udev = to_usb_device(dev);
- /* FIXME: resume a suspended device */
- if (udev->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
-
/* TODO: Add real matching code */
+ /* The device should always appear to be in use
+ * unless the driver suports autosuspend.
+ */
+ udev->pm_usage_cnt = !(udriver->supports_autosuspend);
+
error = udriver->probe(udev);
return error;
}
{
struct usb_driver *driver = to_usb_driver(dev->driver);
struct usb_interface *intf;
+ struct usb_device *udev;
const struct usb_device_id *id;
int error = -ENODEV;
return error;
intf = to_usb_interface(dev);
-
- /* FIXME we'd much prefer to just resume it ... */
- if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
+ udev = interface_to_usbdev(intf);
id = usb_match_id(intf, driver->id_table);
if (!id)
if (id) {
dev_dbg(dev, "%s - got id\n", __FUNCTION__);
+ error = usb_autoresume_device(udev, 1);
+ if (error)
+ return error;
+
/* Interface "power state" doesn't correspond to any hardware
* state whatsoever. We use it to record when it's bound to
* a driver that may start I/0: it's not frozen/quiesced.
*/
mark_active(intf);
intf->condition = USB_INTERFACE_BINDING;
+
+ /* The interface should always appear to be in use
+ * unless the driver suports autosuspend.
+ */
+ intf->pm_usage_cnt = !(driver->supports_autosuspend);
+
error = driver->probe(intf, id);
if (error) {
mark_quiesced(intf);
+ intf->needs_remote_wakeup = 0;
intf->condition = USB_INTERFACE_UNBOUND;
} else
intf->condition = USB_INTERFACE_BOUND;
+
+ usb_autosuspend_device(udev, 1);
}
return error;
{
struct usb_driver *driver = to_usb_driver(dev->driver);
struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_device *udev;
+ int error;
intf->condition = USB_INTERFACE_UNBINDING;
+ /* Autoresume for set_interface call below */
+ udev = interface_to_usbdev(intf);
+ error = usb_autoresume_device(udev, 1);
+
/* release all urbs for this interface */
usb_disable_interface(interface_to_usbdev(intf), intf);
intf->altsetting[0].desc.bInterfaceNumber,
0);
usb_set_intfdata(intf, NULL);
+
intf->condition = USB_INTERFACE_UNBOUND;
mark_quiesced(intf);
+ intf->needs_remote_wakeup = 0;
+
+ if (!error)
+ usb_autosuspend_device(udev, 1);
return 0;
}
struct usb_interface *iface, void* priv)
{
struct device *dev = &iface->dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
if (dev->driver)
return -EBUSY;
dev->driver = &driver->drvwrap.driver;
usb_set_intfdata(iface, priv);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
iface->condition = USB_INTERFACE_BOUND;
mark_active(iface);
+ iface->pm_usage_cnt = !(driver->supports_autosuspend);
+ mutex_unlock(&udev->pm_mutex);
/* if interface was already added, bind now; else let
* the future device_add() bind it, bypassing probe()
struct usb_interface *iface)
{
struct device *dev = &iface->dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
/* this should never happen, don't release something that's not ours */
if (!dev->driver || dev->driver != &driver->drvwrap.driver)
dev->driver = NULL;
usb_set_intfdata(iface, NULL);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
iface->condition = USB_INTERFACE_UNBOUND;
mark_quiesced(iface);
+ iface->needs_remote_wakeup = 0;
+ mutex_unlock(&udev->pm_mutex);
}
EXPORT_SYMBOL(usb_driver_release_interface);
#ifdef CONFIG_PM
-/* Caller has locked udev */
+/* Caller has locked udev->pm_mutex */
static int suspend_device(struct usb_device *udev, pm_message_t msg)
{
struct usb_device_driver *udriver;
/* For devices that don't have a driver, we do a standard suspend. */
if (udev->dev.driver == NULL) {
+ udev->do_remote_wakeup = 0;
status = usb_port_suspend(udev);
goto done;
}
status = udriver->suspend(udev, msg);
done:
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
udev->dev.power.power_state.event = msg.event;
return status;
}
-/* Caller has locked udev */
+/* Caller has locked udev->pm_mutex */
static int resume_device(struct usb_device *udev)
{
struct usb_device_driver *udriver;
status = udriver->resume(udev);
done:
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
udev->dev.power.power_state.event = PM_EVENT_ON;
return status;
}
-/* Caller has locked intf's usb_device */
+/* Caller has locked intf's usb_device's pm_mutex */
static int suspend_interface(struct usb_interface *intf, pm_message_t msg)
{
struct usb_driver *driver;
!is_active(intf))
goto done;
- if (intf->dev.driver == NULL) /* This can't happen */
+ if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */
goto done;
driver = to_usb_driver(intf->dev.driver);
if (driver->suspend && driver->resume) {
status = driver->suspend(intf, msg);
- if (status)
+ if (status == 0)
+ mark_quiesced(intf);
+ else if (!interface_to_usbdev(intf)->auto_pm)
dev_err(&intf->dev, "%s error %d\n",
"suspend", status);
- else
- mark_quiesced(intf);
} else {
// FIXME else if there's no suspend method, disconnect...
