rtc: ignore msb when reading back mday from alarm
authorMark Lord <lkml@rtr.ca>
Sun, 4 Nov 2007 02:04:03 +0000 (22:04 -0400)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Sun, 4 Nov 2007 21:13:09 +0000 (13:13 -0800)
I have a system here that actively relies upon RTC wake alarms, and it
has been failing (again) for a few days when attempting to use the
/sys/class/rtc/rtc?/wakealarm interface.

The old (fixed by Linus) /proc/ interface still works, but I'd like to
get it using the new one.

This patch fixes rtc-cmos to ignore the two upper bits when reading the
BCD mday (day of month) register from CMOS.  Some systems (eg.  mine)
seem to have the top bit set to "1" for some reason.

The older /proc/ interface ignores the upper bits, and so we should too.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-cmos.c

index e3fe83a23cf720049018dadb623de3c8b28d78d1..29cf1457ca10f507104a5a54d9fedd88f0544a95 100644 (file)
@@ -120,7 +120,8 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
        t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
 
        if (cmos->day_alrm) {
-               t->time.tm_mday = CMOS_READ(cmos->day_alrm);
+               /* ignore upper bits on readback per ACPI spec */
+               t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
                if (!t->time.tm_mday)
                        t->time.tm_mday = -1;