brcmfmac: replace WL_INFO() macro
authorArend van Spriel <arend@broadcom.com>
Wed, 5 Dec 2012 14:26:01 +0000 (15:26 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 10 Dec 2012 20:47:27 +0000 (15:47 -0500)
Get rid of WL_INFO() in favor of brcmf_dbg(INFO,...).

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h

index 9840ffbf843c549d3373fcfccc2b2bdf38ba9b94..2013bf328cf34b7f0bfc36e1def08d82f9c1a243 100644 (file)
@@ -90,8 +90,8 @@
 static bool check_vif_up(struct brcmf_cfg80211_vif *vif)
 {
        if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) {
-               WL_INFO("device is not ready : status (%lu)\n",
-                       vif->sme_state);
+               brcmf_dbg(INFO, "device is not ready : status (%lu)\n",
+                         vif->sme_state);
                return false;
        }
        return true;
@@ -477,7 +477,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
 
        if (ap) {
                set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state);
-               WL_INFO("IF Type = AP\n");
+               brcmf_dbg(INFO, "IF Type = AP\n");
        } else {
                err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
                if (err) {
@@ -485,8 +485,8 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
                        err = -EAGAIN;
                        goto done;
                }
-               WL_INFO("IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
-                       "Adhoc" : "Infra");
+               brcmf_dbg(INFO, "IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
+                         "Adhoc" : "Infra");
        }
        ndev->ieee80211_ptr->iftype = type;
 
@@ -507,7 +507,7 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc)
                        brcmf_err("fail to set mpc\n");
                        return;
                }
-               WL_INFO("MPC : %d\n", mpc);
+               brcmf_dbg(INFO, "MPC : %d\n", mpc);
        }
 }
 
@@ -685,7 +685,7 @@ brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev,
                                       params, params_size);
        if (err) {
                if (err == -EBUSY)
-                       WL_INFO("system busy : escan canceled\n");
+                       brcmf_dbg(INFO, "system busy : escan canceled\n");
                else
                        brcmf_err("error (%d)\n", err);
        }
@@ -804,8 +804,8 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
                                             &sr->ssid_le, sizeof(sr->ssid_le));
                if (err) {
                        if (err == -EBUSY)
-                               WL_INFO("BUSY: scan for \"%s\" canceled\n",
-                                       sr->ssid_le.SSID);
+                               brcmf_dbg(INFO, "BUSY: scan for \"%s\" canceled\n",
+                                         sr->ssid_le.SSID);
                        else
                                brcmf_err("WLC_SCAN error (%d)\n", err);
 
@@ -966,7 +966,7 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
        WL_TRACE("Enter\n");
 
        if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
-               WL_INFO("Call WLC_DISASSOC to stop excess roaming\n ");
+               brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
                err = brcmf_fil_cmd_data_set(vif->ifp,
                                             BRCMF_C_DISASSOC, NULL, 0);
                if (err)
@@ -1425,7 +1425,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
        } else
                cfg->channel = 0;
 
-       WL_INFO("ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
+       brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
 
        err = brcmf_set_wpa_version(ndev, sme);
        if (err) {
@@ -1889,7 +1889,7 @@ static s32
 brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
                                    struct net_device *ndev, u8 key_idx)
 {
-       WL_INFO("Not supported\n");
+       brcmf_dbg(INFO, "Not supported\n");
 
        return -EOPNOTSUPP;
 }
@@ -1989,12 +1989,12 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
        cfg->pwr_save = enabled;
        if (!check_vif_up(ifp->vif)) {
 
-               WL_INFO("Device is not ready, storing the value in cfg_info struct\n");
+               brcmf_dbg(INFO, "Device is not ready, storing the value in cfg_info struct\n");
                goto done;
        }
 
        pm = enabled ? PM_FAST : PM_OFF;
-       WL_INFO("power save %s\n", (pm ? "enabled" : "disabled"));
+       brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled"));
 
        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
        if (err) {
@@ -4351,7 +4351,7 @@ brcmf_dongle_roam(struct net_device *ndev, u32 roamvar, u32 bcn_timeout)
         * Enable/Disable built-in roaming to allow supplicant
         * to take care of roaming
         */
-       WL_INFO("Internal Roaming = %s\n", roamvar ? "Off" : "On");
+       brcmf_dbg(INFO, "Internal Roaming = %s\n", roamvar ? "Off" : "On");
        err = brcmf_fil_iovar_int_set(ifp, "roam_off", roamvar);
        if (err) {
                brcmf_err("roam_off error (%d)\n", err);
@@ -4391,7 +4391,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
                                    scan_assoc_time);
        if (err) {
                if (err == -EOPNOTSUPP)
-                       WL_INFO("Scan assoc time is not supported\n");
+                       brcmf_dbg(INFO, "Scan assoc time is not supported\n");
                else
                        brcmf_err("Scan assoc time error (%d)\n", err);
                goto dongle_scantime_out;
@@ -4400,7 +4400,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
                                    scan_unassoc_time);
        if (err) {
                if (err == -EOPNOTSUPP)
-                       WL_INFO("Scan unassoc time is not supported\n");
+                       brcmf_dbg(INFO, "Scan unassoc time is not supported\n");
                else
                        brcmf_err("Scan unassoc time error (%d)\n", err);
                goto dongle_scantime_out;
@@ -4410,7 +4410,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
                                    scan_passive_time);
        if (err) {
                if (err == -EOPNOTSUPP)
-                       WL_INFO("Scan passive time is not supported\n");
+                       brcmf_dbg(INFO, "Scan passive time is not supported\n");
                else
                        brcmf_err("Scan passive time error (%d)\n", err);
                goto dongle_scantime_out;
@@ -4436,7 +4436,7 @@ static s32 wl_update_wiphybands(struct brcmf_cfg80211_info *cfg)
        }
 
        phy = ((char *)&phy_list)[0];
-       WL_INFO("%c phy\n", phy);
+       brcmf_dbg(INFO, "%c phy\n", phy);
        if (phy == 'n' || phy == 'a') {
                wiphy = cfg_to_wiphy(cfg);
                wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
@@ -4471,8 +4471,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
                                    power_mode);
        if (err)
                goto default_conf_out;
-       WL_INFO("power save set to %s\n",
-               (power_mode ? "enabled" : "disabled"));
+       brcmf_dbg(INFO, "power save set to %s\n",
+                 (power_mode ? "enabled" : "disabled"));
 
        err = brcmf_dongle_roam(ndev, (cfg->roam_on ? 0 : 1),
                                WL_BEACON_TIMEOUT);
index 7ca1f2e08f3c335264ea3773021b1640f6adc95d..2ae2a3db17da782b760c561608b738bd55cbcb06 100644 (file)
@@ -19,7 +19,6 @@
 
 #include "dhd_dbg.h"
 
-#define        WL_INFO(fmt, ...)       brcmf_dbg(INFO, fmt, ##__VA_ARGS__)
 #define        WL_TRACE(fmt, ...)      brcmf_dbg(TRACE, fmt, ##__VA_ARGS__)
 #define        WL_SCAN(fmt, ...)       brcmf_dbg(SCAN, fmt, ##__VA_ARGS__)
 #define        WL_CONN(fmt, ...)       brcmf_dbg(CONN, fmt, ##__VA_ARGS__)