phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC
authorReinder de Haan <patchesrdh@mveas.com>
Fri, 11 Dec 2015 15:32:18 +0000 (16:32 +0100)
committerKishon Vijay Abraham I <kishon@ti.com>
Sun, 20 Dec 2015 09:51:38 +0000 (15:21 +0530)
Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
not yet (fully) supported after this commit.

Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
drivers/phy/phy-sun4i-usb.c

index 0cebf745451760d103097ee73e5160b285610d81..95736d77fbb7168f045f031f8bba7f63980ad14d 100644 (file)
@@ -9,6 +9,7 @@ Required properties:
   * allwinner,sun7i-a20-usb-phy
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
+  * allwinner,sun8i-h3-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
   * "phy_ctrl"
index 35b1fa3b71fec85ebbb641230f880319b79afa43..bae54f7a1f4877b88297858783b0b864783ec1fe 100644 (file)
@@ -47,6 +47,9 @@
 #define REG_PHYBIST                    0x08
 #define REG_PHYTUNE                    0x0c
 #define REG_PHYCTL_A33                 0x10
+#define REG_PHY_UNK_H3                 0x20
+
+#define REG_PMU_UNK_H3                 0x10
 
 #define PHYCTL_DATA                    BIT(7)
 
@@ -80,7 +83,7 @@
 #define PHY_DISCON_TH_SEL              0x2a
 #define PHY_SQUELCH_DETECT             0x3c
 
-#define MAX_PHYS                       3
+#define MAX_PHYS                       4
 
 /*
  * Note do not raise the debounce time, we must report Vusb high within 100ms
@@ -92,6 +95,7 @@
 enum sun4i_usb_phy_type {
        sun4i_a10_phy,
        sun8i_a33_phy,
+       sun8i_h3_phy,
 };
 
 struct sun4i_usb_phy_cfg {
@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
        int ret;
+       u32 val;
 
        ret = clk_prepare_enable(phy->clk);
        if (ret)
@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
                return ret;
        }
 
-       /* Enable USB 45 Ohm resistor calibration */
-       if (phy->index == 0)
-               sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+       if (data->cfg->type == sun8i_h3_phy) {
+               if (phy->index == 0) {
+                       val = readl(data->base + REG_PHY_UNK_H3);
+                       writel(val & ~1, data->base + REG_PHY_UNK_H3);
+               }
+
+               val = readl(phy->pmu + REG_PMU_UNK_H3);
+               writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
+       } else {
+               /* Enable USB 45 Ohm resistor calibration */
+               if (phy->index == 0)
+                       sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
 
-       /* Adjust PHY's magnitude and rate */
-       sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+               /* Adjust PHY's magnitude and rate */
+               sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
 
-       /* Disconnect threshold adjustment */
-       sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
-                           data->cfg->disc_thresh, 2);
+               /* Disconnect threshold adjustment */
+               sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+                                   data->cfg->disc_thresh, 2);
+       }
 
        sun4i_usb_phy_passby(phy, 1);
 
@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
        .dedicated_clocks = true,
 };
 
+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
+       .num_phys = 4,
+       .type = sun8i_h3_phy,
+       .disc_thresh = 3,
+       .dedicated_clocks = true,
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
        { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
        { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
        { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
        { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+       { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
        { },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);