The 'struct sh_eth_cpu_data' field indicating the "intelligent checksum"
support was misnamed 'hw_crc' -- rename it to 'hw_checksum'.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
.rpadir_value = 2 << 16,
.no_trimd = 1,
.no_ade = 1,
- .hw_crc = 1,
+ .hw_checksum = 1,
.tsu = 1,
};
.rpadir_value = 2 << 16,
.no_trimd = 1,
.no_ade = 1,
- .hw_crc = 1,
+ .hw_checksum = 1,
.tsu = 1,
.select_mii = 1,
};
.no_trimd = 1,
.no_ade = 1,
.tsu = 1,
- .hw_crc = 1,
+ .hw_checksum = 1,
.select_mii = 1,
};
sh_eth_write(ndev, 0x0, RDFFR);
/* Reset HW CRC register */
- if (mdp->cd->hw_crc)
+ if (mdp->cd->hw_checksum)
sh_eth_write(ndev, 0x0, CSMR);
/* Select MII mode */
* the RFS bits are from bit 25 to bit 16. So, the
* driver needs right shifting by 16.
*/
- if (mdp->cd->hw_crc)
+ if (mdp->cd->hw_checksum)
desc_status >>= 16;
skb = mdp->rx_skbuff[entry];
add_reg(MAFCR);
if (cd->rtrate)
add_reg(RTRATE);
- if (cd->hw_crc)
+ if (cd->hw_checksum)
add_reg(CSMR);
if (cd->select_mii)
add_reg(RMII_MII);
unsigned rpadir:1; /* E-DMAC have RPADIR */
unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */
unsigned no_ade:1; /* E-DMAC DO NOT have ADE bit in EESR */
- unsigned hw_crc:1; /* E-DMAC have CSMR */
+ unsigned hw_checksum:1; /* E-DMAC has CSMR */
unsigned select_mii:1; /* EtherC have RMII_MII (MII select register) */
unsigned rmiimode:1; /* EtherC has RMIIMODE register */
unsigned rtrate:1; /* EtherC has RTRATE register */