This capabilities weren't propagated to the radiotap header.
We don't set here the VHT_KNOWN / MCS_HAVE flag because not
all the low level drivers will know how to properly flag
the frames, hence the low level driver will be in charge
of setting IEEE80211_RADIOTAP_MCS_HAVE_FEC,
IEEE80211_RADIOTAP_MCS_HAVE_STBC and / or
IEEE80211_RADIOTAP_VHT_KNOWN_STBC according to its
capabilities.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
#define IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM 0x10
#define IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED 0x20
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER0 0x01
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER1 0x02
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER2 0x04
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER3 0x08
/* helpers */
static inline int ieee80211_get_radiotap_len(unsigned char *data)
* on this subframe
* @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
* is stored in the @ampdu_delimiter_crc field)
+ * @RX_FLAG_LDPC: LDPC was used
* @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
* @RX_FLAG_10MHZ: 10 MHz (half channel) was used
* @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20),
RX_FLAG_MACTIME_END = BIT(21),
RX_FLAG_VHT = BIT(22),
+ RX_FLAG_LDPC = BIT(23),
RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
RX_FLAG_10MHZ = BIT(28),
RX_FLAG_5MHZ = BIT(29),
*pos |= IEEE80211_RADIOTAP_MCS_BW_40;
if (status->flag & RX_FLAG_HT_GF)
*pos |= IEEE80211_RADIOTAP_MCS_FMT_GF;
+ if (status->flag & RX_FLAG_LDPC)
+ *pos |= IEEE80211_RADIOTAP_MCS_FEC_LDPC;
stbc = (status->flag & RX_FLAG_STBC_MASK) >> RX_FLAG_STBC_SHIFT;
*pos |= stbc << IEEE80211_RADIOTAP_MCS_STBC_SHIFT;
pos++;
/* flags */
if (status->flag & RX_FLAG_SHORT_GI)
*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI;
+ /* in VHT, STBC is binary */
+ if (status->flag & RX_FLAG_STBC_MASK)
+ *pos |= IEEE80211_RADIOTAP_VHT_FLAG_STBC;
pos++;
/* bandwidth */
if (status->vht_flag & RX_VHT_FLAG_80MHZ)
*pos = (status->rate_idx << 4) | status->vht_nss;
pos += 4;
/* coding field */
+ if (status->flag & RX_FLAG_LDPC)
+ *pos |= IEEE80211_RADIOTAP_CODING_LDPC_USER0;
pos++;
/* group ID */
pos++;