ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset

We no longer need to model the RESET line as a regulator since
the USB phy-nop driver accepts "reset-gpios" property.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 2e29e811dd428d640a2b502e8ed23f8e328559b6..12378224e46f1b3a16ab5b72df5a9745ab163469 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -44,17 +44,6 @@
                };
        };
 
-       /* HS USB Port 2 RESET */
-       hsusb2_reset: hsusb2_reset_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "hsusb2_reset";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio5 19 0>;   /* gpio_147 */
-               startup-delay-us = <70000>;
-               enable-active-high;
-       };
-
        /* HS USB Port 2 Power */
        hsusb2_power: hsusb2_power_reg {
                compatible = "regulator-fixed";
@@ -68,7 +57,7 @@
        /* HS USB Host PHY on PORT 2 */
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
-               reset-supply = <&hsusb2_reset>;
+               reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;      /* gpio_147 */
                vcc-supply = <&hsusb2_power>;
        };