* ide-tape.c: add 'drive' argument to idetape_update_buffers().
* Add generic ide_pc_intr() helper to ide-atapi.c and then
convert ide-{floppy,tape,scsi} device drivers to use it.
* ide-tape.c: remove no longer needed DBG_PC_INTR.
There should be no functional changes caused by this patch
(unless the debugging is explicitely compiled in).
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ide.h>
+#include <scsi/scsi.h>
+
+#ifdef DEBUG
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide: " fmt, ## args)
+#else
+#define debug_log(fmt, args...) do {} while (0)
+#endif
+
+/* TODO: unify the code thus making some arguments go away */
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
+{
+ ide_hwif_t *hwif = drive->hwif;
+ xfer_func_t *xferfunc;
+ unsigned int temp;
+ u16 bcount;
+ u8 stat, ireason, scsi = drive->scsi;
+
+ debug_log("Enter %s - interrupt handler\n", __func__);
+
+ if (pc->flags & PC_FLAG_TIMEDOUT) {
+ pc->callback(drive);
+ return ide_stopped;
+ }
+
+ /* Clear the interrupt */
+ stat = ide_read_status(drive);
+
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ if (hwif->dma_ops->dma_end(drive) ||
+ (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) {
+ if (drive->media == ide_floppy && !scsi)
+ printk(KERN_ERR "%s: DMA %s error\n",
+ drive->name, rq_data_dir(pc->rq)
+ ? "write" : "read");
+ pc->flags |= PC_FLAG_DMA_ERROR;
+ } else {
+ pc->xferred = pc->req_xfer;
+ if (update_buffers)
+ update_buffers(drive, pc);
+ }
+ debug_log("%s: DMA finished\n", drive->name);
+ }
+
+ /* No more interrupts */
+ if ((stat & DRQ_STAT) == 0) {
+ debug_log("Packet command completed, %d bytes transferred\n",
+ pc->xferred);
+
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
+
+ local_irq_enable_in_hardirq();
+
+ if (drive->media == ide_tape && !scsi &&
+ (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
+ stat &= ~ERR_STAT;
+ if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
+ /* Error detected */
+ debug_log("%s: I/O error\n", drive->name);
+
+ if (drive->media != ide_tape || scsi) {
+ pc->rq->errors++;
+ if (scsi)
+ goto cmd_finished;
+ }
+
+ if (pc->c[0] == REQUEST_SENSE) {
+ printk(KERN_ERR "%s: I/O error in request sense"
+ " command\n", drive->name);
+ return ide_do_reset(drive);
+ }
+
+ debug_log("[cmd %x]: check condition\n", pc->c[0]);
+
+ /* Retry operation */
+ retry_pc(drive);
+ /* queued, but not started */
+ return ide_stopped;
+ }
+cmd_finished:
+ pc->error = 0;
+ if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
+ (stat & SEEK_STAT) == 0) {
+ dsc_handle(drive);
+ return ide_stopped;
+ }
+ /* Command finished - Call the callback function */
+ pc->callback(drive);
+ return ide_stopped;
+ }
+
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
+ printk(KERN_ERR "%s: The device wants to issue more interrupts "
+ "in DMA mode\n", drive->name);
+ ide_dma_off(drive);
+ return ide_do_reset(drive);
+ }
+ /* Get the number of bytes to transfer on this interrupt. */
+ bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
+ hwif->INB(hwif->io_ports.lbam_addr);
+
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+
+ if (ireason & CD) {
+ printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
+ return ide_do_reset(drive);
+ }
+ if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
+ /* Hopefully, we will never get here */
+ printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
+ "to %s!\n", drive->name,
+ (ireason & IO) ? "Write" : "Read",
+ (ireason & IO) ? "Read" : "Write");
+ return ide_do_reset(drive);
+ }
+ if (!(pc->flags & PC_FLAG_WRITING)) {
+ /* Reading - Check that we have enough space */
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
+ printk(KERN_ERR "%s: The device wants to send "
+ "us more data than expected - "
+ "discarding data\n",
+ drive->name);
+ if (scsi)
+ temp = pc->buf_size - pc->xferred;
+ else
+ temp = 0;
+ if (temp) {
+ if (pc->sg)
+ io_buffers(drive, pc, temp, 0);
+ else
+ hwif->input_data(drive, NULL,
+ pc->cur_pos, temp);
+ printk(KERN_ERR "%s: transferred %d of "
+ "%d bytes\n",
+ drive->name,
+ temp, bcount);
+ }
+ pc->xferred += temp;
+ pc->cur_pos += temp;
+ ide_pad_transfer(drive, 0, bcount - temp);
+ ide_set_handler(drive, handler, timeout,
+ expiry);
+ return ide_started;
+ }
+ debug_log("The device wants to send us more data than "
+ "expected - allowing transfer\n");
+ }
+ xferfunc = hwif->input_data;
+ } else
+ xferfunc = hwif->output_data;
+
+ if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
+ (drive->media == ide_tape && !scsi && pc->bh) ||
+ (scsi && pc->sg))
+ io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING));
+ else
+ xferfunc(drive, NULL, pc->cur_pos, bcount);
+
+ /* Update the current position */
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;
+
+ debug_log("[cmd %x] transferred %d bytes on that intr.\n",
+ pc->c[0], bcount);
+
+ /* And set the interrupt handler again */
+ ide_set_handler(drive, handler, timeout, expiry);
+ return ide_started;
+}
+EXPORT_SYMBOL_GPL(ide_pc_intr);
static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
{
static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
- struct ide_atapi_pc *pc = floppy->pc;
- struct request *rq = pc->rq;
- xfer_func_t *xferfunc;
- unsigned int temp;
- int dma_error = 0;
- u16 bcount;
- u8 stat, ireason;
-
- debug_log("Enter %s - interrupt handler\n", __func__);
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- dma_error = hwif->dma_ops->dma_end(drive);
- if (dma_error) {
- printk(KERN_ERR "%s: DMA %s error\n", drive->name,
- rq_data_dir(rq) ? "write" : "read");
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idefloppy_update_buffers(drive, pc);
- }
- debug_log("%s: DMA finished\n", drive->name);
- }
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log("Packet command completed, %d bytes transferred\n",
- pc->xferred);
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-
- local_irq_enable_in_hardirq();
-
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log("%s: I/O error\n", drive->name);
- rq->errors++;
- if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- printk(KERN_ERR "%s: I/O error in request sense"
- " command\n", drive->name);
- return ide_do_reset(drive);
- }
-
- debug_log("[cmd %x]: check condition\n", pc->c[0]);
-
- /* Retry operation */
- idefloppy_retry_pc(drive);
- /* queued, but not started */
- return ide_stopped;
- }
- pc->error = 0;
- /* Command finished - Call the callback function */
- pc->callback(drive);
- return ide_stopped;
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "%s: The device wants to issue more interrupts "
- "in DMA mode\n", drive->name);
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
-
- /* Get the number of bytes to transfer */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- /* on this interrupt */
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
- "to %s!\n", drive->name,
- (ireason & IO) ? "Write" : "Read",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "%s: The device wants to send "
- "us more data than expected - "
- "discarding data\n",
- drive->name);
- ide_pad_transfer(drive, 0, bcount);
-
- ide_set_handler(drive,
- &idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD,
- NULL);
- return ide_started;
- }
- debug_log("The device wants to send us more data than "
- "expected - allowing transfer\n");
- }
- }
- if (pc->flags & PC_FLAG_WRITING)
- xferfunc = hwif->output_data;
- else
- xferfunc = hwif->input_data;
-
- if (pc->buf)
- xferfunc(drive, NULL, pc->cur_pos, bcount);
- else
- ide_floppy_io_buffers(drive, pc, bcount,
- !!(pc->flags & PC_FLAG_WRITING));
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- debug_log("[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
- return ide_started;
+ return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
+ IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
+ idefloppy_retry_pc, NULL, ide_floppy_io_buffers);
}
/*
DBG_PROCS = (1 << 3),
/* buffer alloc info (pc_stack & rq_stack) */
DBG_PCRQ_STACK = (1 << 4),
- /* IRQ handler (always log debug info if debugging is on) */
- DBG_PC_INTR = (1 << 5),
};
/* define to see debug info */
#if IDETAPE_DEBUG_LOG
#define debug_log(lvl, fmt, args...) \
{ \
- if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \
+ if (tape->debug_mask & lvl) \
printk(KERN_INFO "ide-tape: " fmt, ## args); \
}
#else
}
}
-static void idetape_update_buffers(struct ide_atapi_pc *pc)
+static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
pc->xferred = pc->req_xfer -
tape->blk_size *
get_unaligned_be32(&sense[3]);
- idetape_update_buffers(pc);
+ idetape_update_buffers(drive, pc);
}
/*
*/
static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
- xfer_func_t *xferfunc;
- unsigned int temp;
- u16 bcount;
- u8 stat, ireason;
-
- debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__);
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) {
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idetape_update_buffers(pc);
- }
- debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name);
- }
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log(DBG_PC_INTR, "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
-
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- local_irq_enable_in_hardirq();
-
- if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
- stat &= ~ERR_STAT;
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name);
-
- if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "%s: I/O error in request sense"
- " command\n", drive->name);
- return ide_do_reset(drive);
- }
- debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n",
- pc->c[0]);
-
- /* Retry operation */
- idetape_retry_pc(drive);
- return ide_stopped;
- }
- pc->error = 0;
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & SEEK_STAT) == 0) {
- ide_tape_handle_dsc(drive);
- return ide_stopped;
- }
- /* Command finished - Call the callback function */
- pc->callback(drive);
- return ide_stopped;
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "%s: The device wants to issue more interrupts "
- "in DMA mode\n", drive->name);
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
- /* Get the number of bytes to transfer on this interrupt. */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
-
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
- "to %s!\n", drive->name,
- (ireason & IO) ? "Write" : "Read",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "%s: The device wants to send "
- "us more data than expected - "
- "discarding data\n",
- drive->name);
- ide_pad_transfer(drive, 0, bcount);
- ide_set_handler(drive, &idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
- return ide_started;
- }
- debug_log(DBG_PC_INTR, "The device wants to send us more "
- "data than expected - allowing transfer\n");
- }
- xferfunc = hwif->input_data;
- } else {
- xferfunc = hwif->output_data;
- }
-
- if (pc->bh)
- ide_tape_io_buffers(drive, pc, bcount,
- !!(pc->flags & PC_FLAG_WRITING));
- else
- xferfunc(drive, NULL, pc->cur_pos, bcount);
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
- return ide_started;
+ return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
+ NULL, idetape_update_buffers, idetape_retry_pc,
+ ide_tape_handle_dsc, ide_tape_io_buffers);
}
/*
static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc = scsi->pc;
- struct request *rq = pc->rq;
- xfer_func_t *xferfunc;
- unsigned int temp;
- u16 bcount;
- u8 stat, ireason;
-
- debug_log("Enter %s - interrupt handler\n", __func__);
-
- if (pc->flags & PC_FLAG_TIMEDOUT) {
- pc->callback(drive);
- return ide_stopped;
- }
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- if (hwif->dma_ops->dma_end(drive))
- pc->flags |= PC_FLAG_DMA_ERROR;
- else
- pc->xferred = pc->req_xfer;
- debug_log("%s: DMA finished\n", drive->name);
- }
-
- if ((stat & DRQ_STAT) == 0) {
- /* No more interrupts */
- debug_log("Packet command completed, %d bytes transferred\n",
- pc->xferred);
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- local_irq_enable_in_hardirq();
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log("%s: I/O error\n", drive->name);
-
- rq->errors++;
- }
- pc->callback(drive);
- return ide_stopped;
- }
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "%s: The device wants to issue more interrupts "
- "in DMA mode\n", drive->name);
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
- return ide_do_reset (drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
- "to %s!\n", drive->name,
- (ireason & IO) ? "Write" : "Read",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "%s: The device wants to send "
- "us more data than expected - "
- "discarding data\n",
- drive->name);
- temp = pc->buf_size - pc->xferred;
- if (temp) {
- if (pc->sg)
- ide_scsi_io_buffers(drive, pc,
- temp, 0);
- else
- hwif->input_data(drive, NULL,
- pc->cur_pos, temp);
- printk(KERN_ERR "%s: transferred %d of "
- "%d bytes\n",
- drive->name,
- temp, bcount);
- }
- pc->xferred += temp;
- pc->cur_pos += temp;
- ide_pad_transfer(drive, 0, bcount - temp);
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
- }
- debug_log("The device wants to send us more data than "
- "expected - allowing transfer\n");
- }
- xferfunc = hwif->input_data;
- } else
- xferfunc = hwif->output_data;
-
- if (pc->sg)
- ide_scsi_io_buffers(drive, pc, bcount,
- !!(pc->flags & PC_FLAG_WRITING));
- else
- xferfunc(drive, NULL, pc->cur_pos, bcount);
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- debug_log("[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
+ return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc),
+ idescsi_expiry, NULL, NULL, NULL,
+ ide_scsi_io_buffers);
}
static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
+ int));
ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
ide_handler_t *, unsigned int, ide_expiry_t *);
ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff