* @thresh_low: low threshold values
* @vref: Reference voltage regulator
* @vref_uv: Actual (external or internal) reference voltage
+ * @send: function used to send data to the chip
+ * @recv: function used to receive data from the chip
*/
struct max1363_state {
struct i2c_client *client;
s16 thresh_low[8];
struct regulator *vref;
u32 vref_uv;
+ int (*send)(const struct i2c_client *client,
+ const char *buf, int count);
+ int (*recv)(const struct i2c_client *client,
+ char *buf, int count);
};
#define MAX1363_MODE_SINGLE(_num, _mask) { \
return NULL;
}
-static int max1363_write_basic_config(struct i2c_client *client,
- unsigned char d1,
- unsigned char d2)
+static int max1363_smbus_send(const struct i2c_client *client, const char *buf,
+ int count)
{
- u8 tx_buf[2] = {d1, d2};
+ int i, err;
- return i2c_master_send(client, tx_buf, 2);
+ for (i = err = 0; err == 0 && i < count; ++i)
+ err = i2c_smbus_write_byte(client, buf[i]);
+
+ return err ? err : count;
+}
+
+static int max1363_smbus_recv(const struct i2c_client *client, char *buf,
+ int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; ++i) {
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0)
+ return ret;
+ buf[i] = ret;
+ }
+
+ return count;
+}
+
+static int max1363_write_basic_config(struct max1363_state *st)
+{
+ u8 tx_buf[2] = { st->setupbyte, st->configbyte };
+
+ return st->send(st->client, tx_buf, 2);
}
static int max1363_set_scan_mode(struct max1363_state *st)
| MAX1363_SE_DE_MASK);
st->configbyte |= st->current_mode->conf;
- return max1363_write_basic_config(st->client,
- st->setupbyte,
- st->configbyte);
+ return max1363_write_basic_config(st);
}
static int max1363_read_single_chan(struct iio_dev *indio_dev,
}
if (st->chip_info->bits != 8) {
/* Get reading */
- data = i2c_master_recv(client, rxbuf, 2);
+ data = st->recv(client, rxbuf, 2);
if (data < 0) {
ret = data;
goto error_ret;
((1 << st->chip_info->bits) - 1);
} else {
/* Get reading */
- data = i2c_master_recv(client, rxbuf, 1);
+ data = st->recv(client, rxbuf, 1);
if (data < 0) {
ret = data;
goto error_ret;
u8 tx[2] = { st->setupbyte,
MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
- i2c_master_recv(st->client, &rx, 1);
+ st->recv(st->client, &rx, 1);
mask = rx;
for_each_set_bit(loc, &mask, 8)
iio_push_event(indio_dev, max1363_event_codes[loc], timestamp);
- i2c_master_send(st->client, tx, 2);
+ st->send(st->client, tx, 2);
return IRQ_HANDLED;
}
st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
st->configbyte &= ~MAX1363_SCAN_MASK;
st->monitor_on = false;
- return max1363_write_basic_config(st->client,
- st->setupbyte,
- st->configbyte);
+ return max1363_write_basic_config(st);
}
/* Ensure we are in the relevant mode */
}
- ret = i2c_master_send(st->client, tx_buf, len);
+ ret = st->send(st->client, tx_buf, len);
if (ret < 0)
goto error_ret;
if (ret != len) {
*/
tx_buf[0] = st->setupbyte;
tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
- ret = i2c_master_send(st->client, tx_buf, 2);
+ ret = st->send(st->client, tx_buf, 2);
if (ret < 0)
goto error_ret;
if (ret != 2) {
if (rxbuf == NULL)
goto done;
if (st->chip_info->bits != 8)
- b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
+ b_sent = st->recv(st->client, rxbuf, numvals * 2);
else
- b_sent = i2c_master_recv(st->client, rxbuf, numvals);
+ b_sent = st->recv(st->client, rxbuf, numvals);
if (b_sent < 0)
goto done_free;
st->vref_uv = vref_uv;
}
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ st->send = i2c_master_send;
+ st->recv = i2c_master_recv;
+ } else if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)
+ && st->chip_info->bits == 8) {
+ st->send = max1363_smbus_send;
+ st->recv = max1363_smbus_recv;
+ } else {
+ ret = -EOPNOTSUPP;
+ goto error_disable_reg;
+ }
+
ret = max1363_alloc_scan_masks(indio_dev);
if (ret)
goto error_disable_reg;