net: phy: at803x: add suspend/resume callbacks

When WOL is enabled, the chip can't be put into power-down (BMCR_PDOWN)
mode, as that will also switch off the MAC, which consequently leads to
a link loss.

Use BMCR_ISOLATE in that case, which will at least save us some
milliamperes in comparison to normal operation mode.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 417922810c791ce66ecde3dc481e198aa27b52d1..bc71947b1ec329f2eacd52b915b37ce56a4f16bb 100644 (file)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -100,6 +100,45 @@ static void at803x_get_wol(struct phy_device *phydev,
                wol->wolopts |= WAKE_MAGIC;
 }
 
+static int at803x_suspend(struct phy_device *phydev)
+{
+       int value;
+       int wol_enabled;
+
+       mutex_lock(&phydev->lock);
+
+       value = phy_read(phydev, AT803X_INTR_ENABLE);
+       wol_enabled = value & AT803X_WOL_ENABLE;
+
+       value = phy_read(phydev, MII_BMCR);
+
+       if (wol_enabled)
+               value |= BMCR_ISOLATE;
+       else
+               value |= BMCR_PDOWN;
+
+       phy_write(phydev, MII_BMCR, value);
+
+       mutex_unlock(&phydev->lock);
+
+       return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+       int value;
+
+       mutex_lock(&phydev->lock);
+
+       value = phy_read(phydev, MII_BMCR);
+       value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
+       phy_write(phydev, MII_BMCR, value);
+
+       mutex_unlock(&phydev->lock);
+
+       return 0;
+}
+
 static int at803x_config_init(struct phy_device *phydev)
 {
        int val;
@@ -161,6 +200,8 @@ static struct phy_driver at803x_driver[] = {
        .config_init    = at803x_config_init,
        .set_wol        = at803x_set_wol,
        .get_wol        = at803x_get_wol,
+       .suspend        = at803x_suspend,
+       .resume         = at803x_resume,
        .features       = PHY_GBIT_FEATURES,
        .flags          = PHY_HAS_INTERRUPT,
        .config_aneg    = genphy_config_aneg,
@@ -176,6 +217,8 @@ static struct phy_driver at803x_driver[] = {
        .config_init    = at803x_config_init,
        .set_wol        = at803x_set_wol,
        .get_wol        = at803x_get_wol,
+       .suspend        = at803x_suspend,
+       .resume         = at803x_resume,
        .features       = PHY_GBIT_FEATURES,
        .flags          = PHY_HAS_INTERRUPT,
        .config_aneg    = genphy_config_aneg,
@@ -191,6 +234,8 @@ static struct phy_driver at803x_driver[] = {
        .config_init    = at803x_config_init,
        .set_wol        = at803x_set_wol,
        .get_wol        = at803x_get_wol,
+       .suspend        = at803x_suspend,
+       .resume         = at803x_resume,
        .features       = PHY_GBIT_FEATURES,
        .flags          = PHY_HAS_INTERRUPT,
        .config_aneg    = genphy_config_aneg,