--- /dev/null
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ *
+ * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the
+ * skeleton provided by the nuvoton-cir driver.
+ *
+ * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues
+ * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus
+ * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards
+ * <jimbo-lirc@edwardsclan.net>.
+ *
+ * The lirc_ite8709 driver was written by Grégory Lardière
+ * <spmf2004-lirc@yahoo.fr> in 2008.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/bitops.h>
+#include <media/rc-core.h>
+#include <linux/pci_ids.h>
+
+#include "ite-cir.h"
+
+/* module parameters */
+
+/* debug level */
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+/* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
+static int rx_low_carrier_freq;
+module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, "
+ "0 for no RX demodulation");
+
+/* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
+static int rx_high_carrier_freq;
+module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, "
+ "Hz, 0 for no RX demodulation");
+
+/* override tx carrier frequency */
+static int tx_carrier_freq;
+module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz");
+
+/* override tx duty cycle */
+static int tx_duty_cycle;
+module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100");
+
+/* override default sample period */
+static long sample_period;
+module_param(sample_period, long, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_period, "Override carrier sample period, us");
+
+/* override detected model id */
+static int model_number = -1;
+module_param(model_number, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect");
+
+
+/* HW-independent code functions */
+
+/* check whether carrier frequency is high frequency */
+static inline bool ite_is_high_carrier_freq(unsigned int freq)
+{
+ return freq >= ITE_HCF_MIN_CARRIER_FREQ;
+}
+
+/* get the bits required to program the carrier frequency in CFQ bits,
+ * unshifted */
+static u8 ite_get_carrier_freq_bits(unsigned int freq)
+{
+ if (ite_is_high_carrier_freq(freq)) {
+ if (freq < 425000)
+ return ITE_CFQ_400;
+
+ else if (freq < 465000)
+ return ITE_CFQ_450;
+
+ else if (freq < 490000)
+ return ITE_CFQ_480;
+
+ else
+ return ITE_CFQ_500;
+ } else {
+ /* trim to limits */
+ if (freq < ITE_LCF_MIN_CARRIER_FREQ)
+ freq = ITE_LCF_MIN_CARRIER_FREQ;
+ if (freq > ITE_LCF_MAX_CARRIER_FREQ)
+ freq = ITE_LCF_MAX_CARRIER_FREQ;
+
+ /* convert to kHz and subtract the base freq */
+ freq =
+ DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ,
+ 1000);
+
+ return (u8) freq;
+ }
+}
+
+/* get the bits required to program the pulse with in TXMPW */
+static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle)
+{
+ unsigned long period_ns, on_ns;
+
+ /* sanitize freq into range */
+ if (freq < ITE_LCF_MIN_CARRIER_FREQ)
+ freq = ITE_LCF_MIN_CARRIER_FREQ;
+ if (freq > ITE_HCF_MAX_CARRIER_FREQ)
+ freq = ITE_HCF_MAX_CARRIER_FREQ;
+
+ period_ns = 1000000000UL / freq;
+ on_ns = period_ns * duty_cycle / 100;
+
+ if (ite_is_high_carrier_freq(freq)) {
+ if (on_ns < 750)
+ return ITE_TXMPW_A;
+
+ else if (on_ns < 850)
+ return ITE_TXMPW_B;
+
+ else if (on_ns < 950)
+ return ITE_TXMPW_C;
+
+ else if (on_ns < 1080)
+ return ITE_TXMPW_D;
+
+ else
+ return ITE_TXMPW_E;
+ } else {
+ if (on_ns < 6500)
+ return ITE_TXMPW_A;
+
+ else if (on_ns < 7850)
+ return ITE_TXMPW_B;
+
+ else if (on_ns < 9650)
+ return ITE_TXMPW_C;
+
+ else if (on_ns < 11950)
+ return ITE_TXMPW_D;
+
+ else
+ return ITE_TXMPW_E;
+ }
+}
+
+/* decode raw bytes as received by the hardware, and push them to the ir-core
+ * layer */
+static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
+ length)
+{
+ u32 sample_period;
+ unsigned long *ldata;
+ unsigned int next_one, next_zero, size;
+ DEFINE_IR_RAW_EVENT(ev);
+
+ if (length == 0)
+ return;
+
+ sample_period = dev->params.sample_period;
+ ldata = (unsigned long *)data;
+ size = length << 3;
+ next_one = generic_find_next_le_bit(ldata, size, 0);
+ if (next_one > 0) {
+ ev.pulse = true;
+ ev.duration =
+ ITE_BITS_TO_NS(next_one, sample_period);
+ ir_raw_event_store_with_filter(dev->rdev, &ev);
+ }
+
+ while (next_one < size) {
+ next_zero = generic_find_next_zero_le_bit(ldata, size, next_one + 1);
+ ev.pulse = false;
+ ev.duration = ITE_BITS_TO_NS(next_zero - next_one, sample_period);
+ ir_raw_event_store_with_filter(dev->rdev, &ev);
+
+ if (next_zero < size) {
+ next_one =
+ generic_find_next_le_bit(ldata,
+ size,
+ next_zero + 1);
+ ev.pulse = true;
+ ev.duration =
+ ITE_BITS_TO_NS(next_one - next_zero,
+ sample_period);
+ ir_raw_event_store_with_filter
+ (dev->rdev, &ev);
+ } else
+ next_one = size;
+ }
+
+ ir_raw_event_handle(dev->rdev);
+
+ ite_dbg_verbose("decoded %d bytes.", length);
+}
+
+/* set all the rx/tx carrier parameters; this must be called with the device
+ * spinlock held */
+static void ite_set_carrier_params(struct ite_dev *dev)
+{
+ unsigned int freq, low_freq, high_freq;
+ int allowance;
+ bool use_demodulator;
+ bool for_tx = dev->transmitting;
+
+ ite_dbg("%s called", __func__);
+
+ if (for_tx) {
+ /* we don't need no stinking calculations */
+ freq = dev->params.tx_carrier_freq;
+ allowance = ITE_RXDCR_DEFAULT;
+ use_demodulator = false;
+ } else {
+ low_freq = dev->params.rx_low_carrier_freq;
+ high_freq = dev->params.rx_high_carrier_freq;
+
+ if (low_freq == 0) {
+ /* don't demodulate */
+ freq =
+ ITE_DEFAULT_CARRIER_FREQ;
+ allowance = ITE_RXDCR_DEFAULT;
+ use_demodulator = false;
+ } else {
+ /* calculate the middle freq */
+ freq = (low_freq + high_freq) / 2;
+
+ /* calculate the allowance */
+ allowance =
+ DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq),
+ ITE_RXDCR_PER_10000_STEP
+ * (high_freq + low_freq));
+
+ if (allowance < 1)
+ allowance = 1;
+
+ if (allowance > ITE_RXDCR_MAX)
+ allowance = ITE_RXDCR_MAX;
+ }
+ }
+
+ /* set the carrier parameters in a device-dependent way */
+ dev->params.set_carrier_params(dev, ite_is_high_carrier_freq(freq),
+ use_demodulator, ite_get_carrier_freq_bits(freq), allowance,
+ ite_get_pulse_width_bits(freq, dev->params.tx_duty_cycle));
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t ite_cir_isr(int irq, void *data)
+{
+ struct ite_dev *dev = data;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_RETVAL(IRQ_NONE);
+ u8 rx_buf[ITE_RX_FIFO_LEN];
+ int rx_bytes;
+ int iflags;
+
+ ite_dbg_verbose("%s firing", __func__);
+
+ /* grab the spinlock */
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* read the interrupt flags */
+ iflags = dev->params.get_irq_causes(dev);
+
+ /* check for the receive interrupt */
+ if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
+ /* read the FIFO bytes */
+ rx_bytes =
+ dev->params.get_rx_bytes(dev, rx_buf,
+ ITE_RX_FIFO_LEN);
+
+ if (rx_bytes > 0) {
+ /* drop the spinlock, since the ir-core layer
+ * may call us back again through
+ * ite_s_idle() */
+ spin_unlock_irqrestore(&dev->
+ lock,
+ flags);
+
+ /* decode the data we've just received */
+ ite_decode_bytes(dev, rx_buf,
+ rx_bytes);
+
+ /* reacquire the spinlock */
+ spin_lock_irqsave(&dev->lock,
+ flags);
+
+ /* mark the interrupt as serviced */
+ ret = IRQ_RETVAL(IRQ_HANDLED);
+ }
+ } else if (iflags & ITE_IRQ_TX_FIFO) {
+ /* FIFO space available interrupt */
+ ite_dbg_verbose("got interrupt for TX FIFO");
+
+ /* wake any sleeping transmitter */
+ wake_up_interruptible(&dev->tx_queue);
+
+ /* mark the interrupt as serviced */
+ ret = IRQ_RETVAL(IRQ_HANDLED);
+ }
+
+ /* drop the spinlock */
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ ite_dbg_verbose("%s done returning %d", __func__, (int)ret);
+
+ return ret;
+}
+
+/* set the rx carrier freq range, guess it's in Hz... */
