dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
-dts-dirs := stingray
+dts-dirs += northstar2
+dts-dirs += stingray
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
--- /dev/null
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ lcpll_ddr: lcpll_ddr@6501d058 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ddr";
+ reg = <0x6501d058 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d04c 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+ "ddr", "ddr_ch2_unused",
+ "ddr_ch3_unused", "ddr_ch4_unused",
+ "ddr_ch5_unused";
+ };
+
+ lcpll_ports: lcpll_ports@6501d078 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ports";
+ reg = <0x6501d078 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d054 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ports", "wan", "rgmii",
+ "ports_ch2_unused",
+ "ports_ch3_unused",
+ "ports_ch4_unused",
+ "ports_ch5_unused";
+ };
+
+ genpll_scr: genpll_scr@6501d098 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-scr";
+ reg = <0x6501d098 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_scr", "scr", "fs",
+ "audio_ref", "scr_ch3_unused",
+ "scr_ch4_unused", "scr_ch5_unused";
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ genpll_sw: genpll_sw@6501d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-sw";
+ reg = <0x6501d0c4 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_sw", "rpe", "250", "nic",
+ "chimp", "port", "sdio";
+ };
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 SVK";
+ compatible = "brcm,ns2-svk", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ serial1 = &uart0;
+ serial2 = &uart1;
+ serial3 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x66130000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+ };
+};
+
+&enet {
+ status = "okay";
+};
+
+&pci_phy0 {
+ status = "okay";
+};
+
+&pci_phy1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie4 {
+ status = "okay";
+};
+
+&pcie8 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ssp0 {
+ status = "okay";
+
+ slic@0 {
+ compatible = "silabs,si3226x";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha = <1>;
+ spi-cpol = <1>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable = <0>;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <1>;
+ pl022,tx-level-trig = <1>;
+ pl022,ctrl-len = <11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+};
+
+&ssp1 {
+ status = "okay";
+
+ at25@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ at25,byte-len = <0x8000>;
+ at25,addr-mode = <2>;
+ at25,page-size = <64>;
+ spi-cpha = <1>;
+ spi-cpol = <1>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable = <0>;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <1>;
+ pl022,tx-level-trig = <1>;
+ pl022,ctrl-len = <11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+};
+
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata_phy1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sdio0 {
+ status = "okay";
+};
+
+&sdio1 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ enet-phy-lane-swap;
+ reg = <0x10>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 XMC";
+ compatible = "brcm,ns2-xmc", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x66130000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+ };
+};
+
+&enet {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ reg = <0x10>;
+ };
+ };
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00280000>; /* 2.5MB */
+ read-only;
+ };
+
+ partition@280000 {
+ label = "nenv";
+ reg = <0x00280000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "ndtb";
+ reg = <0x002c0000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@300000 {
+ label = "nsystem";
+ reg = <0x00300000 0x03d00000>; /* 61MB */
+ read-only;
+ };
+
+ partition@4000000 {
+ label = "nrootfs";
+ reg = <0x04000000 0x06400000>; /* 100MB */
+ };
+
+ partition@0a400000{
+ label = "ncustfs";
+ reg = <0x0a400000 0x35c00000>; /* 860MB */
+ };
+ };
+};
+
+&pci_phy0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie8 {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata_phy1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&qspi {
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+ reg = <0x0 0x0>;
+
+ partition@0 {
+ label = "bl0";
+ reg = <0x00000000 0x00080000>; /* 512KB */
+ };
+
+ partition@80000 {
+ label = "fip";
+ reg = <0x00080000 0x00150000>; /* 1344KB */
+ };
+
+ partition@1e0000 {
+ label = "env";
+ reg = <0x001e0000 0x00010000>;/* 64KB */
+ };
+
+ partition@1f0000 {
+ label = "dtb";
+ reg = <0x001f0000 0x00010000>; /* 64KB */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x00200000 0x00e00000>; /* 14MB */
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x01000000>; /* 16MB */
+ };
+ };
+};
+
+&uart3 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (c) 2015 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/memreserve/ 0x81000000 0x00200000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/bcm-ns2.h>
+
+/ {
+ compatible = "brcm,ns2";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 0>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ A57_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 1>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ A57_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 2>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ A57_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 3>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ CLUSTER0_L2: l2-cache@000 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>,
+ <&A57_2>,
+ <&A57_3>;
+ };
+
+ pcie0: pcie@20020000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0 0x20020000 0 0x1000>;
+ dma-coherent;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
+
+ brcm,pcie-ob;
+ brcm,pcie-ob-oarr-size;
+ brcm,pcie-ob-axi-offset = <0x00000000>;
+ brcm,pcie-ob-window-size = <256>;
+
+ status = "disabled";
+
+ phys = <&pci_phy0>;
+ phy-names = "pcie-phy";
+
+ msi-parent = <&v2m0>;
+ };
+
+ pcie4: pcie@50020000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0 0x50020000 0 0x1000>;
+ dma-coherent;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <4>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
+
+ brcm,pcie-ob;
+ brcm,pcie-ob-oarr-size;
+ brcm,pcie-ob-axi-offset = <0x30000000>;
+ brcm,pcie-ob-window-size = <256>;
+
+ status = "disabled";
+
+ phys = <&pci_phy1>;
+ phy-names = "pcie-phy";
+
+ msi-parent = <&v2m0>;
+ };
+
+ pcie8: pcie@60c00000 {
+ compatible = "brcm,iproc-pcie-paxc";
+ reg = <0 0x60c00000 0 0x1000>;
+ dma-coherent;
+ linux,pci-domain = <8>;
+
+ bus-range = <0x0 0x1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
+
+ status = "disabled";
+
+ msi-parent = <&v2m0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ #include "ns2-clock.dtsi"
+
+ enet: ethernet@61000000 {
+ compatible = "brcm,ns2-amac";
+ reg = <0x61000000 0x1000>,
+ <0x61090000 0x1000>,
+ <0x61030000 0x100>;
+ reg-names = "amac_base", "idm_base", "nicpm_base";
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ phy-handle = <&gphy0>;
+ phy-mode = "rgmii";
+ status = "disabled";
+ };
+
+ pdc0: iproc-pdc0@612c0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x612c0000 0x445>; /* PDC FS0 regs */
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ crypto0: crypto@612d0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612d0000 0x900>;
+ mboxes = <&pdc0 0>;
+ };
+
+ pdc1: iproc-pdc1@612e0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x612e0000 0x445>; /* PDC FS1 regs */
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ crypto1: crypto@612f0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612f0000 0x900>;
+ mboxes = <&pdc1 0>;
+ };
+
+ pdc2: iproc-pdc2@61300000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x61300000 0x445>; /* PDC FS2 regs */
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ crypto2: crypto@61310000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61310000 0x900>;
+ mboxes = <&pdc2 0>;
+ };
+
+ pdc3: iproc-pdc3@61320000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x61320000 0x445>; /* PDC FS3 regs */
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ crypto3: crypto@61330000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61330000 0x900>;
+ mboxes = <&pdc3 0>;
+ };
+
+ dma0: dma@61360000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x61360000 0x1000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&iprocslow>;
+ clock-names = "apb_pclk";
+ };
+
+ smmu: mmu@64000000 {
+ compatible = "arm,mmu-500";
+ reg = <0x64000000 0x40000>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ };
+
+ pinctrl: pinctrl@6501d130 {
+ compatible = "brcm,ns2-pinmux";
+ reg = <0x6501d130 0x08>,
+ <0x660a0028 0x04>,
+ <0x660009b0 0x40>;
+ };
+
+ gpio_aon: gpio@65024800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x65024800 0x50>,
+ <0x65024008 0x18>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ gic: interrupt-controller@65210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x65210000 0x1000>,
+ <0x65220000 0x1000>,
+ <0x65240000 0x2000>,
+ <0x65260000 0x1000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x652e0000 0x80000>;
+
+ v2m0: v2m@00000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x00000 0x1000>;
+ arm,msi-base-spi = <72>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m1: v2m@10000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x10000 0x1000>;
+ arm,msi-base-spi = <88>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m2: v2m@20000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x20000 0x1000>;
+ arm,msi-base-spi = <104>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m3: v2m@30000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x30000 0x1000>;
+ arm,msi-base-spi = <120>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m4: v2m@40000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x40000 0x1000>;
+ arm,msi-base-spi = <136>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m5: v2m@50000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x50000 0x1000>;
+ arm,msi-base-spi = <152>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m6: v2m@60000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x60000 0x1000>;
+ arm,msi-base-spi = <168>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m7: v2m@70000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x70000 0x1000>;
+ arm,msi-base-spi = <184>;
+ arm,msi-num-spis = <16>;
+ };
+ };
+
+ cci@65590000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x65590000 0x1000>;
+ ranges = <0 0x65590000 0x10000>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1",
+ "arm,cci-400-pmu";
+ reg = <0x9000 0x4000>;
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ status = "disabled";
+ };
+
+ pwm: pwm@66010000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x66010000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ mdio_mux_iproc: mdio-mux@6602023c {
+ compatible = "brcm,mdio-mux-iproc";
+ reg = <0x6602023c 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci_phy0: pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ mdio@7 {
+ reg = <0x7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci_phy1: pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ mdio@10 {
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ timer0: timer@66030000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x66030000 0x1000>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>,
+ <&iprocslow>,
+ <&iprocslow>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer1: timer@66040000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x66040000 0x1000>;
+ interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>,
+ <&iprocslow>,
+ <&iprocslow>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer2: timer@66050000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x66050000 0x1000>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>,
+ <&iprocslow>,
+ <&iprocslow>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer3: timer@66060000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x66060000 0x1000>;
+ interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>,
+ <&iprocslow>,
+ <&iprocslow>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ i2c0: i2c@66080000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x66080000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@66090000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x66090000 0x1000>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>, <&iprocslow>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ gpio_g: gpio@660a0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x660a0000 0x50>;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c1: i2c@660b0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x660b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ uart0: serial@66100000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66100000 0x100>;
+ interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@66110000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66110000 0x100>;
+ interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@66120000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66120000 0x100>;
+ interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@66130000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66130000 0x100>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@66180000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x66180000 0x1000>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>, <&iprocslow>;
+ clock-names = "spiclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@66190000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x66190000 0x1000>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>, <&iprocslow>;
+ clock-names = "spiclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hwrng: hwrng@66220000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x66220000 0x28>;
+ };
+
+ sata_phy: sata_phy@663f0100 {
+ compatible = "brcm,iproc-ns2-sata-phy";
+ reg = <0x663f0100 0x1f00>,
+ <0x663f004c 0x10>;
+ reg-names = "phy", "phy-ctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ sata: ahci@663f2000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x663f2000 0x1000>;
+ dma-coherent;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sdio0: sdhci@66420000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x66420000 0x100>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ bus-width = <8>;
+ clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+ status = "disabled";
+ };
+
+ sdio1: sdhci@66430000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x66430000 0x100>;
+ interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ bus-width = <8>;
+ clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+ status = "disabled";
+ };
+
+ nand: nand@66460000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x66460000 0x600>,
+ <0x67015408 0x600>,
+ <0x66460f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ qspi: spi@66470200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright (c) 2016 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/clock/bcm-ns2.h>
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- lcpll_ddr: lcpll_ddr@6501d058 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ddr";
- reg = <0x6501d058 0x20>,
- <0x6501c020 0x4>,
- <0x6501d04c 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ddr", "pcie_sata_usb",
- "ddr", "ddr_ch2_unused",
- "ddr_ch3_unused", "ddr_ch4_unused",
- "ddr_ch5_unused";
- };
-
- lcpll_ports: lcpll_ports@6501d078 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ports";
- reg = <0x6501d078 0x20>,
- <0x6501c020 0x4>,
- <0x6501d054 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ports", "wan", "rgmii",
- "ports_ch2_unused",
- "ports_ch3_unused",
- "ports_ch4_unused",
- "ports_ch5_unused";
- };
-
- genpll_scr: genpll_scr@6501d098 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-scr";
- reg = <0x6501d098 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_scr", "scr", "fs",
- "audio_ref", "scr_ch3_unused",
- "scr_ch4_unused", "scr_ch5_unused";
- };
-
- iprocmed: iprocmed {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- iprocslow: iprocslow {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- genpll_sw: genpll_sw@6501d0c4 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-sw";
- reg = <0x6501d0c4 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_sw", "rpe", "250", "nic",
- "chimp", "port", "sdio";
- };
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "ns2.dtsi"
-
-/ {
- model = "Broadcom NS2 SVK";
- compatible = "brcm,ns2-svk", "brcm,ns2";
-
- aliases {
- serial0 = &uart3;
- serial1 = &uart0;
- serial2 = &uart1;
- serial3 = &uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x66130000";
- };
-
- memory {
- device_type = "memory";
- reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
- };
-};
-
-&enet {
- status = "okay";
-};
-
-&pci_phy0 {
- status = "okay";
-};
-
-&pci_phy1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie4 {
- status = "okay";
-};
-
