[WATCHDOG] w83697ug: add error checking

I noticed the W83697UG driver tries to register a watchdog even though
it already noticed the chip isn't there.

WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.
w83697ug/uf WDT: No W83697UG/UF could be found
w83697ug/uf WDT: Watchdog already running. Resetting timeout to 60 sec
w83697ug/uf WDT: cannot register miscdev on minor=130 (err=-16)

Patch propagates the error back to wdt_init().

Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index ada8ad82d993a43b0e5e928148a9bd65919e536a..6972c0a1e4d66731f441ca5104183504a2ef7bc9 100644 (file)
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -79,7 +79,7 @@ MODULE_PARM_DESC(nowayout,
                                                        (same as EFER) */
 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
 
-static void w83697ug_select_wd_register(void)
+static int w83697ug_select_wd_register(void)
 {
        unsigned char c;
        unsigned char version;
@@ -102,7 +102,7 @@ static void w83697ug_select_wd_register(void)
 
        } else {
                printk(KERN_ERR PFX "No W83697UG/UF could be found\n");
-               return;
+               return -ENODEV;
        }
 
        outb_p(0x07, WDT_EFER); /* point to logical device number reg */
@@ -110,6 +110,8 @@ static void w83697ug_select_wd_register(void)
        outb_p(0x30, WDT_EFER); /* select CR30 */
        c = inb_p(WDT_EFDR);
        outb_p(c || 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+
+       return 0;
 }
 
 static void w83697ug_unselect_wd_register(void)
@@ -117,11 +119,14 @@ static void w83697ug_unselect_wd_register(void)
        outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
 }
 
-static void w83697ug_init(void)
+static int w83697ug_init(void)
 {
+       int ret;
        unsigned char t;
 
-       w83697ug_select_wd_register();
+       ret = w83697ug_select_wd_register();
+       if (ret != 0)
+               return ret;
 
        outb_p(0xF6, WDT_EFER); /* Select CRF6 */
        t = inb_p(WDT_EFDR);    /* read CRF6 */
@@ -137,13 +142,15 @@ static void w83697ug_init(void)
        outb_p(t, WDT_EFDR);    /* Write back to CRF5 */
 
        w83697ug_unselect_wd_register();
+       return 0;
 }
 
 static void wdt_ctrl(int timeout)
 {
        spin_lock(&io_lock);
 
-       w83697ug_select_wd_register();
+       if (w83697ug_select_wd_register() < 0)
+               return;
 
        outb_p(0xF4, WDT_EFER);    /* Select CRF4 */
        outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
@@ -347,7 +354,9 @@ static int __init wdt_init(void)
                goto out;
        }
 
-       w83697ug_init();
+       ret = w83697ug_init();
+       if (ret != 0)
+               goto unreg_regions;
 
        ret = register_reboot_notifier(&wdt_notifier);
        if (ret != 0) {