+ // Not possible if auto_pm is set...
dev_warn(&intf->dev, "no suspend for driver %s?\n",
driver->name);
mark_quiesced(intf);
}
done:
+ // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
intf->dev.power.power_state.event = msg.event;
return status;
}
-/* Caller has locked intf's usb_device */
+/* Caller has locked intf's usb_device's pm_mutex */
static int resume_interface(struct usb_interface *intf)
{
struct usb_driver *driver;
is_active(intf))
goto done;
+ /* Don't let autoresume interfere with unbinding */
+ if (intf->condition == USB_INTERFACE_UNBINDING)
+ goto done;
+
/* Can't resume it if it doesn't have a driver. */
- if (intf->dev.driver == NULL) {
+ if (intf->condition == USB_INTERFACE_UNBOUND) {
status = -ENOTCONN;
goto done;
}
}
done:
+ // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
intf->dev.power.power_state.event = PM_EVENT_ON;
return status;
}
-/* Caller has locked udev */
+/**
+ * usb_suspend_both - suspend a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for suspending USB devices. It calls the
+ * suspend methods for all the interface drivers in @udev and then calls
+ * the suspend method for @udev itself. If an error occurs at any stage,
+ * all the interfaces which were suspended are resumed so that they remain
+ * in the same state as the device.
+ *
+ * If an autosuspend is in progress (@udev->auto_pm is set), the routine
+ * checks first to make sure that neither the device itself or any of its
+ * active interfaces is in use (pm_usage_cnt is greater than 0). If they
+ * are, the autosuspend fails.
+ *
+ * If the suspend succeeds, the routine recursively queues an autosuspend
+ * request for @udev's parent device, thereby propagating the change up
+ * the device tree. If all of the parent's children are now suspended,
+ * the parent will autosuspend in turn.
+ *
+ * The suspend method calls are subject to mutual exclusion under control
+ * of @udev's pm_mutex. Many of these calls are also under the protection
+ * of @udev's device lock (including all requests originating outside the
+ * USB subsystem), but autosuspend requests generated by a child device or
+ * interface driver may not be. Usbcore will insure that the method calls
+ * do not arrive during bind, unbind, or reset operations. However, drivers
+ * must be prepared to handle suspend calls arriving at unpredictable times.
+ * The only way to block such calls is to do an autoresume (preventing
+ * autosuspends) while holding @udev's device lock (preventing outside
+ * suspends).
+ *
+ * The caller must hold @udev->pm_mutex.
+ *
+ * This routine can run only in process context.
+ */
int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
int i = 0;
struct usb_interface *intf;
+ struct usb_device *parent = udev->parent;
+
+ cancel_delayed_work(&udev->autosuspend);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
+ if (udev->state == USB_STATE_SUSPENDED)
+ return 0;
+ udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+
+ /* For autosuspend, fail fast if anything is in use.
+ * Also fail if any interfaces require remote wakeup but it
+ * isn't available. */
+ if (udev->auto_pm) {
+ if (udev->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (udev->actconfig) {
+ for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ if (!is_active(intf))
+ continue;
+ if (intf->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (intf->needs_remote_wakeup &&
+ !udev->do_remote_wakeup) {
+ dev_dbg(&udev->dev,
+ "remote wakeup needed for autosuspend\n");
+ return -EOPNOTSUPP;
+ }
+ }
+ i = 0;
+ }
+ }
+
+ /* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
intf = udev->actconfig->interface[i];
resume_interface(intf);
}
- }
+
+ /* If the suspend succeeded, propagate it up the tree */
+ } else if (parent)
+ usb_autosuspend_device(parent, 0);
+
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
}
-/* Caller has locked udev */
+/**
+ * usb_resume_both - resume a USB device and its interfaces
+ * @udev: the usb_device to resume
+ *
+ * This is the central routine for resuming USB devices. It calls the
+ * the resume method for @udev and then calls the resume methods for all
+ * the interface drivers in @udev.
+ *
+ * Before starting the resume, the routine calls itself recursively for
+ * the parent device of @udev, thereby propagating the change up the device
+ * tree and assuring that @udev will be able to resume. If the parent is
+ * unable to resume successfully, the routine fails.
+ *
+ * The resume method calls are subject to mutual exclusion under control
+ * of @udev's pm_mutex. Many of these calls are also under the protection
+ * of @udev's device lock (including all requests originating outside the
+ * USB subsystem), but autoresume requests generated by a child device or
+ * interface driver may not be. Usbcore will insure that the method calls
+ * do not arrive during bind, unbind, or reset operations. However, drivers
+ * must be prepared to handle resume calls arriving at unpredictable times.
+ * The only way to block such calls is to do an autoresume (preventing
+ * other autoresumes) while holding @udev's device lock (preventing outside
+ * resumes).
+ *
+ * The caller must hold @udev->pm_mutex.
+ *
+ * This routine can run only in process context.
+ */
int usb_resume_both(struct usb_device *udev)
{
- int status;
+ int status = 0;
int i;
struct usb_interface *intf;
+ struct usb_device *parent = udev->parent;
+
+ cancel_delayed_work(&udev->autosuspend);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
- /* Can't resume if the parent is suspended */
- if (udev->parent && udev->parent->state == USB_STATE_SUSPENDED) {
- dev_warn(&udev->dev, "can't resume; parent is suspended\n");
- return -EHOSTUNREACH;
+ /* Propagate the resume up the tree, if necessary */
+ if (udev->state == USB_STATE_SUSPENDED) {
+ if (parent) {
+ mutex_lock_nested(&parent->pm_mutex, parent->level);
+ parent->auto_pm = 1;
+ status = usb_resume_both(parent);
+ } else {
+
+ /* We can't progagate beyond the USB subsystem,
+ * so if a root hub's controller is suspended
+ * then we're stuck. */
+ if (udev->dev.parent->power.power_state.event !=
+ PM_EVENT_ON)
+ status = -EHOSTUNREACH;
+ }
+ if (status == 0 && udev->state == USB_STATE_SUSPENDED)
+ status = resume_device(udev);
+ if (parent)
+ mutex_unlock(&parent->pm_mutex);
}
- status = resume_device(udev);
+ /* Now the parent won't suspend until we are finished */
+
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
resume_interface(intf);
}
}
+
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ return status;
+}
+
+#ifdef CONFIG_USB_SUSPEND
+
+/**
+ * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
+ * @udev - the usb_device to autosuspend
+ * @dec_usage_cnt - flag to decrement @udev's PM-usage counter
+ *
+ * This routine should be called when a core subsystem is finished using
+ * @udev and wants to allow it to autosuspend. Examples would be when
+ * @udev's device file in usbfs is closed or after a configuration change.
+ *
+ * @dec_usage_cnt should be 1 if the subsystem previously incremented
+ * @udev's usage counter (such as by passing 1 to usb_autoresume_device);
+ * otherwise it should be 0.
+ *
+ * If the usage counter for @udev or any of its active interfaces is greater
+ * than 0, the autosuspend request will not be queued. (If an interface
+ * driver does not support autosuspend then its usage counter is permanently
+ * positive.) Likewise, if an interface driver requires remote-wakeup
+ * capability during autosuspend but remote wakeup is disabled, the
+ * autosuspend will fail.
