ide-cd: remove handler wrappers
authorBorislav Petkov <petkovbb@googlemail.com>
Fri, 2 Jan 2009 15:12:55 +0000 (16:12 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 2 Jan 2009 15:12:55 +0000 (16:12 +0100)
Remove cdrom_do_newpc_cont and cdrom_start_rw_cont wrappers and pass
cdrom_transfer_packet_command to ide_execute_command directly.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: don't move cdrom_start_packet_command() around, remove newlines]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-cd.c

index 34981f578e26e9613904074604d9a4de4af16370..1a7410f882494907b3568d0263c917a0af73d2fa 100644 (file)
@@ -511,6 +511,9 @@ end_request:
        return 1;
 }
 
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
+static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
+
 /*
  * Set up the device registers for transferring a packet command on DEV,
  * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
@@ -519,8 +522,7 @@ end_request:
  * called when the interrupt from the drive arrives.  Otherwise, HANDLER
  * will be called immediately after the drive is prepared for the transfer.
  */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
-                                                 ide_handler_t *handler)
+static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
        struct request *rq = hwif->hwgroup->rq;
@@ -544,13 +546,14 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
                        drive->waiting_for_dma = 0;
 
                /* packet command */
-               ide_execute_command(drive, ATA_CMD_PACKET, handler,
+               ide_execute_command(drive, ATA_CMD_PACKET,
+                                   cdrom_transfer_packet_command,
                                    ATAPI_WAIT_PC, ide_cd_expiry);
                return ide_started;
        } else {
                ide_execute_pkt_cmd(drive);
 
-               return (*handler) (drive);
+               return cdrom_transfer_packet_command(drive);
        }
 }
 
@@ -561,11 +564,10 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
  * there's data ready.
  */
 #define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
-                                         struct request *rq,
-                                         ide_handler_t *handler)
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
+       struct request *rq = hwif->hwgroup->rq;
        int cmd_len;
        ide_startstop_t startstop;
 
@@ -592,7 +594,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
        }
 
        /* arm the interrupt handler */
-       ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
+       ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
 
        /* ATAPI commands get padded out to 12 bytes minimum */
        cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -680,8 +682,6 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
        return 1;
 }
 
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
 static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
                                                 struct request *rq)
 {
@@ -723,20 +723,6 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
        return ide_started;
 }
 
-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
-{
-       struct request *rq = drive->hwif->hwgroup->rq;
-
-       /* send the command to the drive and return */
-       return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
 /*
  * Fix up a possibly partially-processed request so that we can start it over
  * entirely, or even put it back on the request queue.
@@ -1126,13 +1112,6 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
        return ide_started;
 }
 
-static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
-{
-       struct request *rq = HWGROUP(drive)->rq;
-
-       return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
 static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 {
 
@@ -1177,16 +1156,12 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
                                        sector_t block)
 {
-       ide_handler_t *fn;
-
        ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
                      "rq->cmd_type: 0x%x, block: %llu\n",
                      __func__, rq->cmd[0], rq->cmd_type,
                      (unsigned long long)block);
 
        if (blk_fs_request(rq)) {
-               fn = cdrom_start_rw_cont;
-
                if (cdrom_start_rw(drive, rq) == ide_stopped)
                        return ide_stopped;
 
@@ -1194,8 +1169,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
                        return ide_stopped;
        } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
                   rq->cmd_type == REQ_TYPE_ATA_PC) {
-               fn = cdrom_do_newpc_cont;
-
                if (!rq->timeout)
                        rq->timeout = ATAPI_WAIT_PC;
 
@@ -1210,7 +1183,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
                return ide_stopped;
        }
 
-       return cdrom_start_packet_command(drive, fn);
+       return cdrom_start_packet_command(drive);
 }
 
 /*