--- /dev/null
+/*
+ comedi/drivers/pcmda12.c
+ Driver for Winsystems PC-104 based PCM-D/A-12 8-channel AO board.
+
+ COMEDI - Linux Control and Measurement Device Interface
+ Copyright (C) 2006 Calin A. Culianu <calin@ajvar.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+Driver: pcmda12
+Description: A driver for the Winsystems PCM-D/A-12
+Devices: [Winsystems] PCM-D/A-12 (pcmda12)
+Author: Calin Culianu <calin@ajvar.org>
+Updated: Fri, 13 Jan 2006 12:01:01 -0500
+Status: works
+
+A driver for the relatively straightforward-to-program PCM-D/A-12.
+This board doesn't support commands, and the only way to set its
+analog output range is to jumper the board. As such,
+comedi_data_write() ignores the range value specified.
+
+The board uses 16 consecutive I/O addresses starting at the I/O port
+base address. Each address corresponds to the LSB then MSB of a
+particular channel from 0-7.
+
+Note that the board is not ISA-PNP capable and thus
+needs the I/O port comedi_config parameter.
+
+Note that passing a nonzero value as the second config option will
+enable "simultaneous xfer" mode for this board, in which AO writes
+will not take effect until a subsequent read of any AO channel. This
+is so that one can speed up programming by preloading all AO registers
+with values before simultaneously setting them to take effect with one
+read command.
+
+Configuration Options:
+ [0] - I/O port base address
+ [1] - Do Simultaneous Xfer (see description)
+*/
+
+#include "../comedidev.h"
+
+#include <linux/pci.h> /* for PCI devices */
+
+#define MIN(a,b) ( ((a) < (b)) ? (a) : (b) )
+#define SDEV_NO ((int)(s - dev->subdevices))
+#define CHANS 8
+#define IOSIZE 16
+#define LSB(x) ((unsigned char)((x) & 0xff))
+#define MSB(x) ((unsigned char)((((unsigned short)(x))>>8) & 0xff))
+#define LSB_PORT(chan) (dev->iobase + (chan)*2)
+#define MSB_PORT(chan) (LSB_PORT(chan)+1)
+#define BITS 12
+
+/*
+ * Bords
+ */
+typedef struct pcmda12_board_struct {
+ const char *name;
+} pcmda12_board;
+
+/* note these have no effect and are merely here for reference..
+ these are configured by jumpering the board! */
+static const comedi_lrange pcmda12_ranges = {
+ 3,
+ {
+ UNI_RANGE(5), UNI_RANGE(10), BIP_RANGE(5)
+ }
+};
+
+static const pcmda12_board pcmda12_boards[] = {
+ {
+ name: "pcmda12",
+ },
+};
+
+/*
+ * Useful for shorthand access to the particular board structure
+ */
+#define thisboard ((const pcmda12_board *)dev->board_ptr)
+
+typedef struct {
+ lsampl_t ao_readback[CHANS];
+ int simultaneous_xfer_mode;
+} pcmda12_private;
+
+#define devpriv ((pcmda12_private *)(dev->private))
+
+/*
+ * The comedi_driver structure tells the Comedi core module
+ * which functions to call to configure/deconfigure (attach/detach)
+ * the board, and also about the kernel module that contains
+ * the device code.
+ */
+static int pcmda12_attach(comedi_device * dev, comedi_devconfig * it);
+static int pcmda12_detach(comedi_device * dev);
+
+static void zero_chans(comedi_device * dev);
+
+static comedi_driver driver = {
+ driver_name:"pcmda12",
+ module:THIS_MODULE,
+ attach:pcmda12_attach,
+ detach:pcmda12_detach,
+/* It is not necessary to implement the following members if you are
+ * writing a driver for a ISA PnP or PCI card */
+ /* Most drivers will support multiple types of boards by
+ * having an array of board structures. These were defined
+ * in pcmda12_boards[] above. Note that the element 'name'
+ * was first in the structure -- Comedi uses this fact to
+ * extract the name of the board without knowing any details
+ * about the structure except for its length.
+ * When a device is attached (by comedi_config), the name
+ * of the device is given to Comedi, and Comedi tries to
+ * match it by going through the list of board names. If
+ * there is a match, the address of the pointer is put
+ * into dev->board_ptr and driver->attach() is called.
+ *
+ * Note that these are not necessary if you can determine
+ * the type of board in software. ISA PnP, PCI, and PCMCIA
+ * devices are such boards.
+ */
+ board_name:&pcmda12_boards[0].name,
+ offset:sizeof(pcmda12_board),
+ num_names:sizeof(pcmda12_boards) / sizeof(pcmda12_board),
+};
+
+static int ao_winsn(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data);
+static int ao_rinsn(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data);
+
+/*
+ * Attach is called by the Comedi core to configure the driver
+ * for a particular board. If you specified a board_name array
+ * in the driver structure, dev->board_ptr contains that
+ * address.