+ *
+ * Often the caller will hold @udev's device lock, but this is not
+ * necessary.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
+{
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->pm_usage_cnt -= dec_usage_cnt;
+ if (udev->pm_usage_cnt <= 0)
+ schedule_delayed_work(&udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&udev->dev, "%s: cnt %d\n",
+ // __FUNCTION__, udev->pm_usage_cnt);
+}
+
+/**
+ * usb_autoresume_device - immediately autoresume a USB device and its interfaces
+ * @udev - the usb_device to autoresume
+ * @inc_usage_cnt - flag to increment @udev's PM-usage counter
+ *
+ * This routine should be called when a core subsystem wants to use @udev
+ * and needs to guarantee that it is not suspended. In addition, the
+ * caller can prevent @udev from being autosuspended subsequently. (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * Examples would be when @udev's device file in usbfs is opened (autosuspend
+ * should be prevented until the file is closed) or when a remote-wakeup
+ * request is received (later autosuspends should not be prevented).
+ *
+ * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent
+ * autosuspends. This prevention will persist until the usage counter is
+ * decremented again (such as by passing 1 to usb_autosuspend_device).
+ * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged.
+ * Regardless, if the autoresume fails then the usage counter is not
+ * incremented.
+ *
+ * Often the caller will hold @udev's device lock, but this is not
+ * necessary (and attempting it might cause deadlock).
+ *
+ * This routine can run only in process context.
+ */
+int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
+{
+ int status;
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->pm_usage_cnt += inc_usage_cnt;
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ udev->pm_usage_cnt -= inc_usage_cnt;
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, udev->pm_usage_cnt);
+ return status;
+}
+
+/**
+ * usb_autopm_put_interface - decrement a USB interface's PM-usage counter
+ * @intf - the usb_interface whose counter should be decremented
+ *
+ * This routine should be called by an interface driver when it is
+ * finished using @intf and wants to allow it to autosuspend. A typical
+ * example would be a character-device driver when its device file is
+ * closed.
+ *
+ * The routine decrements @intf's usage counter. When the counter reaches
+ * 0, a delayed autosuspend request for @intf's device is queued. When
+ * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all
+ * the other usage counters for the sibling interfaces and @intf's
+ * usb_device, the device and all its interfaces will be autosuspended.
+ *
+ * Note that @intf->pm_usage_cnt is owned by the interface driver. The
+ * core will not change its value other than the increment and decrement
+ * in usb_autopm_get_interface and usb_autopm_put_interface. The driver
+ * may use this simple counter-oriented discipline or may set the value
+ * any way it likes.
+ *
+ * If the driver has set @intf->needs_remote_wakeup then autosuspend will
+ * take place only if the device's remote-wakeup facility is enabled.
+ *
+ * Suspend method calls queued by this routine can arrive at any time
+ * while @intf is resumed and its usage counter is equal to 0. They are
+ * not protected by the usb_device's lock but only by its pm_mutex.
+ * Drivers must provide their own synchronization.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autopm_put_interface(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ if (intf->condition != USB_INTERFACE_UNBOUND) {
+ if (--intf->pm_usage_cnt <= 0)
+ schedule_delayed_work(&udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ }
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&intf->dev, "%s: cnt %d\n",
+ // __FUNCTION__, intf->pm_usage_cnt);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
+
+/**
+ * usb_autopm_get_interface - increment a USB interface's PM-usage counter
+ * @intf - the usb_interface whose counter should be incremented
+ *
+ * This routine should be called by an interface driver when it wants to
+ * use @intf and needs to guarantee that it is not suspended. In addition,
+ * the routine prevents @intf from being autosuspended subsequently. (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * This prevention will persist until usb_autopm_put_interface() is called
+ * or @intf is unbound. A typical example would be a character-device
+ * driver when its device file is opened.
+ *
+ * The routine increments @intf's usage counter. So long as the counter
+ * is greater than 0, autosuspend will not be allowed for @intf or its
+ * usb_device. When the driver is finished using @intf it should call
+ * usb_autopm_put_interface() to decrement the usage counter and queue
+ * a delayed autosuspend request (if the counter is <= 0).