+static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32
+ carrier_high)
+{
+ unsigned long flags;
+ struct ite_dev *dev = rcdev->priv;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->params.rx_low_carrier_freq = carrier_low;
+ dev->params.rx_high_carrier_freq = carrier_high;
+ ite_set_carrier_params(dev);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/* set the tx carrier freq, guess it's in Hz... */
+static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
+{
+ unsigned long flags;
+ struct ite_dev *dev = rcdev->priv;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->params.tx_carrier_freq = carrier;
+ ite_set_carrier_params(dev);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/* set the tx duty cycle by controlling the pulse width */
+static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
+{
+ unsigned long flags;
+ struct ite_dev *dev = rcdev->priv;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->params.tx_duty_cycle = duty_cycle;
+ ite_set_carrier_params(dev);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/* transmit out IR pulses; what you get here is a batch of alternating
+ * pulse/space/pulse/space lengths that we should write out completely through
+ * the FIFO, blocking on a full FIFO */
+static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
+{
+ unsigned long flags;
+ struct ite_dev *dev = rcdev->priv;
+ bool is_pulse = false;
+ int remaining_us, fifo_avail, fifo_remaining, last_idx = 0;
+ int max_rle_us, next_rle_us;
+ int ret = n;
+ u8 last_sent[ITE_TX_FIFO_LEN];
+ u8 val;
+
+ ite_dbg("%s called", __func__);
+
+ /* clear the array just in case */
+ memset(last_sent, 0, ARRAY_SIZE(last_sent));
+
+ /* n comes in bytes; convert to ints */
+ n /= sizeof(int);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* let everybody know we're now transmitting */
+ dev->transmitting = true;
+
+ /* and set the carrier values for transmission */
+ ite_set_carrier_params(dev);
+
+ /* calculate how much time we can send in one byte */
+ max_rle_us =
+ (ITE_BAUDRATE_DIVISOR * dev->params.sample_period *
+ ITE_TX_MAX_RLE) / 1000;
+
+ /* disable the receiver */
+ dev->params.disable_rx(dev);
+
+ /* this is where we'll begin filling in the FIFO, until it's full.
+ * then we'll just activate the interrupt, wait for it to wake us up
+ * again, disable it, continue filling the FIFO... until everything
+ * has been pushed out */
+ fifo_avail =
+ ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
+
+ while (n > 0 && dev->in_use) {
+ /* transmit the next sample */
+ is_pulse = !is_pulse;
+ remaining_us = *(txbuf++);
+ n--;
+
+ ite_dbg("%s: %ld",
+ ((is_pulse) ? "pulse" : "space"),
+ (long int)
+ remaining_us);
+
+ /* repeat while the pulse is non-zero length */
+ while (remaining_us > 0 && dev->in_use) {
+ if (remaining_us > max_rle_us)
+ next_rle_us = max_rle_us;
+
+ else
+ next_rle_us = remaining_us;
+
+ remaining_us -= next_rle_us;
+
+ /* check what's the length we have to pump out */
+ val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us;
+
+ /* put it into the sent buffer */
+ last_sent[last_idx++] = val;
+ last_idx &= (ITE_TX_FIFO_LEN);
+
+ /* encode it for 7 bits */
+ val = (val - 1) & ITE_TX_RLE_MASK;
+
+ /* take into account pulse/space prefix */
+ if (is_pulse)
+ val |= ITE_TX_PULSE;
+
+ else
+ val |= ITE_TX_SPACE;
+
+ /* if we get to 0 available, read again, just in case
+ * some other slot got freed */
+ if (fifo_avail <= 0)
+ fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
+
+ /* if it's still full */
+ if (fifo_avail <= 0) {
+ /* enable the tx interrupt */
+ dev->params.
+ enable_tx_interrupt(dev);
+
+ /* drop the spinlock */
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* wait for the FIFO to empty enough */
+ wait_event_interruptible(dev->tx_queue, (fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev)) >= 8);
+
+ /* get the spinlock again */
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable the tx interrupt again. */
+ dev->params.
+ disable_tx_interrupt(dev);
+ }
+
+ /* now send the byte through the FIFO */
+ dev->params.put_tx_byte(dev, val);
+ fifo_avail--;
+ }
+ }
+
+ /* wait and don't return until the whole FIFO has been sent out;
+ * otherwise we could configure the RX carrier params instead of the
+ * TX ones while the transmission is still being performed! */
+ fifo_remaining = dev->params.get_tx_used_slots(dev);
+ remaining_us = 0;
+ while (fifo_remaining > 0) {
+ fifo_remaining--;
+ last_idx--;
+ last_idx &= (ITE_TX_FIFO_LEN - 1);
+ remaining_us += last_sent[last_idx];
+ }
+ remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE);
+
+ /* drop the spinlock while we sleep */
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* sleep remaining_us microseconds */
+ mdelay(DIV_ROUND_UP(remaining_us, 1000));
+
+ /* reacquire the spinlock */
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* now we're not transmitting anymore */
+ dev->transmitting = false;
+
+ /* and set the carrier values for reception */
+ ite_set_carrier_params(dev);
+
+ /* reenable the receiver */
+ if (dev->in_use)
+ dev->params.enable_rx(dev);
+
+ /* notify transmission end */
+ wake_up_interruptible(&dev->tx_ended);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return ret;
+}
+
+/* idle the receiver if needed */
+static void ite_s_idle(struct rc_dev *rcdev, bool enable)
+{
+ unsigned long flags;
+ struct ite_dev *dev = rcdev->priv;
+
+ ite_dbg("%s called", __func__);
+
+ if (enable) {
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->params.idle_rx(dev);
+ spin_unlock_irqrestore(&dev->lock, flags);
+ }
+}
+
+
+/* IT8712F HW-specific functions */
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it87_get_irq_causes(struct ite_dev *dev)
+{
+ u8 iflags;
+ int ret = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read the interrupt flags */
+ iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II;
+
+ switch (iflags) {
+ case IT87_II_RXDS:
+ ret = ITE_IRQ_RX_FIFO;
+ break;
+ case IT87_II_RXFO:
+ ret = ITE_IRQ_RX_FIFO_OVERRUN;
+ break;
+ case IT87_II_TXLDL:
+ ret = ITE_IRQ_TX_FIFO;
+ break;
+ }
+
+ return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq,
+ bool use_demodulator,
+ u8 carrier_freq_bits, u8 allowance_bits,
+ u8 pulse_width_bits)
+{
+ u8 val;
+
+ ite_dbg("%s called", __func__);
+
+ /* program the RCR register */
+ val = inb(dev->cir_addr + IT87_RCR)
+ & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR);
+
+ if (high_freq)
+ val |= IT87_HCFS;
+
+ if (use_demodulator)
+ val |= IT87_RXEND;
+
+ val |= allowance_bits;
+
+ outb(val, dev->cir_addr + IT87_RCR);
+
+ /* program the TCR2 register */
+ outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits,
+ dev->cir_addr + IT87_TCR2);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+ int fifo, read = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read how many bytes are still in the FIFO */
+ fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC;
+
+ while (fifo > 0 && buf_size > 0) {
+ *(buf++) = inb(dev->cir_addr + IT87_DR);
+ fifo--;
+ read++;
+ buf_size--;
+ }
+
+ return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it87_get_tx_used_slots(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it87_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+ outb(value, dev->cir_addr + IT87_DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+ pulse is detected; this must be called with the device spinlock held */
+static void it87_idle_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable streaming by clearing RXACT writing it as 1 */
+ outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT,
+ dev->cir_addr + IT87_RCR);
+
+ /* clear the FIFO */
+ outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR,
+ dev->cir_addr + IT87_TCR1);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it87_disable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the receiver interrupts */
+ outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE),
+ dev->cir_addr + IT87_IER);
+
+ /* disable the receiver */
+ outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN,
+ dev->cir_addr + IT87_RCR);
+
+ /* clear the FIFO and RXACT (actually RXACT should have been cleared
+ * in the previous outb() call) */
+ it87_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it87_enable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the receiver by setting RXEN */
+ outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN,
+ dev->cir_addr + IT87_RCR);
+
+ /* just prepare it to idle for the next reception */
+ it87_idle_rx(dev);
+
+ /* enable the receiver interrupts and master enable flag */
+ outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC,
+ dev->cir_addr + IT87_IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it87_disable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the transmitter interrupts */
+ outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE,
+ dev->cir_addr + IT87_IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it87_enable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the transmitter interrupts and master enable flag */
+ outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC,
+ dev->cir_addr + IT87_IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it87_disable(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* clear out all interrupt enable flags */
+ outb(inb(dev->cir_addr + IT87_IER) &
+ ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE),
+ dev->cir_addr + IT87_IER);
+
+ /* disable the receiver */
+ it87_disable_rx(dev);
+
+ /* erase the FIFO */
+ outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1),
+ dev->cir_addr + IT87_TCR1);
+}
+
+/* initialize the hardware */
+static void it87_init_hardware(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable just the baud rate divisor register,
+ disabling all the interrupts at the same time */
+ outb((inb(dev->cir_addr + IT87_IER) &
+ ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR,
+ dev->cir_addr + IT87_IER);
+
+ /* write out the baud rate divisor */
+ outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR);
+ outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR);
+
+ /* disable the baud rate divisor register again */
+ outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR,
+ dev->cir_addr + IT87_IER);
+
+ /* program the RCR register defaults */
+ outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR);
+
+ /* program the TCR1 register */
+ outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE
+ | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR,
+ dev->cir_addr + IT87_TCR1);
+
+ /* program the carrier parameters */
+ ite_set_carrier_params(dev);
+}
+
+/* IT8512F on ITE8708 HW-specific functions */
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it8708_get_irq_causes(struct ite_dev *dev)
+{
+ u8 iflags;
+ int ret = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read the interrupt flags */
+ iflags = inb(dev->cir_addr + IT8708_C0IIR);
+
+ if (iflags & IT85_TLDLI)
+ ret |= ITE_IRQ_TX_FIFO;
+ if (iflags & IT85_RDAI)
+ ret |= ITE_IRQ_RX_FIFO;
+ if (iflags & IT85_RFOI)
+ ret |= ITE_IRQ_RX_FIFO_OVERRUN;
+
+ return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq,
+ bool use_demodulator,
+ u8 carrier_freq_bits, u8 allowance_bits,
+ u8 pulse_width_bits)
+{
+ u8 val;
+
+ ite_dbg("%s called", __func__);
+
+ /* program the C0CFR register, with HRAE=1 */
+ outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
+ dev->cir_addr + IT8708_BANKSEL);
+
+ val = (inb(dev->cir_addr + IT8708_C0CFR)
+ & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits;
+
+ if (high_freq)
+ val |= IT85_HCFS;
+
+ outb(val, dev->cir_addr + IT8708_C0CFR);
+
+ outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
+ dev->cir_addr + IT8708_BANKSEL);
+
+ /* program the C0RCR register */
+ val = inb(dev->cir_addr + IT8708_C0RCR)
+ & ~(IT85_RXEND | IT85_RXDCR);
+
+ if (use_demodulator)
+ val |= IT85_RXEND;
+
+ val |= allowance_bits;
+
+ outb(val, dev->cir_addr + IT8708_C0RCR);
+
+ /* program the C0TCR register */
+ val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW;
+ val |= pulse_width_bits;
+ outb(val, dev->cir_addr + IT8708_C0TCR);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+ int fifo, read = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read how many bytes are still in the FIFO */
+ fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC;
+
+ while (fifo > 0 && buf_size > 0) {
+ *(buf++) = inb(dev->cir_addr + IT8708_C0DR);
+ fifo--;
+ read++;
+ buf_size--;
+ }
+
+ return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it8708_get_tx_used_slots(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it8708_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+ outb(value, dev->cir_addr + IT8708_C0DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+ pulse is detected; this must be called with the device spinlock held */
+static void it8708_idle_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable streaming by clearing RXACT writing it as 1 */
+ outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT,
+ dev->cir_addr + IT8708_C0RCR);
+
+ /* clear the FIFO */
+ outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR,
+ dev->cir_addr + IT8708_C0MSTCR);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it8708_disable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the receiver interrupts */
+ outb(inb(dev->cir_addr + IT8708_C0IER) &
+ ~(IT85_RDAIE | IT85_RFOIE),
+ dev->cir_addr + IT8708_C0IER);
+
+ /* disable the receiver */
+ outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN,
+ dev->cir_addr + IT8708_C0RCR);
+
+ /* clear the FIFO and RXACT (actually RXACT should have been cleared
+ * in the previous outb() call) */
+ it8708_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it8708_enable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the receiver by setting RXEN */
+ outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN,
+ dev->cir_addr + IT8708_C0RCR);
+
+ /* just prepare it to idle for the next reception */
+ it8708_idle_rx(dev);
+
+ /* enable the receiver interrupts and master enable flag */
+ outb(inb(dev->cir_addr + IT8708_C0IER)
+ |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
+ dev->cir_addr + IT8708_C0IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8708_disable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the transmitter interrupts */
+ outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE,
+ dev->cir_addr + IT8708_C0IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8708_enable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the transmitter interrupts and master enable flag */
+ outb(inb(dev->cir_addr + IT8708_C0IER)
+ |IT85_TLDLIE | IT85_IEC,
+ dev->cir_addr + IT8708_C0IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it8708_disable(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* clear out all interrupt enable flags */
+ outb(inb(dev->cir_addr + IT8708_C0IER) &
+ ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
+ dev->cir_addr + IT8708_C0IER);
+
+ /* disable the receiver */
+ it8708_disable_rx(dev);
+
+ /* erase the FIFO */
+ outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR),
+ dev->cir_addr + IT8708_C0MSTCR);
+}
+
+/* initialize the hardware */
+static void it8708_init_hardware(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable all the interrupts */
+ outb(inb(dev->cir_addr + IT8708_C0IER) &
+ ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
+ dev->cir_addr + IT8708_C0IER);
+
+ /* program the baud rate divisor */
+ outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
+ dev->cir_addr + IT8708_BANKSEL);
+
+ outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR);
+ outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
+ dev->cir_addr + IT8708_C0BDHR);
+
+ outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
+ dev->cir_addr + IT8708_BANKSEL);
+
+ /* program the C0MSTCR register defaults */
+ outb((inb(dev->cir_addr + IT8708_C0MSTCR) &
+ ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL |
+ IT85_FIFOCLR | IT85_RESET)) |
+ IT85_FIFOTL_DEFAULT,
+ dev->cir_addr + IT8708_C0MSTCR);
+
+ /* program the C0RCR register defaults */
+ outb((inb(dev->cir_addr + IT8708_C0RCR) &
+ ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND |
+ IT85_RXACT | IT85_RXDCR)) |
+ ITE_RXDCR_DEFAULT,
+ dev->cir_addr + IT8708_C0RCR);
+
+ /* program the C0TCR register defaults */
+ outb((inb(dev->cir_addr + IT8708_C0TCR) &
+ ~(IT85_TXMPM | IT85_TXMPW))
+ |IT85_TXRLE | IT85_TXENDF |
+ IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT,
+ dev->cir_addr + IT8708_C0TCR);
+
+ /* program the carrier parameters */
+ ite_set_carrier_params(dev);
+}
+
+/* IT8512F on ITE8709 HW-specific functions */
+
+/* read a byte from the SRAM module */
+static inline u8 it8709_rm(struct ite_dev *dev, int index)
+{
+ outb(index, dev->cir_addr + IT8709_RAM_IDX);
+ return inb(dev->cir_addr + IT8709_RAM_VAL);
+}
+
+/* write a byte to the SRAM module */
+static inline void it8709_wm(struct ite_dev *dev, u8 val, int index)
+{
+ outb(index, dev->cir_addr + IT8709_RAM_IDX);
+ outb(val, dev->cir_addr + IT8709_RAM_VAL);
+}
+
+static void it8709_wait(struct ite_dev *dev)
+{
+ int i = 0;
+ /*
+ * loop until device tells it's ready to continue
+ * iterations count is usually ~750 but can sometimes achieve 13000
+ */
+ for (i = 0; i < 15000; i++) {
+ udelay(2);
+ if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE)
+ break;
+ }
+}
+
+/* read the value of a CIR register */
+static u8 it8709_rr(struct ite_dev *dev, int index)
+{
+ /* just wait in case the previous access was a write */
+ it8709_wait(dev);
+ it8709_wm(dev, index, IT8709_REG_IDX);
+ it8709_wm(dev, IT8709_READ, IT8709_MODE);
+
+ /* wait for the read data to be available */
+ it8709_wait(dev);
+
+ /* return the read value */
+ return it8709_rm(dev, IT8709_REG_VAL);
+}
+
+/* write the value of a CIR register */
+static void it8709_wr(struct ite_dev *dev, u8 val, int index)
+{
+ /* we wait before writing, and not afterwards, since this allows us to
+ * pipeline the host CPU with the microcontroller */
+ it8709_wait(dev);
+ it8709_wm(dev, val, IT8709_REG_VAL);
+ it8709_wm(dev, index, IT8709_REG_IDX);
+ it8709_wm(dev, IT8709_WRITE, IT8709_MODE);
+}
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it8709_get_irq_causes(struct ite_dev *dev)
+{
+ u8 iflags;
+ int ret = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read the interrupt flags */
+ iflags = it8709_rm(dev, IT8709_IIR);
+
+ if (iflags & IT85_TLDLI)
+ ret |= ITE_IRQ_TX_FIFO;
+ if (iflags & IT85_RDAI)
+ ret |= ITE_IRQ_RX_FIFO;
+ if (iflags & IT85_RFOI)
+ ret |= ITE_IRQ_RX_FIFO_OVERRUN;
+
+ return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq,
+ bool use_demodulator,
+ u8 carrier_freq_bits, u8 allowance_bits,
+ u8 pulse_width_bits)
+{
+ u8 val;
+
+ ite_dbg("%s called", __func__);
+
+ val = (it8709_rr(dev, IT85_C0CFR)
+ &~(IT85_HCFS | IT85_CFQ)) |
+ carrier_freq_bits;
+
+ if (high_freq)
+ val |= IT85_HCFS;
+
+ it8709_wr(dev, val, IT85_C0CFR);
+
+ /* program the C0RCR register */
+ val = it8709_rr(dev, IT85_C0RCR)
+ & ~(IT85_RXEND | IT85_RXDCR);
+
+ if (use_demodulator)
+ val |= IT85_RXEND;
+
+ val |= allowance_bits;
+
+ it8709_wr(dev, val, IT85_C0RCR);
+
+ /* program the C0TCR register */
+ val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW;
+ val |= pulse_width_bits;
+ it8709_wr(dev, val, IT85_C0TCR);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+ int fifo, read = 0;
+
+ ite_dbg("%s called", __func__);
+
+ /* read how many bytes are still in the FIFO */
+ fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC;
+
+ while (fifo > 0 && buf_size > 0) {
+ *(buf++) = it8709_rm(dev, IT8709_FIFO + read);
+ fifo--;
+ read++;
+ buf_size--;
+ }
+
+ /* 'clear' the FIFO by setting the writing index to 0; this is
+ * completely bound to be racy, but we can't help it, since it's a
+ * limitation of the protocol */
+ it8709_wm(dev, 0, IT8709_RFSR);
+
+ return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it8709_get_tx_used_slots(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it8709_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+ it8709_wr(dev, value, IT85_C0DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+ pulse is detected; this must be called with the device spinlock held */
+static void it8709_idle_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable streaming by clearing RXACT writing it as 1 */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT,
+ IT85_C0RCR);
+
+ /* clear the FIFO */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR,
+ IT85_C0MSTCR);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it8709_disable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the receiver interrupts */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
+ ~(IT85_RDAIE | IT85_RFOIE),
+ IT85_C0IER);
+
+ /* disable the receiver */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN,
+ IT85_C0RCR);
+
+ /* clear the FIFO and RXACT (actually RXACT should have been cleared
+ * in the previous it8709_wr(dev, ) call) */
+ it8709_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it8709_enable_rx(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the receiver by setting RXEN */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN,
+ IT85_C0RCR);
+
+ /* just prepare it to idle for the next reception */
+ it8709_idle_rx(dev);
+
+ /* enable the receiver interrupts and master enable flag */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
+ |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
+ IT85_C0IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8709_disable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable the transmitter interrupts */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE,
+ IT85_C0IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8709_enable_tx_interrupt(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* enable the transmitter interrupts and master enable flag */
+ it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
+ |IT85_TLDLIE | IT85_IEC,
+ IT85_C0IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it8709_disable(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* clear out all interrupt enable flags */
+ it8709_wr(dev,
+ it8709_rr(dev,
+ IT85_C0IER) & ~(IT85_IEC | IT85_RFOIE |
+ IT85_RDAIE |
+ IT85_TLDLIE), IT85_C0IER);
+
+ /* disable the receiver */
+ it8709_disable_rx(dev);
+
+ /* erase the FIFO */
+ it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR),
+ IT85_C0MSTCR);
+}
+
+/* initialize the hardware */
+static void it8709_init_hardware(struct ite_dev *dev)
+{
+ ite_dbg("%s called", __func__);
+
+ /* disable all the interrupts */
+ it8709_wr(dev,
+ it8709_rr(dev,
+ IT85_C0IER) & ~(IT85_IEC | IT85_RFOIE |
+ IT85_RDAIE |
+ IT85_TLDLIE), IT85_C0IER);
+
+ /* program the baud rate divisor */
+ it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR);
+ it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
+ IT85_C0BDHR);
+
+ /* program the C0MSTCR register defaults */
+ it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) & ~(IT85_ILSEL |
+ IT85_ILE
+ | IT85_FIFOTL
+ |
+ IT85_FIFOCLR
+ |
+ IT85_RESET))
+ | IT85_FIFOTL_DEFAULT, IT85_C0MSTCR);
+
+ /* program the C0RCR register defaults */
+ it8709_wr(dev,
+ (it8709_rr(dev, IT85_C0RCR) &
+ ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND
+ | IT85_RXACT | IT85_RXDCR)) |
+ ITE_RXDCR_DEFAULT, IT85_C0RCR);
+
+ /* program the C0TCR register defaults */
+ it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR)
+ &~(IT85_TXMPM | IT85_TXMPW))
+ |IT85_TXRLE | IT85_TXENDF |
+ IT85_TXMPM_DEFAULT |
+ IT85_TXMPW_DEFAULT, IT85_C0TCR);
+
+ /* program the carrier parameters */
+ ite_set_carrier_params(dev);
+}
+
+
+/* generic hardware setup/teardown code */
+
+/* activate the device for use */
+static int ite_open(struct rc_dev *rcdev)
+{
+ struct ite_dev *dev = rcdev->priv;
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->in_use = true;
+
+ /* enable the receiver */
+ dev->params.enable_rx(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/* deactivate the device for use */
+static void ite_close(struct rc_dev *rcdev)
+{
+ struct ite_dev *dev = rcdev->priv;
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->in_use = false;
+
+ /* wait for any transmission to end */
+ spin_unlock_irqrestore(&dev->lock, flags);
+ wait_event_interruptible(dev->tx_ended, !dev->transmitting);
+ spin_lock_irqsave(&dev->lock, flags);
+
+ dev->params.disable(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* supported models and their parameters */
+static const struct ite_dev_params ite_dev_descs[] = {
+ { /* 0: ITE8704 */
+ .model = "ITE8704 CIR transceiver",
+ .io_region_size = IT87_IOREG_LENGTH,
+ .hw_tx_capable = true,
+ .sample_period = (u32) (1000000000ULL / 115200),
+ .tx_carrier_freq = 38000,
+ .tx_duty_cycle = 33,
+ .rx_low_carrier_freq = 0,
+ .rx_high_carrier_freq = 0,
+
+ /* operations */
+ .get_irq_causes = it87_get_irq_causes,
+ .enable_rx = it87_enable_rx,
+ .idle_rx = it87_idle_rx,
+ .disable_rx = it87_idle_rx,
+ .get_rx_bytes = it87_get_rx_bytes,
+ .enable_tx_interrupt = it87_enable_tx_interrupt,
+ .disable_tx_interrupt = it87_disable_tx_interrupt,
+ .get_tx_used_slots = it87_get_tx_used_slots,
+ .put_tx_byte = it87_put_tx_byte,
+ .disable = it87_disable,
+ .init_hardware = it87_init_hardware,
+ .set_carrier_params = it87_set_carrier_params,
+ },
+ { /* 1: ITE8713 */
+ .model = "ITE8713 CIR transceiver",
+ .io_region_size = IT87_IOREG_LENGTH,
+ .hw_tx_capable = true,
+ .sample_period = (u32) (1000000000ULL / 115200),
+ .tx_carrier_freq = 38000,
+ .tx_duty_cycle = 33,
+ .rx_low_carrier_freq = 0,
+ .rx_high_carrier_freq = 0,
+
+ /* operations */
+ .get_irq_causes = it87_get_irq_causes,
+ .enable_rx = it87_enable_rx,
+ .idle_rx = it87_idle_rx,
+ .disable_rx = it87_idle_rx,
+ .get_rx_bytes = it87_get_rx_bytes,
+ .enable_tx_interrupt = it87_enable_tx_interrupt,
+ .disable_tx_interrupt = it87_disable_tx_interrupt,
+ .get_tx_used_slots = it87_get_tx_used_slots,
+ .put_tx_byte = it87_put_tx_byte,
+ .disable = it87_disable,
+ .init_hardware = it87_init_hardware,
+ .set_carrier_params = it87_set_carrier_params,
+ },
+ { /* 2: ITE8708 */
+ .model = "ITE8708 CIR transceiver",
+ .io_region_size = IT8708_IOREG_LENGTH,
+ .hw_tx_capable = true,
+ .sample_period = (u32) (1000000000ULL / 115200),
+ .tx_carrier_freq = 38000,
+ .tx_duty_cycle = 33,
+ .rx_low_carrier_freq = 0,
+ .rx_high_carrier_freq = 0,
+
+ /* operations */
+ .get_irq_causes = it8708_get_irq_causes,
+ .enable_rx = it8708_enable_rx,
+ .idle_rx = it8708_idle_rx,
+ .disable_rx = it8708_idle_rx,
+ .get_rx_bytes = it8708_get_rx_bytes,
+ .enable_tx_interrupt = it8708_enable_tx_interrupt,
+ .disable_tx_interrupt =
+ it8708_disable_tx_interrupt,
+ .get_tx_used_slots = it8708_get_tx_used_slots,
+ .put_tx_byte = it8708_put_tx_byte,
+ .disable = it8708_disable,
+ .init_hardware = it8708_init_hardware,
+ .set_carrier_params = it8708_set_carrier_params,
+ },
+ { /* 3: ITE8709 */
+ .model = "ITE8709 CIR transceiver",
+ .io_region_size = IT8709_IOREG_LENGTH,
+ .hw_tx_capable = true,
+ .sample_period = (u32) (1000000000ULL / 115200),
+ .tx_carrier_freq = 38000,
+ .tx_duty_cycle = 33,
+ .rx_low_carrier_freq = 0,
+ .rx_high_carrier_freq = 0,
+
+ /* operations */
+ .get_irq_causes = it8709_get_irq_causes,
+ .enable_rx = it8709_enable_rx,
+ .idle_rx = it8709_idle_rx,
+ .disable_rx = it8709_idle_rx,
+ .get_rx_bytes = it8709_get_rx_bytes,
+ .enable_tx_interrupt = it8709_enable_tx_interrupt,
+ .disable_tx_interrupt =
+ it8709_disable_tx_interrupt,
+ .get_tx_used_slots = it8709_get_tx_used_slots,
+ .put_tx_byte = it8709_put_tx_byte,
+ .disable = it8709_disable,
+ .init_hardware = it8709_init_hardware,
+ .set_carrier_params = it8709_set_carrier_params,
+ },
+};
+
+static const struct pnp_device_id ite_ids[] = {
+ {"ITE8704", 0}, /* Default model */
+ {"ITE8713", 1}, /* CIR found in EEEBox 1501U */
+ {"ITE8708", 2}, /* Bridged IT8512 */
+ {"ITE8709", 3}, /* SRAM-Bridged IT8512 */
+ {"", 0},
+};
+
+/* allocate memory, probe hardware, and initialize everything */
+static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
+ *dev_id)
+{
+ const struct ite_dev_params *dev_desc = NULL;
+ struct ite_dev *itdev = NULL;
+ struct rc_dev *rdev = NULL;
+ int ret = -ENOMEM;
+ int model_no;
+
+ ite_dbg("%s called", __func__);
+
+ itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL);
+ if (!itdev)
+ return ret;
+
+ /* input device for IR remote (and tx) */
+ rdev = rc_allocate_device();
+ if (!rdev)
+ goto failure;
+
+ ret = -ENODEV;
+
+ /* get the model number */
+ model_no = (int)dev_id->driver_data;
+ ite_pr(KERN_NOTICE, "Auto-detected model: %s\n",
+ ite_dev_descs[model_no].model);
+
+ if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
+ model_no = model_number;
+ ite_pr(KERN_NOTICE, "The model has been fixed by a module "
+ "parameter.");
+ }
+
+ ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model);
+
+ /* get the description for the device */
+ dev_desc = &ite_dev_descs[model_no];
+
+ /* validate pnp resources */
+ if (!pnp_port_valid(pdev, 0) ||
+ pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+ dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+ goto failure;
+ }
+
+ if (!pnp_irq_valid(pdev, 0)) {
+ dev_err(&pdev->dev, "PNP IRQ not valid!\n");
+ goto failure;
+ }
+
+ /* store resource values */
+ itdev->cir_addr = pnp_port_start(pdev, 0);
+ itdev->cir_irq =pnp_irq(pdev, 0);
+
+ /* initialize spinlocks */
+ spin_lock_init(&itdev->lock);
+
+ /* initialize raw event */
+ init_ir_raw_event(&itdev->rawir);
+
+ ret = -EBUSY;
+ /* now claim resources */
+ if (!request_region(itdev->cir_addr,
+ dev_desc->io_region_size, ITE_DRIVER_NAME))
+ goto failure;
+
+ if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED,
+ ITE_DRIVER_NAME, (void *)itdev))
+ goto failure;
+
+ /* set driver data into the pnp device */
+ pnp_set_drvdata(pdev, itdev);
+ itdev->pdev = pdev;
+
+ /* initialize waitqueues for transmission */
+ init_waitqueue_head(&itdev->tx_queue);
+ init_waitqueue_head(&itdev->tx_ended);
+
+ /* copy model-specific parameters */
+ itdev->params = *dev_desc;
+
+ /* apply any overrides */
+ if (sample_period > 0)
+ itdev->params.sample_period = sample_period;
+
+ if (tx_carrier_freq > 0)
+ itdev->params.tx_carrier_freq = tx_carrier_freq;
+
+ if (tx_duty_cycle > 0 && tx_duty_cycle <= 100)
+ itdev->params.tx_duty_cycle = tx_duty_cycle;
+
+ if (rx_low_carrier_freq > 0)
+ itdev->params.rx_low_carrier_freq = rx_low_carrier_freq;
+
+ if (rx_high_carrier_freq > 0)
+ itdev->params.rx_high_carrier_freq = rx_high_carrier_freq;
+
+ /* print out parameters */
+ ite_pr(KERN_NOTICE, "TX-capable: %d\n", (int)
+ itdev->params.hw_tx_capable);
+ ite_pr(KERN_NOTICE, "Sample period (ns): %ld\n", (long)
+ itdev->params.sample_period);
+ ite_pr(KERN_NOTICE, "TX carrier frequency (Hz): %d\n", (int)
+ itdev->params.tx_carrier_freq);
+ ite_pr(KERN_NOTICE, "TX duty cycle (%%): %d\n", (int)
+ itdev->params.tx_duty_cycle);
+ ite_pr(KERN_NOTICE, "RX low carrier frequency (Hz): %d\n", (int)
+ itdev->params.rx_low_carrier_freq);
+ ite_pr(KERN_NOTICE, "RX high carrier frequency (Hz): %d\n", (int)
+ itdev->params.rx_high_carrier_freq);
+
+ /* set up hardware initial state */
+ itdev->params.init_hardware(itdev);
+
+ /* set up ir-core props */
+ rdev->priv = itdev;
+ rdev->driver_type = RC_DRIVER_IR_RAW;
+ rdev->allowed_protos = RC_TYPE_ALL;
+ rdev->open = ite_open;
+ rdev->close = ite_close;
+ rdev->s_idle = ite_s_idle;
+ rdev->s_rx_carrier_range = ite_set_rx_carrier_range;
+ rdev->min_timeout = ITE_MIN_IDLE_TIMEOUT;
+ rdev->max_timeout = ITE_MAX_IDLE_TIMEOUT;
+ rdev->timeout = ITE_IDLE_TIMEOUT;
+ rdev->rx_resolution = ITE_BAUDRATE_DIVISOR *
+ itdev->params.sample_period;
+ rdev->tx_resolution = ITE_BAUDRATE_DIVISOR *
+ itdev->params.sample_period;
+
+ /* set up transmitter related values if needed */
+ if (itdev->params.hw_tx_capable) {
+ rdev->tx_ir = ite_tx_ir;
+ rdev->s_tx_carrier = ite_set_tx_carrier;
+ rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
+ }
+
+ rdev->input_name = dev_desc->model;
+ rdev->input_id.bustype = BUS_HOST;
+ rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
+ rdev->input_id.product = 0;
+ rdev->input_id.version = 0;
+ rdev->driver_name = ITE_DRIVER_NAME;
+ rdev->map_name = RC_MAP_RC6_MCE;
+
+ ret = rc_register_device(rdev);
+ if (ret)
+ goto failure;
+
+ itdev->rdev = rdev;
+ ite_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+
+ return 0;
+
+failure:
+ if (itdev->cir_irq)
+ free_irq(itdev->cir_irq, itdev);
+
+ if (itdev->cir_addr)
+ release_region(itdev->cir_addr, itdev->params.io_region_size);
+
+ rc_free_device(rdev);
+ kfree(itdev);
+
+ return ret;
+}
+
+static void __devexit ite_remove(struct pnp_dev *pdev)
+{
+ struct ite_dev *dev = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable hardware */
+ dev->params.disable(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* free resources */
+ free_irq(dev->cir_irq, dev);
+ release_region(dev->cir_addr, dev->params.io_region_size);
+
+ rc_unregister_device(dev->rdev);
+
+ kfree(dev);
+}
+
+static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+ struct ite_dev *dev = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable all interrupts */
+ dev->params.disable(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+static int ite_resume(struct pnp_dev *pdev)
+{
+ int ret = 0;
+ struct ite_dev *dev = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ if (dev->transmitting) {
+ /* wake up the transmitter */
+ wake_up_interruptible(&dev->tx_queue);
+ } else {
+ /* enable the receiver */
+ dev->params.enable_rx(dev);
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return ret;
+}
+
+static void ite_shutdown(struct pnp_dev *pdev)
+{
+ struct ite_dev *dev = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ ite_dbg("%s called", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable all interrupts */
+ dev->params.disable(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static struct pnp_driver ite_driver = {
+ .name = ITE_DRIVER_NAME,
+ .id_table = ite_ids,
+ .probe = ite_probe,
+ .remove = __devexit_p(ite_remove),
+ .suspend = ite_suspend,
+ .resume = ite_resume,
+ .shutdown = ite_shutdown,
+};
+
+int ite_init(void)
+{
+ return pnp_register_driver(&ite_driver);
+}
+
+void ite_exit(void)
+{
+ pnp_unregister_driver(&ite_driver);
+}
+
+MODULE_DEVICE_TABLE(pnp, ite_ids);
+MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
+
+MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>");
+MODULE_LICENSE("GPL");
+
+module_init(ite_init);
+module_exit(ite_exit);
--- /dev/null
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512F CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ */
+
+/* platform driver name to register */
+#define ITE_DRIVER_NAME "ite-cir"
+
+/* logging macros */
+#define ite_pr(level, text, ...) \
+ printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+#define ite_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+#define ite_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+/* FIFO sizes */
+#define ITE_TX_FIFO_LEN 32
+#define ITE_RX_FIFO_LEN 32
+
+/* interrupt types */
+#define ITE_IRQ_TX_FIFO 1
+#define ITE_IRQ_RX_FIFO 2
+#define ITE_IRQ_RX_FIFO_OVERRUN 4
+
+/* forward declaration */
+struct ite_dev;
+
+/* struct for storing the parameters of different recognized devices */
+struct ite_dev_params {
+ /* model of the device */
+ const char *model;
+
+ /* size of the I/O region */
+ int io_region_size;
+
+ /* true if the hardware supports transmission */
+ bool hw_tx_capable;
+
+ /* base sampling period, in ns */
+ u32 sample_period;
+
+ /* rx low carrier frequency, in Hz, 0 means no demodulation */
+ unsigned int rx_low_carrier_freq;
+
+ /* tx high carrier frequency, in Hz, 0 means no demodulation */
+ unsigned int rx_high_carrier_freq;
+
+ /* tx carrier frequency, in Hz */
+ unsigned int tx_carrier_freq;
+
+ /* duty cycle, 0-100 */
+ int tx_duty_cycle;
+
+ /* hw-specific operation function pointers; most of these must be
+ * called while holding the spin lock, except for the TX FIFO length
+ * one */
+ /* get pending interrupt causes */
+ int (*get_irq_causes) (struct ite_dev * dev);
+
+ /* enable rx */
+ void (*enable_rx) (struct ite_dev * dev);
+
+ /* make rx enter the idle state; keep listening for a pulse, but stop
+ * streaming space bytes */
+ void (*idle_rx) (struct ite_dev * dev);
+
+ /* disable rx completely */
+ void (*disable_rx) (struct ite_dev * dev);
+
+ /* read bytes from RX FIFO; return read count */
+ int (*get_rx_bytes) (struct ite_dev * dev, u8 * buf, int buf_size);
+
+ /* enable tx FIFO space available interrupt */
+ void (*enable_tx_interrupt) (struct ite_dev * dev);
+
+ /* disable tx FIFO space available interrupt */
+ void (*disable_tx_interrupt) (struct ite_dev * dev);
+
+ /* get number of full TX FIFO slots */
+ int (*get_tx_used_slots) (struct ite_dev * dev);
+
+ /* put a byte to the TX FIFO */
+ void (*put_tx_byte) (struct ite_dev * dev, u8 value);
+
+ /* disable hardware completely */
+ void (*disable) (struct ite_dev * dev);
+
+ /* initialize the hardware */
+ void (*init_hardware) (struct ite_dev * dev);
+
+ /* set the carrier parameters */
+ void (*set_carrier_params) (struct ite_dev * dev, bool high_freq,
+ bool use_demodulator, u8 carrier_freq_bits,
+ u8 allowance_bits, u8 pulse_width_bits);
+};
+
+/* ITE CIR device structure */
+struct ite_dev {
+ struct pnp_dev *pdev;
+ struct rc_dev *rdev;
+ struct ir_raw_event rawir;
+
+ /* sync data */
+ spinlock_t lock;
+ bool in_use, transmitting;
+
+ /* transmit support */
+ int tx_fifo_allowance;
+ wait_queue_head_t tx_queue, tx_ended;
+
+ /* hardware I/O settings */
+ unsigned long cir_addr;
+ int cir_irq;
+
+ /* overridable copy of model parameters */
+ struct ite_dev_params params;
+};
+
+/* common values for all kinds of hardware */
+
+/* baud rate divisor default */
+#define ITE_BAUDRATE_DIVISOR 1
+
+/* low-speed carrier frequency limits (Hz) */
+#define ITE_LCF_MIN_CARRIER_FREQ 27000
+#define ITE_LCF_MAX_CARRIER_FREQ 58000
+
+/* high-speed carrier frequency limits (Hz) */
+#define ITE_HCF_MIN_CARRIER_FREQ 400000
+#define ITE_HCF_MAX_CARRIER_FREQ 500000
+
+/* default carrier freq for when demodulator is off (Hz) */
+#define ITE_DEFAULT_CARRIER_FREQ 38000
+
+/* default idling timeout in ns (0.2 seconds) */
+#define ITE_IDLE_TIMEOUT 200000000UL
+
+/* limit timeout values */
+#define ITE_MIN_IDLE_TIMEOUT 100000000UL
+#define ITE_MAX_IDLE_TIMEOUT 1000000000UL
+
+/* convert bits to us */
+#define ITE_BITS_TO_NS(bits, sample_period) \
+((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
+
+/*
+ * n in RDCR produces a tolerance of +/- n * 6.25% around the center
+ * carrier frequency...
+ *
+ * From two limit frequencies, L (low) and H (high), we can get both the
+ * center frequency F = (L + H) / 2 and the variation from the center
+ * frequency A = (H - L) / (H + L). We can use this in order to honor the
+ * s_rx_carrier_range() call in ir-core. We'll suppose that any request
+ * setting L=0 means we must shut down the demodulator.
+ */
+#define ITE_RXDCR_PER_10000_STEP 625
+
+/* high speed carrier freq values */
+#define ITE_CFQ_400 0x03
+#define ITE_CFQ_450 0x08
+#define ITE_CFQ_480 0x0b
+#define ITE_CFQ_500 0x0d
+
+/* values for pulse widths */
+#define ITE_TXMPW_A 0x02
+#define ITE_TXMPW_B 0x03
+#define ITE_TXMPW_C 0x04
+#define ITE_TXMPW_D 0x05
+#define ITE_TXMPW_E 0x06
+
+/* values for demodulator carrier range allowance */
+#define ITE_RXDCR_DEFAULT 0x01 /* default carrier range */
+#define ITE_RXDCR_MAX 0x07 /* default carrier range */
+
+/* DR TX bits */
+#define ITE_TX_PULSE 0x00
+#define ITE_TX_SPACE 0x80
+#define ITE_TX_MAX_RLE 0x80
+#define ITE_TX_RLE_MASK 0x7f
+
+/*
+ * IT8712F
+ *
+ * hardware data obtained from:
+ *
+ * IT8712F
+ * Environment Control – Low Pin Count Input / Output
+ * (EC - LPC I/O)
+ * Preliminary Specification V0. 81
+ */
+
+/* register offsets */
+#define IT87_DR 0x00 /* data register */
+#define IT87_IER 0x01 /* interrupt enable register */
+#define IT87_RCR 0x02 /* receiver control register */
+#define IT87_TCR1 0x03 /* transmitter control register 1 */
+#define IT87_TCR2 0x04 /* transmitter control register 2 */
+#define IT87_TSR 0x05 /* transmitter status register */
+#define IT87_RSR 0x06 /* receiver status register */
+#define IT87_BDLR 0x05 /* baud rate divisor low byte register */
+#define IT87_BDHR 0x06 /* baud rate divisor high byte register */
+#define IT87_IIR 0x07 /* interrupt identification register */
+
+#define IT87_IOREG_LENGTH 0x08 /* length of register file */
+
+/* IER bits */
+#define IT87_TLDLIE 0x01 /* transmitter low data interrupt enable */
+#define IT87_RDAIE 0x02 /* receiver data available interrupt enable */
+#define IT87_RFOIE 0x04 /* receiver FIFO overrun interrupt enable */
+#define IT87_IEC 0x08 /* interrupt enable control */
+#define IT87_BR 0x10 /* baud rate register enable */
+#define IT87_RESET 0x20 /* reset */
+
+/* RCR bits */
+#define IT87_RXDCR 0x07 /* receiver demodulation carrier range mask */
+#define IT87_RXACT 0x08 /* receiver active */
+#define IT87_RXEND 0x10 /* receiver demodulation enable */
+#define IT87_RXEN 0x20 /* receiver enable */
+#define IT87_HCFS 0x40 /* high-speed carrier frequency select */
+#define IT87_RDWOS 0x80 /* receiver data without sync */
+
+/* TCR1 bits */
+#define IT87_TXMPM 0x03 /* transmitter modulation pulse mode mask */
+#define IT87_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
+#define IT87_TXENDF 0x04 /* transmitter deferral */
+#define IT87_TXRLE 0x08 /* transmitter run length enable */
+#define IT87_FIFOTL 0x30 /* FIFO level threshold mask */
+#define IT87_FIFOTL_DEFAULT 0x20 /* FIFO level threshold default
+ * 0x00 -> 1, 0x10 -> 7, 0x20 -> 17,
+ * 0x30 -> 25 */
+#define IT87_ILE 0x40 /* internal loopback enable */
+#define IT87_FIFOCLR 0x80 /* FIFO clear bit */
+
+/* TCR2 bits */
+#define IT87_TXMPW 0x07 /* transmitter modulation pulse width mask */
+#define IT87_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
+#define IT87_CFQ 0xf8 /* carrier frequency mask */
+#define IT87_CFQ_SHIFT 3 /* carrier frequency bit shift */
+
+/* TSR bits */
+#define IT87_TXFBC 0x3f /* transmitter FIFO byte count mask */
+
+/* RSR bits */
+#define IT87_RXFBC 0x3f /* receiver FIFO byte count mask */
+#define IT87_RXFTO 0x80 /* receiver FIFO time-out */
+
+/* IIR bits */
+#define IT87_IP 0x01 /* interrupt pending */
+#define IT87_II 0x06 /* interrupt identification mask */
+#define IT87_II_NOINT 0x00 /* no interrupt */
+#define IT87_II_TXLDL 0x02 /* transmitter low data level */
+#define IT87_II_RXDS 0x04 /* receiver data stored */
+#define IT87_II_RXFO 0x06 /* receiver FIFO overrun */
+
+/*
+ * IT8512E/F
+ *
+ * Hardware data obtained from:
+ *
+ * IT8512E/F
+ * Embedded Controller
+ * Preliminary Specification V0.4.1
+ *
+ * Note that the CIR registers are not directly available to the host, because
+ * they only are accessible to the integrated microcontroller. Thus, in order
+ * use it, some kind of bridging is required. As the bridging may depend on
+ * the controller firmware in use, we are going to use the PNP ID in order to
+ * determine the strategy and ports available. See after these generic
+ * IT8512E/F register definitions for register definitions for those
+ * strategies.
+ */
+
+/* register offsets */
+#define IT85_C0DR 0x00 /* data register */
+#define IT85_C0MSTCR 0x01 /* master control register */
+#define IT85_C0IER 0x02 /* interrupt enable register */
+#define IT85_C0IIR 0x03 /* interrupt identification register */
+#define IT85_C0CFR 0x04 /* carrier frequency register */
+#define IT85_C0RCR 0x05 /* receiver control register */
+#define IT85_C0TCR 0x06 /* transmitter control register */
+#define IT85_C0SCK 0x07 /* slow clock control register */
+#define IT85_C0BDLR 0x08 /* baud rate divisor low byte register */
+#define IT85_C0BDHR 0x09 /* baud rate divisor high byte register */
+#define IT85_C0TFSR 0x0a /* transmitter FIFO status register */
+#define IT85_C0RFSR 0x0b /* receiver FIFO status register */
+#define IT85_C0WCL 0x0d /* wakeup code length register */
+#define IT85_C0WCR 0x0e /* wakeup code read/write register */
+#define IT85_C0WPS 0x0f /* wakeup power control/status register */
+
+#define IT85_IOREG_LENGTH 0x10 /* length of register file */
+
+/* C0MSTCR bits */
+#define IT85_RESET 0x01 /* reset */
+#define IT85_FIFOCLR 0x02 /* FIFO clear bit */
+#define IT85_FIFOTL 0x0c /* FIFO level threshold mask */
+#define IT85_FIFOTL_DEFAULT 0x08 /* FIFO level threshold default
+ * 0x00 -> 1, 0x04 -> 7, 0x08 -> 17,
+ * 0x0c -> 25 */
+#define IT85_ILE 0x10 /* internal loopback enable */
+#define IT85_ILSEL 0x20 /* internal loopback select */
+
+/* C0IER bits */
+#define IT85_TLDLIE 0x01 /* TX low data level interrupt enable */
+#define IT85_RDAIE 0x02 /* RX data available interrupt enable */
+#define IT85_RFOIE 0x04 /* RX FIFO overrun interrupt enable */
+#define IT85_IEC 0x80 /* interrupt enable function control */
+
+/* C0IIR bits */
+#define IT85_TLDLI 0x01 /* transmitter low data level interrupt */
+#define IT85_RDAI 0x02 /* receiver data available interrupt */
+#define IT85_RFOI 0x04 /* receiver FIFO overrun interrupt */
+#define IT85_NIP 0x80 /* no interrupt pending */
+
+/* C0CFR bits */
+#define IT85_CFQ 0x1f /* carrier frequency mask */
+#define IT85_HCFS 0x20 /* high speed carrier frequency select */
+
+/* C0RCR bits */
+#define IT85_RXDCR 0x07 /* receiver demodulation carrier range mask */
+#define IT85_RXACT 0x08 /* receiver active */
+#define IT85_RXEND 0x10 /* receiver demodulation enable */
+#define IT85_RDWOS 0x20 /* receiver data without sync */
+#define IT85_RXEN 0x80 /* receiver enable */
+
+/* C0TCR bits */
+#define IT85_TXMPW 0x07 /* transmitter modulation pulse width mask */
+#define IT85_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
+#define IT85_TXMPM 0x18 /* transmitter modulation pulse mode mask */
+#define IT85_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
+#define IT85_TXENDF 0x20 /* transmitter deferral */
+#define IT85_TXRLE 0x40 /* transmitter run length enable */
+
+/* C0SCK bits */
+#define IT85_SCKS 0x01 /* slow clock select */
+#define IT85_TXDCKG 0x02 /* TXD clock gating */
+#define IT85_DLL1P8E 0x04 /* DLL 1.8432M enable */
+#define IT85_DLLTE 0x08 /* DLL test enable */
+#define IT85_BRCM 0x70 /* baud rate count mode */
+#define IT85_DLLOCK 0x80 /* DLL lock */
+
+/* C0TFSR bits */
+#define IT85_TXFBC 0x3f /* transmitter FIFO count mask */
+
+/* C0RFSR bits */
+#define IT85_RXFBC 0x3f /* receiver FIFO count mask */
+#define IT85_RXFTO 0x80 /* receiver FIFO time-out */
+
+/* C0WCL bits */
+#define IT85_WCL 0x3f /* wakeup code length mask */
+
+/* C0WPS bits */
+#define IT85_CIRPOSIE 0x01 /* power on/off status interrupt enable */
+#define IT85_CIRPOIS 0x02 /* power on/off interrupt status */
+#define IT85_CIRPOII 0x04 /* power on/off interrupt identification */
+#define IT85_RCRST 0x10 /* wakeup code reading counter reset bit */
+#define IT85_WCRST 0x20 /* wakeup code writing counter reset bit */
+
+/*
+ * ITE8708
+ *
+ * Hardware data obtained from hacked driver for IT8512 in this forum post:
+ *
+ * http://ubuntuforums.org/showthread.php?t=1028640
+ *
+ * Although there's no official documentation for that driver, analysis would
+ * suggest that it maps the 16 registers of IT8512 onto two 8-register banks,
+ * selectable by a single bank-select bit that's mapped onto both banks. The
+ * IT8512 registers are mapped in a different order, so that the first bank
+ * maps the ones that are used more often, and two registers that share a
+ * reserved high-order bit are placed at the same offset in both banks in
+ * order to reuse the reserved bit as the bank select bit.
+ */
+
+/* register offsets */
+
+/* mapped onto both banks */
+#define IT8708_BANKSEL 0x07 /* bank select register */
+#define IT8708_HRAE 0x80 /* high registers access enable */
+
+/* mapped onto the low bank */
+#define IT8708_C0DR 0x00 /* data register */
+#define IT8708_C0MSTCR 0x01 /* master control register */
+#define IT8708_C0IER 0x02 /* interrupt enable register */
+#define IT8708_C0IIR 0x03 /* interrupt identification register */
+#define IT8708_C0RFSR 0x04 /* receiver FIFO status register */
+#define IT8708_C0RCR 0x05 /* receiver control register */
+#define IT8708_C0TFSR 0x06 /* transmitter FIFO status register */
+#define IT8708_C0TCR 0x07 /* transmitter control register */
+
+/* mapped onto the high bank */
+#define IT8708_C0BDLR 0x01 /* baud rate divisor low byte register */
+#define IT8708_C0BDHR 0x02 /* baud rate divisor high byte register */
+#define IT8708_C0CFR 0x04 /* carrier frequency register */
+
+/* registers whose bank mapping we don't know, since they weren't being used
+ * in the hacked driver... most probably they belong to the high bank too,
+ * since they fit in the holes the other registers leave */
+#define IT8708_C0SCK 0x03 /* slow clock control register */
+#define IT8708_C0WCL 0x05 /* wakeup code length register */
+#define IT8708_C0WCR 0x06 /* wakeup code read/write register */
+#define IT8708_C0WPS 0x07 /* wakeup power control/status register */
+
+#define IT8708_IOREG_LENGTH 0x08 /* length of register file */
+
+/* two more registers that are defined in the hacked driver, but can't be
+ * found in the data sheets; no idea what they are or how they are accessed,
+ * since the hacked driver doesn't seem to use them */
+#define IT8708_CSCRR 0x00
+#define IT8708_CGPINTR 0x01
+
+/* CSCRR bits */
+#define IT8708_CSCRR_SCRB 0x3f
+#define IT8708_CSCRR_PM 0x80
+
+/* CGPINTR bits */
+#define IT8708_CGPINT 0x01
+
+/*
+ * ITE8709
+ *
+ * Hardware interfacing data obtained from the original lirc_ite8709 driver.
+ * Verbatim from its sources:
+ *
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the
+ * micro-controller.
+ *
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the
+ * communication protocol is not, so it was reverse-engineered.
+ */
+
+/* register offsets */
+#define IT8709_RAM_IDX 0x00 /* index into the SRAM module bytes */
+#define IT8709_RAM_VAL 0x01 /* read/write data to the indexed byte */
+
+#define IT8709_IOREG_LENGTH 0x02 /* length of register file */
+
+/* register offsets inside the SRAM module */
+#define IT8709_MODE 0x1a /* request/ack byte */
+#define IT8709_REG_IDX 0x1b /* index of the CIR register to access */
+#define IT8709_REG_VAL 0x1c /* value read/to be written */
+#define IT8709_IIR 0x1e /* interrupt identification register */
+#define IT8709_RFSR 0x1f /* receiver FIFO status register */
+#define IT8709_FIFO 0x20 /* start of in RAM RX FIFO copy */
+
+/* MODE values */
+#define IT8709_IDLE 0x00
+#define IT8709_WRITE 0x01
+#define IT8709_READ 0x02
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff