iio: accel: kxcjk-1013: optimize i2c transfers in trigger handler
authorAdriana Reus <adriana.reus@intel.com>
Thu, 24 Mar 2016 09:29:31 +0000 (11:29 +0200)
committerJonathan Cameron <jic23@kernel.org>
Sun, 3 Apr 2016 09:27:46 +0000 (10:27 +0100)
Some i2c busses (e.g.: Synopsys DesignWare I2C adapter) need to
enable/disable the bus at each i2c transfer and must wait for
the enable/disable to happen before sending the data.

When reading data in the trigger handler, the kxcjk-1013 accel driver
does one i2c transfer for each axis. This has an impact on the
frequency of the accelerometer at high sample rates due to additional
delays introduced by the i2c bus at each transfer.

Reading all axis values in one i2c transfer reduces the delays
introduced by the i2c bus. Uses i2c_smbus_read_i2c_block_data_or_emulated
that will fallback to reading each axis as a separate word in case i2c
block read is not supported.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
drivers/iio/accel/kxcjk-1013.c

index 3861fe99e8ead9ab530d2d2123cc6f12ecdc9045..488185684c406b440a83934129d8a29b86a13d25 100644 (file)
@@ -923,7 +923,7 @@ static const struct iio_event_spec kxcjk1013_event = {
                .realbits = 12,                                         \
                .storagebits = 16,                                      \
                .shift = 4,                                             \
-               .endianness = IIO_CPU,                                  \
+               .endianness = IIO_LE,                                   \
        },                                                              \
        .event_spec = &kxcjk1013_event,                         \
        .num_event_specs = 1                                            \
@@ -961,19 +961,16 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
        struct iio_poll_func *pf = p;
        struct iio_dev *indio_dev = pf->indio_dev;
        struct kxcjk1013_data *data = iio_priv(indio_dev);
-       int bit, ret, i = 0;
+       int ret;
 
        mutex_lock(&data->mutex);
-
-       for (bit = 0; bit < AXIS_MAX; bit++) {
-               ret = kxcjk1013_get_acc_reg(data, bit);
-               if (ret < 0) {
-                       mutex_unlock(&data->mutex);
-                       goto err;
-               }
-               data->buffer[i++] = ret;
-       }
+       ret = i2c_smbus_read_i2c_block_data_or_emulated(data->client,
+                                                       KXCJK1013_REG_XOUT_L,
+                                                       AXIS_MAX * 2,
+                                                       (u8 *)data->buffer);
        mutex_unlock(&data->mutex);
+       if (ret < 0)
+               goto err;
 
        iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
                                           data->timestamp);