-&pcie8 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&ssp0 {
- status = "okay";
-
- slic@0 {
- compatible = "silabs,si3226x";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpha = <1>;
- spi-cpol = <1>;
- pl022,hierarchy = <0>;
- pl022,interface = <0>;
- pl022,slave-tx-disable = <0>;
- pl022,com-mode = <0>;
- pl022,rx-level-trig = <1>;
- pl022,tx-level-trig = <1>;
- pl022,ctrl-len = <11>;
- pl022,wait-state = <0>;
- pl022,duplex = <0>;
- };
-};
-
-&ssp1 {
- status = "okay";
-
- at25@0 {
- compatible = "atmel,at25";
- reg = <0>;
- spi-max-frequency = <5000000>;
- at25,byte-len = <0x8000>;
- at25,addr-mode = <2>;
- at25,page-size = <64>;
- spi-cpha = <1>;
- spi-cpol = <1>;
- pl022,hierarchy = <0>;
- pl022,interface = <0>;
- pl022,slave-tx-disable = <0>;
- pl022,com-mode = <0>;
- pl022,rx-level-trig = <1>;
- pl022,tx-level-trig = <1>;
- pl022,ctrl-len = <11>;
- pl022,wait-state = <0>;
- pl022,duplex = <0>;
- };
-};
-
-&sata_phy0 {
- status = "okay";
-};
-
-&sata_phy1 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&sdio0 {
- status = "okay";
-};
-
-&sdio1 {
- status = "okay";
-};
-
-&nand {
- nandcs@0 {
- compatible = "brcm,nandcs";
- reg = <0>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <16>;
- brcm,nand-oob-sector-size = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&mdio_mux_iproc {
- mdio@10 {
- gphy0: eth-phy@10 {
- enet-phy-lane-swap;
- reg = <0x10>;
- };
- };
-};
-
-&pinctrl {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_sel>;
- nand_sel: nand_sel {
- function = "nand";
- groups = "nand_grp";
- };
-};
-
-&qspi {
- bspi-sel = <0>;
- flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "m25p80";
- reg = <0x0>;
- spi-max-frequency = <12500000>;
- m25p,fast-read;
- spi-cpol;
- spi-cpha;
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x000a0000>;
- };
-
- partition@a0000 {
- label = "env";
- reg = <0x000a0000 0x00060000>;
- };
-
- partition@100000 {
- label = "system";
- reg = <0x00100000 0x00600000>;
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x00700000 0x01900000>;
- };
- };
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2016 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "ns2.dtsi"
-
-/ {
- model = "Broadcom NS2 XMC";
- compatible = "brcm,ns2-xmc", "brcm,ns2";
-
- aliases {
- serial0 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x66130000";
- };
-
- memory {
- device_type = "memory";
- reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
- };
-};
-
-&enet {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&mdio_mux_iproc {
- mdio@10 {
- gphy0: eth-phy@10 {
- reg = <0x10>;
- };
- };
-};
-
-&nand {
- nandcs@0 {
- compatible = "brcm,nandcs";
- reg = <0>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <16>;
- brcm,nand-oob-sector-size = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "nboot";
- reg = <0x00000000 0x00280000>; /* 2.5MB */
- read-only;
- };
-
- partition@280000 {
- label = "nenv";
- reg = <0x00280000 0x00040000>; /* 0.25MB */
- read-only;
- };
-
- partition@2c0000 {
- label = "ndtb";
- reg = <0x002c0000 0x00040000>; /* 0.25MB */
- read-only;
- };
-
- partition@300000 {
- label = "nsystem";
- reg = <0x00300000 0x03d00000>; /* 61MB */
- read-only;
- };
-
- partition@4000000 {
- label = "nrootfs";
- reg = <0x04000000 0x06400000>; /* 100MB */
- };
-
- partition@0a400000{
- label = "ncustfs";
- reg = <0x0a400000 0x35c00000>; /* 860MB */
- };
- };
-};
-
-&pci_phy0 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie8 {
- status = "okay";
-};
-
-&sata_phy0 {
- status = "okay";
-};
-
-&sata_phy1 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&qspi {
- flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "m25p80";
- spi-max-frequency = <62500000>;
- m25p,default-addr-width = <3>;
- reg = <0x0 0x0>;
-
- partition@0 {
- label = "bl0";
- reg = <0x00000000 0x00080000>; /* 512KB */
- };
-
- partition@80000 {
- label = "fip";
- reg = <0x00080000 0x00150000>; /* 1344KB */
- };
-
- partition@1e0000 {
- label = "env";
- reg = <0x001e0000 0x00010000>;/* 64KB */
- };
-
- partition@1f0000 {
- label = "dtb";
- reg = <0x001f0000 0x00010000>; /* 64KB */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x00200000 0x00e00000>; /* 14MB */
- };
-
- partition@1000000 {
- label = "rootfs";
- reg = <0x01000000 0x01000000>; /* 16MB */
- };
- };
-};
-
-&uart3 {
- status = "okay";
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright (c) 2015 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/memreserve/ 0x81000000 0x00200000;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/bcm-ns2.h>
-
-/ {
- compatible = "brcm,ns2";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- A57_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
- reg = <0 0>;
- enable-method = "psci";
- next-level-cache = <&CLUSTER0_L2>;
- };
-
- A57_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
- reg = <0 1>;
- enable-method = "psci";
- next-level-cache = <&CLUSTER0_L2>;
- };
-
- A57_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
- reg = <0 2>;
- enable-method = "psci";
- next-level-cache = <&CLUSTER0_L2>;
- };
-
- A57_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
- reg = <0 3>;
- enable-method = "psci";
- next-level-cache = <&CLUSTER0_L2>;
- };
-
- CLUSTER0_L2: l2-cache@000 {
- compatible = "cache";
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&A57_0>,
- <&A57_1>,
- <&A57_2>,
- <&A57_3>;
- };
-
- pcie0: pcie@20020000 {
- compatible = "brcm,iproc-pcie";
- reg = <0 0x20020000 0 0x1000>;
- dma-coherent;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
-
- linux,pci-domain = <0>;
-
- bus-range = <0x00 0xff>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
-
- brcm,pcie-ob;
- brcm,pcie-ob-oarr-size;
- brcm,pcie-ob-axi-offset = <0x00000000>;
- brcm,pcie-ob-window-size = <256>;
-
- status = "disabled";
-
- phys = <&pci_phy0>;
- phy-names = "pcie-phy";
-
- msi-parent = <&v2m0>;
- };
-
- pcie4: pcie@50020000 {
- compatible = "brcm,iproc-pcie";
- reg = <0 0x50020000 0 0x1000>;
- dma-coherent;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
-
- linux,pci-domain = <4>;
-
- bus-range = <0x00 0xff>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
-
- brcm,pcie-ob;
- brcm,pcie-ob-oarr-size;
- brcm,pcie-ob-axi-offset = <0x30000000>;
- brcm,pcie-ob-window-size = <256>;
-
- status = "disabled";
-
- phys = <&pci_phy1>;
- phy-names = "pcie-phy";
-
- msi-parent = <&v2m0>;
- };
-
- pcie8: pcie@60c00000 {
- compatible = "brcm,iproc-pcie-paxc";
- reg = <0 0x60c00000 0 0x1000>;
- dma-coherent;
- linux,pci-domain = <8>;
-
- bus-range = <0x0 0x1>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
-
- status = "disabled";
-
- msi-parent = <&v2m0>;
- };
-
- soc: soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
-
- #include "ns2-clock.dtsi"
-
- enet: ethernet@61000000 {
- compatible = "brcm,ns2-amac";
- reg = <0x61000000 0x1000>,
- <0x61090000 0x1000>,
- <0x61030000 0x100>;
- reg-names = "amac_base", "idm_base", "nicpm_base";
- interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- phy-handle = <&gphy0>;
- phy-mode = "rgmii";
- status = "disabled";
- };
-
- pdc0: iproc-pdc0@612c0000 {
- compatible = "brcm,iproc-pdc-mbox";
- reg = <0x612c0000 0x445>; /* PDC FS0 regs */
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- dma-coherent;
- brcm,rx-status-len = <32>;
- brcm,use-bcm-hdr;
- };
-
- crypto0: crypto@612d0000 {
- compatible = "brcm,spum-crypto";
- reg = <0x612d0000 0x900>;
- mboxes = <&pdc0 0>;
- };
-
- pdc1: iproc-pdc1@612e0000 {
- compatible = "brcm,iproc-pdc-mbox";
- reg = <0x612e0000 0x445>; /* PDC FS1 regs */
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- dma-coherent;
- brcm,rx-status-len = <32>;
- brcm,use-bcm-hdr;
- };
-
- crypto1: crypto@612f0000 {
- compatible = "brcm,spum-crypto";
- reg = <0x612f0000 0x900>;
- mboxes = <&pdc1 0>;
- };
-
- pdc2: iproc-pdc2@61300000 {
- compatible = "brcm,iproc-pdc-mbox";
- reg = <0x61300000 0x445>; /* PDC FS2 regs */
- interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- dma-coherent;
- brcm,rx-status-len = <32>;
- brcm,use-bcm-hdr;
- };
-
- crypto2: crypto@61310000 {
- compatible = "brcm,spum-crypto";
- reg = <0x61310000 0x900>;
- mboxes = <&pdc2 0>;
- };
-
- pdc3: iproc-pdc3@61320000 {
- compatible = "brcm,iproc-pdc-mbox";
- reg = <0x61320000 0x445>; /* PDC FS3 regs */
- interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- dma-coherent;
- brcm,rx-status-len = <32>;
- brcm,use-bcm-hdr;
- };
-
- crypto3: crypto@61330000 {
- compatible = "brcm,spum-crypto";
- reg = <0x61330000 0x900>;
- mboxes = <&pdc3 0>;
- };
-
- dma0: dma@61360000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x61360000 0x1000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- clocks = <&iprocslow>;
- clock-names = "apb_pclk";
- };
-
- smmu: mmu@64000000 {
- compatible = "arm,mmu-500";
- reg = <0x64000000 0x40000>;
- #global-interrupts = <2>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
- };
-
- pinctrl: pinctrl@6501d130 {
- compatible = "brcm,ns2-pinmux";
- reg = <0x6501d130 0x08>,
- <0x660a0028 0x04>,
- <0x660009b0 0x40>;
- };
-
- gpio_aon: gpio@65024800 {
- compatible = "brcm,iproc-gpio";
- reg = <0x65024800 0x50>,
- <0x65024008 0x18>;
- ngpios = <6>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- gic: interrupt-controller@65210000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x65210000 0x1000>,
- <0x65220000 0x1000>,
- <0x65240000 0x2000>,
- <0x65260000 0x1000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
- IRQ_TYPE_LEVEL_HIGH)>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x652e0000 0x80000>;
-
- v2m0: v2m@00000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x00000 0x1000>;
- arm,msi-base-spi = <72>;
- arm,msi-num-spis = <16>;
- };
-
- v2m1: v2m@10000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x10000 0x1000>;
- arm,msi-base-spi = <88>;
- arm,msi-num-spis = <16>;
- };
-
- v2m2: v2m@20000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x20000 0x1000>;
- arm,msi-base-spi = <104>;
- arm,msi-num-spis = <16>;
- };
-
- v2m3: v2m@30000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x30000 0x1000>;
- arm,msi-base-spi = <120>;
- arm,msi-num-spis = <16>;
- };
-
- v2m4: v2m@40000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x40000 0x1000>;
- arm,msi-base-spi = <136>;
- arm,msi-num-spis = <16>;
- };
-
- v2m5: v2m@50000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x50000 0x1000>;
- arm,msi-base-spi = <152>;
- arm,msi-num-spis = <16>;
- };
-
- v2m6: v2m@60000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x60000 0x1000>;
- arm,msi-base-spi = <168>;
- arm,msi-num-spis = <16>;
- };
-
- v2m7: v2m@70000 {
- compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
- msi-controller;
- reg = <0x70000 0x1000>;
- arm,msi-base-spi = <184>;
- arm,msi-num-spis = <16>;
- };
- };
-
- cci@65590000 {
- compatible = "arm,cci-400";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x65590000 0x1000>;
- ranges = <0 0x65590000 0x10000>;
-
- pmu@9000 {
- compatible = "arm,cci-400-pmu,r1",
- "arm,cci-400-pmu";
- reg = <0x9000 0x4000>;
- interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- usbdrd_phy: phy@66000960 {
- #phy-cells = <0>;
- compatible = "brcm,ns2-drd-phy";
- reg = <0x66000960 0x24>,
- <0x67012800 0x4>,
- <0x6501d148 0x4>,
- <0x664d0700 0x4>;
- reg-names = "icfg", "rst-ctrl",
- "crmu-ctrl", "usb2-strap";
- id-gpios = <&gpio_g 30 0>;
- vbus-gpios = <&gpio_g 31 0>;
- status = "disabled";
- };
-
- pwm: pwm@66010000 {
- compatible = "brcm,iproc-pwm";
- reg = <0x66010000 0x28>;
- clocks = <&osc>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- mdio_mux_iproc: mdio-mux@6602023c {
- compatible = "brcm,mdio-mux-iproc";
- reg = <0x6602023c 0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio@0 {
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pci_phy0: pci-phy@0 {
- compatible = "brcm,ns2-pcie-phy";
- reg = <0x0>;
- #phy-cells = <0>;
- status = "disabled";
- };
- };
-
- mdio@7 {
- reg = <0x7>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pci_phy1: pci-phy@0 {
- compatible = "brcm,ns2-pcie-phy";
- reg = <0x0>;
- #phy-cells = <0>;
- status = "disabled";
- };
- };
-
- mdio@10 {
- reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- timer0: timer@66030000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x66030000 0x1000>;
- interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>,
- <&iprocslow>,
- <&iprocslow>;
- clock-names = "timer1", "timer2", "apb_pclk";
- };
-
- timer1: timer@66040000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x66040000 0x1000>;
- interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>,
- <&iprocslow>,
- <&iprocslow>;
- clock-names = "timer1", "timer2", "apb_pclk";
- };
-
- timer2: timer@66050000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x66050000 0x1000>;
- interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>,
- <&iprocslow>,
- <&iprocslow>;
- clock-names = "timer1", "timer2", "apb_pclk";
- };
-
- timer3: timer@66060000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x66060000 0x1000>;
- interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>,
- <&iprocslow>,
- <&iprocslow>;
- clock-names = "timer1", "timer2", "apb_pclk";
- };
-
- i2c0: i2c@66080000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x66080000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- wdt0: watchdog@66090000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x66090000 0x1000>;
- interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>, <&iprocslow>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- gpio_g: gpio@660a0000 {
- compatible = "brcm,iproc-gpio";
- reg = <0x660a0000 0x50>;
- ngpios = <32>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- i2c1: i2c@660b0000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x660b0000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- uart0: serial@66100000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x66100000 0x100>;
- interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart1: serial@66110000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x66110000 0x100>;
- interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart2: serial@66120000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x66120000 0x100>;
- interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart3: serial@66130000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x66130000 0x100>;
- interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&osc>;
- status = "disabled";
- };
-
- ssp0: ssp@66180000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x66180000 0x1000>;
- interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>, <&iprocslow>;
- clock-names = "spiclk", "apb_pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- ssp1: ssp@66190000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x66190000 0x1000>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>, <&iprocslow>;
- clock-names = "spiclk", "apb_pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- hwrng: hwrng@66220000 {
- compatible = "brcm,iproc-rng200";
- reg = <0x66220000 0x28>;
- };
-
- sata_phy: sata_phy@663f0100 {
- compatible = "brcm,iproc-ns2-sata-phy";
- reg = <0x663f0100 0x1f00>,
- <0x663f004c 0x10>;
- reg-names = "phy", "phy-ctrl";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- sata_phy1: sata-phy@1 {
- reg = <1>;
- #phy-cells = <0>;
- status = "disabled";
- };
- };
-
- sata: ahci@663f2000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x663f2000 0x1000>;
- dma-coherent;
- reg-names = "ahci";
- interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata0: sata-port@0 {
- reg = <0>;
- phys = <&sata_phy0>;
- phy-names = "sata-phy";
- };
-
- sata1: sata-port@1 {
- reg = <1>;
- phys = <&sata_phy1>;
- phy-names = "sata-phy";
- };
- };
-
- sdio0: sdhci@66420000 {
- compatible = "brcm,sdhci-iproc-cygnus";
- reg = <0x66420000 0x100>;
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- bus-width = <8>;
- clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
- status = "disabled";
- };
-
- sdio1: sdhci@66430000 {
- compatible = "brcm,sdhci-iproc-cygnus";
- reg = <0x66430000 0x100>;
- interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- bus-width = <8>;
- clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
- status = "disabled";
- };
-
- nand: nand@66460000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
- reg = <0x66460000 0x600>,
- <0x67015408 0x600>,
- <0x66460f00 0x20>;
- reg-names = "nand", "iproc-idm", "iproc-ext";
- interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- brcm,nand-has-wp;
- };
-
- qspi: spi@66470200 {
- compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
- reg = <0x66470200 0x184>,
- <0x66470000 0x124>,
- <0x67017408 0x004>,
- <0x664703a0 0x01c>;
- reg-names = "mspi", "bspi", "intr_regs",
- "intr_status_reg";
- interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "spi_l1_intr";
- clocks = <&iprocmed>;
- clock-names = "iprocmed";
- num-cs = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-};
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff