result = SMUM_WAIT_FIELD_UNEQUAL(smumgr,
SMU_MP1_SRBM2P_RESP_0, CONTENT, 0);
if (result != 0) {
- printk(KERN_ERR "[ powerplay ] cz_send_msg_to_smc_async failed\n");
+ pr_err("cz_send_msg_to_smc_async failed\n");
return result;
}
return -EINVAL;
if (0 != (3 & smc_address)) {
- printk(KERN_ERR "[ powerplay ] SMC address must be 4 byte aligned\n");
+ pr_err("SMC address must be 4 byte aligned\n");
return -EINVAL;
}
if (limit <= (smc_address + 3)) {
- printk(KERN_ERR "[ powerplay ] SMC address beyond the SMC RAM area\n");
+ pr_err("SMC address beyond the SMC RAM area\n");
return -EINVAL;
}
uint32_t smc_address;
if (!smumgr->reload_fw) {
- printk(KERN_INFO "[ powerplay ] skip reloading...\n");
+ pr_info("skip reloading...\n");
return 0;
}
}
if (i >= smumgr->usec_timeout) {
- printk(KERN_ERR "[ powerplay ] SMU check loaded firmware failed.\n");
+ pr_err("SMU check loaded firmware failed.\n");
return -EINVAL;
}
ret = cz_request_smu_load_fw(smumgr);
if (ret)
- printk(KERN_ERR "[ powerplay] SMU firmware load failed\n");
+ pr_err("SMU firmware load failed\n");
cz_check_fw_load_finish(smumgr, fw_to_check);
ret = cz_load_mec_firmware(smumgr);
if (ret)
- printk(KERN_ERR "[ powerplay ] Mec Firmware load failed\n");
+ pr_err("Mec Firmware load failed\n");
return ret;
}
break;
if (i >= cz_smu->scratch_buffer_length) {
- printk(KERN_ERR "[ powerplay ] Invalid Firmware Type\n");
+ pr_err("Invalid Firmware Type\n");
return -EINVAL;
}
break;
if (i >= cz_smu->driver_buffer_length) {
- printk(KERN_ERR "[ powerplay ] Invalid Firmware Type\n");
+ pr_err("Invalid Firmware Type\n");
return -EINVAL;
}
CZ_SCRATCH_ENTRY_UCODE_ID_RLC_SCRATCH,
UCODE_ID_RLC_SCRATCH_SIZE_BYTE,
&cz_smu->scratch_buffer[cz_smu->scratch_buffer_length++])) {
- printk(KERN_ERR "[ powerplay ] Error when Populate Firmware Entry.\n");
+ pr_err("Error when Populate Firmware Entry.\n");
return -1;
}
CZ_SCRATCH_ENTRY_UCODE_ID_RLC_SRM_ARAM,
UCODE_ID_RLC_SRM_ARAM_SIZE_BYTE,
&cz_smu->scratch_buffer[cz_smu->scratch_buffer_length++])) {
- printk(KERN_ERR "[ powerplay ] Error when Populate Firmware Entry.\n");
+ pr_err("Error when Populate Firmware Entry.\n");
return -1;
}
if (0 != cz_smu_populate_single_scratch_entry(smumgr,
CZ_SCRATCH_ENTRY_UCODE_ID_RLC_SRM_DRAM,
UCODE_ID_RLC_SRM_DRAM_SIZE_BYTE,
&cz_smu->scratch_buffer[cz_smu->scratch_buffer_length++])) {
- printk(KERN_ERR "[ powerplay ] Error when Populate Firmware Entry.\n");
+ pr_err("Error when Populate Firmware Entry.\n");
return -1;
}
CZ_SCRATCH_ENTRY_UCODE_ID_POWER_PROFILING,
sizeof(struct SMU8_MultimediaPowerLogData),
&cz_smu->scratch_buffer[cz_smu->scratch_buffer_length++])) {
- printk(KERN_ERR "[ powerplay ] Error when Populate Firmware Entry.\n");
+ pr_err("Error when Populate Firmware Entry.\n");
return -1;
}
CZ_SCRATCH_ENTRY_SMU8_FUSION_CLKTABLE,
sizeof(struct SMU8_Fusion_ClkTable),
&cz_smu->scratch_buffer[cz_smu->scratch_buffer_length++])) {
- printk(KERN_ERR "[ powerplay ] Error when Populate Firmware Entry.\n");
+ pr_err("Error when Populate Firmware Entry.\n");
return -1;
}
cz_smu_construct_toc(smumgr);
return offsetof(SMU73_Discrete_DpmTable, LowSclkInterruptThreshold);
}
}
- printk(KERN_WARNING "can't get the offset of type %x member %x\n", type, member);
+ pr_warning("can't get the offset of type %x member %x\n", type, member);
return 0;
}
return SMU73_MAX_LEVELS_MVDD;
}
- printk(KERN_WARNING "can't get the mac of %x\n", value);
+ pr_warning("can't get the mac of %x\n", value);
return 0;
}
result = 0;
break;
default:
- printk(KERN_ERR "Table Exit with Invalid Command!");
+ pr_err("Table Exit with Invalid Command!");
priv->avfs.AvfsBtcStatus = AVFS_BTC_VIRUS_FAIL;
result = -1;
break;
priv->avfs.AvfsBtcStatus = AVFS_BTC_COMPLETED_UNSAVED;
result = 0;
} else {
- printk(KERN_ERR "[AVFS][fiji_start_avfs_btc] Attempt"
+ pr_err("[AVFS][fiji_start_avfs_btc] Attempt"
" to Enable AVFS Failed!");
smum_send_msg_to_smc(smumgr, PPSMC_MSG_DisableAvfs);
result = -1;
}
} else {
- printk(KERN_ERR "[AVFS][fiji_start_avfs_btc] "
+ pr_err("[AVFS][fiji_start_avfs_btc] "
"PerformBTC SMU msg failed");
result = -1;
}
case AVFS_BTC_NOTSUPPORTED: /* Do nothing */
break;
default:
- printk(KERN_ERR "[AVFS] Something is broken. See log!");
+ pr_err("[AVFS] Something is broken. See log!");
break;
}
return 0;
if (0 != result) {
smu_data->smc_state_table.GraphicsBootLevel = 0;
- printk(KERN_ERR "[ powerplay ] VBIOS did not find boot engine clock value \
+ pr_err("VBIOS did not find boot engine clock value \
in dependency table. Using Graphics DPM level 0!");
result = 0;
}
if (0 != result) {
smu_data->smc_state_table.MemoryBootLevel = 0;
- printk(KERN_ERR "[ powerplay ] VBIOS did not find boot engine clock value \
+ pr_err("VBIOS did not find boot engine clock value \
in dependency table. Using Memory DPM level 0!");
result = 0;
}
return offsetof(SMU71_Discrete_DpmTable, LowSclkInterruptThreshold);
}
}
- printk(KERN_WARNING "can't get the offset of type %x member %x\n", type, member);
+ pr_warning("can't get the offset of type %x member %x\n", type, member);
return 0;
}
return SMU71_MAX_LEVELS_MVDD;
}
- printk(KERN_WARNING "can't get the mac of %x\n", value);
+ pr_warning("can't get the mac of %x\n", value);
return 0;
}
return result;
if (!smu7_is_smc_ram_running(smumgr)) {
- printk("smu not running, upload firmware again \n");
+ pr_info("smu not running, upload firmware again \n");
result = iceland_smu_upload_firmware_image(smumgr);
if (result)
return result;
return offsetof(SMU74_Discrete_DpmTable, LowSclkInterruptThreshold);
}
}
- printk(KERN_WARNING "can't get the offset of type %x member %x\n", type, member);
+ pr_warning("can't get the offset of type %x member %x\n", type, member);
return 0;
}
return SMU7_UVD_MCLK_HANDSHAKE_DISABLE;
}
- printk(KERN_WARNING "can't get the mac of %x\n", value);
+ pr_warning("can't get the mac of %x\n", value);
return 0;
}
break;
default:
- printk("Table Exit with Invalid Command!");
+ pr_info("Table Exit with Invalid Command!");
smu_data->avfs.avfs_btc_status = AVFS_BTC_VIRUS_FAIL;
result = -1;
break;
if (0 != smu_data->avfs.avfs_btc_param) {
if (0 != smu7_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_PerformBtc, smu_data->avfs.avfs_btc_param)) {
- printk("[AVFS][SmuPolaris10_PerformBtc] PerformBTC SMU msg failed");
+ pr_info("[AVFS][SmuPolaris10_PerformBtc] PerformBTC SMU msg failed");
result = -1;
}
}
return -1);
if (smu_data->avfs.avfs_btc_param > 1) {
- printk("[AVFS][Polaris10_AVFSEventMgr] AC BTC has not been successfully verified on Fiji. There may be in this setting.");
+ pr_info("[AVFS][Polaris10_AVFSEventMgr] AC BTC has not been successfully verified on Fiji. There may be in this setting.");
smu_data->avfs.avfs_btc_status = AVFS_BTC_VIRUS_FAIL;
PP_ASSERT_WITH_CODE(-1 == polaris10_setup_pwr_virus(smumgr),
"[AVFS][Polaris10_AVFSEventMgr] Could not setup Pwr Virus for AVFS ",
break;
default:
- printk("[AVFS] Something is broken. See log!");
+ pr_info("[AVFS] Something is broken. See log!");
break;
}
ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP);
if (ret != 1)
- printk("\n failed to send pre message %x ret is %d \n", msg, ret);
+ pr_info("\n failed to send pre message %x ret is %d \n", msg, ret);
cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, msg);
ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP);
if (ret != 1)
- printk("\n failed to send message %x ret is %d \n", msg, ret);
+ pr_info("\n failed to send message %x ret is %d \n", msg, ret);
return 0;
}
SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0);
if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP))
- printk("Failed to send Message.\n");
+ pr_info("Failed to send Message.\n");
return 0;
}
result = UCODE_ID_RLC_G_MASK;
break;
default:
- printk("UCode type is out of range! \n");
+ pr_info("UCode type is out of range! \n");
result = 0;
}
struct SMU_DRAMData_TOC *toc;
if (!smumgr->reload_fw) {
- printk(KERN_INFO "[ powerplay ] skip reloading...\n");
+ pr_info("skip reloading...\n");
return 0;
}
smu7_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_DRV_DRAM_ADDR_LO, smu_data->header_buffer.mc_addr_low);
if (smu7_send_msg_to_smc_with_parameter(smumgr, PPSMC_MSG_LoadUcodes, fw_to_load))
- printk(KERN_ERR "Fail to Request SMU Load uCode");
+ pr_err("Fail to Request SMU Load uCode");
return result;
}
}
} else {
if (0 == data->dpm_level_enable_mask.pcie_dpm_enable_mask)
- printk(KERN_ERR "[ powerplay ] Pcie Dpm Enablemask is 0 !");
+ pr_err("Pcie Dpm Enablemask is 0 !");
while (data->dpm_level_enable_mask.pcie_dpm_enable_mask &&
((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
if (result != 0) {
smu_data->smc_state_table.GraphicsBootLevel = 0;
- printk(KERN_ERR "[powerplay] VBIOS did not find boot engine "
+ pr_err("[powerplay] VBIOS did not find boot engine "
"clock value in dependency table. "
"Using Graphics DPM level 0 !");
result = 0;
if (result != 0) {
smu_data->smc_state_table.MemoryBootLevel = 0;
- printk(KERN_ERR "[powerplay] VBIOS did not find boot "
+ pr_err("[powerplay] VBIOS did not find boot "
"engine clock value in dependency table."
"Using Memory DPM level 0 !");
result = 0;
config = VR_SVI2_PLANE_2;
table->VRConfig |= config;
} else {
- printk(KERN_ERR "[ powerplay ] VDDC and VDDGFX should "
+ pr_err("VDDC and VDDGFX should "
"be both on SVI2 control in splitted mode !\n");
}
} else {
config = VR_SVI2_PLANE_1;
table->VRConfig |= config;
} else {
- printk(KERN_ERR "[ powerplay ] VDDC should be on "
+ pr_err("VDDC should be on "
"SVI2 control in merged mode !\n");
}
}
return offsetof(SMU72_Discrete_DpmTable, LowSclkInterruptThreshold);
}
}
- printk(KERN_WARNING "can't get the offset of type %x member %x\n", type, member);
+ pr_warning("can't get the offset of type %x member %x\n", type, member);
return 0;
}
case SMU_MAX_LEVELS_MVDD:
return SMU72_MAX_LEVELS_MVDD;
}
- printk(KERN_WARNING "can't get the mac value %x\n", value);
+ pr_warning("can't get the mac value %x\n", value);
return 0;
}
/* Check pass/failed indicator */
if (1 != SMUM_READ_VFPF_INDIRECT_FIELD(smumgr->device,
CGS_IND_REG__SMC, SMU_STATUS, SMU_PASS)) {
- printk(KERN_ERR "[ powerplay ] SMU Firmware start failed\n");
+ pr_err("SMU Firmware start failed\n");
return -EINVAL;
}