+ *
+ * Note that @intf->pm_usage_cnt is owned by the interface driver. The
+ * core will not change its value other than the increment and decrement
+ * in usb_autopm_get_interface and usb_autopm_put_interface. The driver
+ * may use this simple counter-oriented discipline or may set the value
+ * any way it likes.
+ *
+ * Resume method calls generated by this routine can arrive at any time
+ * while @intf is suspended. They are not protected by the usb_device's
+ * lock but only by its pm_mutex. Drivers must provide their own
+ * synchronization.
+ *
+ * This routine can run only in process context.
+ */
+int usb_autopm_get_interface(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int status;
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ if (intf->condition == USB_INTERFACE_UNBOUND)
+ status = -ENODEV;
+ else {
+ ++intf->pm_usage_cnt;
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ --intf->pm_usage_cnt;
+ }
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, intf->pm_usage_cnt);
return status;
}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
+
+#endif /* CONFIG_USB_SUSPEND */
static int usb_suspend(struct device *dev, pm_message_t message)
{
int status;
- if (is_usb_device(dev))
- status = usb_suspend_both(to_usb_device(dev), message);
- else
+ if (is_usb_device(dev)) {
+ struct usb_device *udev = to_usb_device(dev);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->auto_pm = 0;
+ status = usb_suspend_both(udev, message);
+ mutex_unlock(&udev->pm_mutex);
+ } else
status = 0;
return status;
}
int status;
if (is_usb_device(dev)) {
- status = usb_resume_both(to_usb_device(dev));
+ struct usb_device *udev = to_usb_device(dev);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->auto_pm = 0;
+ status = usb_resume_both(udev);
+ mutex_unlock(&udev->pm_mutex);
/* Rebind drivers that had no suspend method? */
} else
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
- udev->state = new_state;
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
- if (new_state == USB_STATE_CONFIGURED)
+ if (udev->state == USB_STATE_SUSPENDED
+ || new_state == USB_STATE_SUSPENDED)
+ ; /* No change to wakeup settings */
+ else if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
- else if (new_state != USB_STATE_SUSPENDED)
+ else
device_init_wakeup(&udev->dev, 0);
}
+ udev->state = new_state;
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (device_may_wakeup(&udev->dev)) {
+ if (udev->do_remote_wakeup) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
- dev_dbg(&udev->dev, "usb suspend\n");
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
else {
- dev_dbg(&udev->dev, "usb suspend\n");
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
return status;
/* drive resume for at least 20 msec */
if (udev)
- dev_dbg(&udev->dev, "RESUME\n");
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
msleep(25);
#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
- } else
+ } else {
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
status = finish_port_resume(udev);
+ }
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
return status;
{
int status = 0;
- /* don't repeat RESUME sequence if this device
- * was already woken up by some other task
- */
+ /* All this just to avoid sending a port-resume message
+ * to the parent hub! */
+
usb_lock_device(udev);
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
if (udev->state == USB_STATE_SUSPENDED) {
- dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
/* TRSMRCY = 10 msec */
msleep(10);
status = finish_port_resume(udev);
+ if (status == 0)
+ udev->dev.power.power_state.event = PM_EVENT_ON;
}
+ mutex_unlock(&udev->pm_mutex);
if (status == 0)
- usb_resume_both(udev);
+ usb_autoresume_device(udev, 0);
usb_unlock_device(udev);
return status;
}
== PM_EVENT_ON
#endif
) {
- dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ if (!hdev->auto_pm)
+ dev_dbg(&intf->dev, "port %d nyet suspended\n",
+ port1);
return -EBUSY;
}
}
* stub "device" node was never suspended.
*/
if (i)
- usb_resume_both(hdev);
+ usb_autoresume_device(hdev, 0);
/* If this is an inactive or suspended hub, do nothing */
if (hub->quiescing)
return -EINVAL;
}
+ /* Prevent autosuspend during the reset */
+ usb_autoresume_device(udev, 1);
+
if (iface && iface->condition != USB_INTERFACE_BINDING)
iface = NULL;
}
}
+ usb_autosuspend_device(udev, 1);
return ret;
}
EXPORT_SYMBOL(usb_reset_composite_device);
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff