)
 {
@@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void)
        /* Ensure SDRC pins are mux'd for self-refresh */
        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
        omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-       beagle_opp_init();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")