hwmon: (k8temp) Remove superfluous CPU family check
authorAndreas Herrmann <andreas.herrmann3@amd.com>
Thu, 28 Oct 2010 18:31:42 +0000 (20:31 +0200)
committerJean Delvare <khali@endymion.delvare>
Thu, 28 Oct 2010 18:31:42 +0000 (20:31 +0200)
The family check in k8temp is not required because the driver is
already bound to a northbridge device only used with K8 CPUs.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/hwmon/k8temp.c

index 39ead2a4d3c50bfa34acb37651739920c22c76ee..418496f13020ba58f57e23eece28417a48466aea 100644 (file)
@@ -191,38 +191,31 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
        model = boot_cpu_data.x86_model;
        stepping = boot_cpu_data.x86_mask;
 
-       switch (boot_cpu_data.x86) {
-       case 0xf:
-               /* feature available since SH-C0, exclude older revisions */
-               if (((model == 4) && (stepping == 0)) ||
-                   ((model == 5) && (stepping <= 1))) {
-                       err = -ENODEV;
-                       goto exit_free;
-               }
-
-               /*
-                * AMD NPT family 0fh, i.e. RevF and RevG:
-                * meaning of SEL_CORE bit is inverted
-                */
-               if (model >= 0x40) {
-                       data->swap_core_select = 1;
-                       dev_warn(&pdev->dev, "Temperature readouts might be "
-                                "wrong - check erratum #141\n");
-               }
-
-               if (is_rev_g_desktop(model)) {
-                       /*
-                        * RevG desktop CPUs (i.e. no socket S1G1 or
-                        * ASB1 parts) need additional offset,
-                        * otherwise reported temperature is below
-                        * ambient temperature
-                        */
-                       data->temp_offset = 21000;
-               }
+       /* feature available since SH-C0, exclude older revisions */
+       if (((model == 4) && (stepping == 0)) ||
+           ((model == 5) && (stepping <= 1))) {
+               err = -ENODEV;
+               goto exit_free;
+       }
 
-               break;
+       /*
+        * AMD NPT family 0fh, i.e. RevF and RevG:
+        * meaning of SEL_CORE bit is inverted
+        */
+       if (model >= 0x40) {
+               data->swap_core_select = 1;
+               dev_warn(&pdev->dev, "Temperature readouts might be wrong - "
+                        "check erratum #141\n");
        }
 
+       /*
+        * RevG desktop CPUs (i.e. no socket S1G1 or ASB1 parts) need
+        * additional offset, otherwise reported temperature is below
+        * ambient temperature
+        */
+       if (is_rev_g_desktop(model))
+               data->temp_offset = 21000;
+
        pci_read_config_byte(pdev, REG_TEMP, &scfg);
        scfg &= ~(SEL_PLACE | SEL_CORE);                /* Select sensor 0, core0 */
        pci_write_config_byte(pdev, REG_TEMP, scfg);