+ */
+static int pcmda12_attach(comedi_device * dev, comedi_devconfig * it)
+{
+ comedi_subdevice *s;
+ unsigned long iobase;
+
+ iobase = it->options[0];
+ printk("comedi%d: %s: io: %lx %s ", dev->minor, driver.driver_name,
+ iobase, it->options[1] ? "simultaneous xfer mode enabled" : "");
+
+ if (!request_region(iobase, IOSIZE, driver.driver_name)) {
+ printk("I/O port conflict\n");
+ return -EIO;
+ }
+ dev->iobase = iobase;
+
+/*
+ * Initialize dev->board_name. Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
+ */
+ dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area. alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+ if (alloc_private(dev, sizeof(pcmda12_private)) < 0) {
+ printk("cannot allocate private data structure\n");
+ return -ENOMEM;
+ }
+
+ devpriv->simultaneous_xfer_mode = it->options[1];
+
+ /*
+ * Allocate the subdevice structures. alloc_subdevice() is a
+ * convenient macro defined in comedidev.h.
+ *
+ * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
+ * 96-channel version of the board.
+ */
+ if (alloc_subdevices(dev, 1) < 0) {
+ printk("cannot allocate subdevice data structures\n");
+ return -ENOMEM;
+ }
+
+ s = dev->subdevices;
+ s->private = NULL;
+ s->maxdata = (0x1 << BITS) - 1;
+ s->range_table = &pcmda12_ranges;
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = CHANS;
+ s->insn_write = &ao_winsn;
+ s->insn_read = &ao_rinsn;
+
+ zero_chans(dev); /* clear out all the registers, basically */
+
+ printk("attached\n");
+
+ return 1;
+}
+
+/*
+ * _detach is called to deconfigure a device. It should deallocate
+ * resources.
+ * This function is also called when _attach() fails, so it should be
+ * careful not to release resources that were not necessarily
+ * allocated by _attach(). dev->private and dev->subdevices are
+ * deallocated automatically by the core.
+ */
+static int pcmda12_detach(comedi_device * dev)
+{
+ printk("comedi%d: %s: remove\n", dev->minor, driver.driver_name);
+ if (dev->iobase)
+ release_region(dev->iobase, IOSIZE);
+ return 0;
+}
+
+static void zero_chans(comedi_device * dev)
+{ /* sets up an
+ ASIC chip to defaults */
+ int i;
+ for (i = 0; i < CHANS; ++i) {
+/* /\* do this as one instruction?? *\/ */
+/* outw(0, LSB_PORT(chan)); */
+ outb(0, LSB_PORT(i));
+ outb(0, MSB_PORT(i));
+ }
+ inb(LSB_PORT(0)); /* update chans. */
+}
+
+static int ao_winsn(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int i;
+ int chan = CR_CHAN(insn->chanspec);
+
+ /* Writing a list of values to an AO channel is probably not
+ * very useful, but that's how the interface is defined. */
+ for (i = 0; i < insn->n; ++i) {
+
+/* /\* do this as one instruction?? *\/ */
+/* outw(data[i], LSB_PORT(chan)); */
+
+ /* Need to do this as two instructions due to 8-bit bus?? */
+ /* first, load the low byte */
+ outb(LSB(data[i]), LSB_PORT(chan));
+ /* next, write the high byte */
+ outb(MSB(data[i]), MSB_PORT(chan));
+
+ /* save shadow register */
+ devpriv->ao_readback[chan] = data[i];
+
+ if (!devpriv->simultaneous_xfer_mode)
+ inb(LSB_PORT(chan));
+ }
+
+ /* return the number of samples written */
+ return i;
+}
+
+/* AO subdevices should have a read insn as well as a write insn.
+
+ Usually this means copying a value stored in devpriv->ao_readback.
+ However, since this driver supports simultaneous xfer then sometimes
+ this function actually accomplishes work.
+
+ Simultaneaous xfer mode is accomplished by loading ALL the values
+ you want for AO in all the channels, then READing off one of the AO
+ registers to initiate the instantaneous simultaneous update of all
+ DAC outputs, which makes all AO channels update simultaneously.
+ This is useful for some control applications, I would imagine.
+*/
+static int ao_rinsn(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int i;
+ int chan = CR_CHAN(insn->chanspec);
+
+ for (i = 0; i < insn->n; i++) {
+ if (devpriv->simultaneous_xfer_mode)
+ inb(LSB_PORT(chan));
+ /* read back shadow register */
+ data[i] = devpriv->ao_readback[chan];
+ }
+
+ return i;
+}
+
+/*
+ * A convenient macro that defines init_module() and cleanup_module(),
+ * as necessary.
+ */
+COMEDI_INITCLEANUP(driver);
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff