staging: comedi: ni_mio_common: use comedi_dio_update_state()

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Remove the DEBUG_DIO, its just added noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 4e02770e834bd7df20e8f015c92750ba4efb05a1..b9df2eeae6fbf6a7ca3689fb9212d8b713938c42 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -3547,28 +3547,22 @@ static int ni_dio_insn_config(struct comedi_device *dev,
 
 static int ni_dio_insn_bits(struct comedi_device *dev,
                            struct comedi_subdevice *s,
-                           struct comedi_insn *insn, unsigned int *data)
+                           struct comedi_insn *insn,
+                           unsigned int *data)
 {
        struct ni_private *devpriv = dev->private;
 
-#ifdef DEBUG_DIO
-       printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
-#endif
-
-       if (data[0]) {
-               /* Perform check to make sure we're not using the
-                  serial part of the dio */
-               if ((data[0] & (DIO_SDIN | DIO_SDOUT))
-                   && devpriv->serial_interval_ns)
-                       return -EBUSY;
+       /* Make sure we're not using the serial part of the dio */
+       if ((data[0] & (DIO_SDIN | DIO_SDOUT)) && devpriv->serial_interval_ns)
+               return -EBUSY;
 
-               s->state &= ~data[0];
-               s->state |= (data[0] & data[1]);
+       if (comedi_dio_update_state(s, data)) {
                devpriv->dio_output &= ~DIO_Parallel_Data_Mask;
                devpriv->dio_output |= DIO_Parallel_Data_Out(s->state);
                devpriv->stc_writew(dev, devpriv->dio_output,
                                    DIO_Output_Register);
        }
+
        data[1] = devpriv->stc_readw(dev, DIO_Parallel_Input_Register);
 
        return insn->n;
@@ -3598,16 +3592,9 @@ static int ni_m_series_dio_insn_bits(struct comedi_device *dev,
 {
        struct ni_private *devpriv __maybe_unused = dev->private;
 
-#ifdef DEBUG_DIO
-       printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
-              data[1]);
-#endif
-
-       if (data[0]) {
-               s->state &= ~data[0];
-               s->state |= (data[0] & data[1]);
+       if (comedi_dio_update_state(s, data))
                ni_writel(s->state, M_Offset_Static_Digital_Output);
-       }
+
        data[1] = ni_readl(M_Offset_Static_Digital_Input);
 
        return insn->n;
@@ -5355,20 +5342,20 @@ static int ni_config_filter(struct comedi_device *dev, unsigned pfi_channel,
 
 static int ni_pfi_insn_bits(struct comedi_device *dev,
                            struct comedi_subdevice *s,
-                           struct comedi_insn *insn, unsigned int *data)
+                           struct comedi_insn *insn,
+                           unsigned int *data)
 {
        const struct ni_board_struct *board = comedi_board(dev);
        struct ni_private *devpriv __maybe_unused = dev->private;
 
-       if ((board->reg_type & ni_reg_m_series_mask) == 0) {
+       if (!(board->reg_type & ni_reg_m_series_mask))
                return -ENOTSUPP;
-       }
-       if (data[0]) {
-               s->state &= ~data[0];
-               s->state |= (data[0] & data[1]);
+
+       if (comedi_dio_update_state(s, data))
                ni_writew(s->state, M_Offset_PFI_DO);
-       }
+
        data[1] = ni_readw(M_Offset_PFI_DI);
+
        return insn->n;
 }