All the supported firmwares have this flag set.
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
* from the probe request template.
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
- * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
- * containing CAM (Continuous Active Mode) indication.
* @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in different bindings.
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
- IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD = BIT(20),
IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
IWL_DEBUG_POWER(mvm, "tx_data_timeout=%d\n", val);
dbgfs_pm->tx_data_timeout = val;
break;
- case MVM_DEBUGFS_PM_DISABLE_POWER_OFF:
- IWL_DEBUG_POWER(mvm, "disable_power_off=%d\n", val);
- dbgfs_pm->disable_power_off = val;
- break;
case MVM_DEBUGFS_PM_LPRX_ENA:
IWL_DEBUG_POWER(mvm, "lprx %s\n", val ? "enabled" : "disabled");
dbgfs_pm->lprx_ena = val;
if (sscanf(buf + 16, "%d", &val) != 1)
return -EINVAL;
param = MVM_DEBUGFS_PM_TX_DATA_TIMEOUT;
- } else if (!strncmp("disable_power_off=", buf, 18) &&
- !(mvm->fw->ucode_capa.flags &
- IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD)) {
- if (sscanf(buf + 18, "%d", &val) != 1)
- return -EINVAL;
- param = MVM_DEBUGFS_PM_DISABLE_POWER_OFF;
} else if (!strncmp("lprx=", buf, 5)) {
if (sscanf(buf + 5, "%d", &val) != 1)
return -EINVAL;
MVM_DEBUGFS_ADD_FILE(fw_error_dump, dbgfs_dir, S_IRUSR);
MVM_DEBUGFS_ADD_FILE(bt_notif, dbgfs_dir, S_IRUSR);
MVM_DEBUGFS_ADD_FILE(bt_cmd, dbgfs_dir, S_IRUSR);
- if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD)
- MVM_DEBUGFS_ADD_FILE(disable_power_off, mvm->debugfs_dir,
- S_IRUSR | S_IWUSR);
+ MVM_DEBUGFS_ADD_FILE(disable_power_off, mvm->debugfs_dir,
+ S_IRUSR | S_IWUSR);
MVM_DEBUGFS_ADD_FILE(fw_rx_stats, mvm->debugfs_dir, S_IRUSR);
MVM_DEBUGFS_ADD_FILE(drv_rx_stats, mvm->debugfs_dir, S_IRUSR);
MVM_DEBUGFS_ADD_FILE(fw_restart, mvm->debugfs_dir, S_IWUSR);
MVM_DEBUGFS_PM_SKIP_DTIM_PERIODS = BIT(2),
MVM_DEBUGFS_PM_RX_DATA_TIMEOUT = BIT(3),
MVM_DEBUGFS_PM_TX_DATA_TIMEOUT = BIT(4),
- MVM_DEBUGFS_PM_DISABLE_POWER_OFF = BIT(5),
MVM_DEBUGFS_PM_LPRX_ENA = BIT(6),
MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD = BIT(7),
MVM_DEBUGFS_PM_SNOOZE_ENABLE = BIT(8),
u32 tx_data_timeout;
bool skip_over_dtim;
u8 skip_dtim_periods;
- bool disable_power_off;
bool lprx_ena;
u32 lprx_rssi_threshold;
bool snooze_ena;
cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_DISABLE_POWER_OFF &&
- mvmvif->dbgfs_pm.disable_power_off)
- cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
-#endif
if (!vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif) ||
!mvmvif->pm_enabled)
return;
.flags = cpu_to_le16(DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK),
};
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD))
- return 0;
-
if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
mvm->ps_disabled = true;
memcpy(&cmd, &mvmvif->mac_pwr_cmd, sizeof(cmd));
mutex_unlock(&mvm->mutex);
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD))
- pos += scnprintf(buf+pos, bufsz-pos, "disable_power_off = %d\n",
- (cmd.flags &
- cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK)) ?
- 0 : 1);
pos += scnprintf(buf+pos, bufsz-pos, "power_scheme = %d\n",
iwlmvm_mod_params.power_scheme);
pos += scnprintf(buf+pos, bufsz-pos, "flags = 0x%x\n",