usb: ohci-da8xx: Remove code that references mach

Including mach/* is frowned upon in device drivers, so get rid of it.

This replaces usb20_clk and code that pokes CFGCHIP2 with a proper phy
driver.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0b80cee30da4740e8c28c6ea7a4cc700163a12ee..83b6cec20b33a5a3b0204bd707aed570521dcfad 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -482,6 +482,7 @@ config USB_OHCI_HCD_DAVINCI
        bool "OHCI support for TI DaVinci DA8xx"
        depends on ARCH_DAVINCI_DA8XX
        depends on USB_OHCI_HCD=y
+       select PHY_DA8XX_USB
        default y
        help
          Enables support for the DaVinci DA8xx integrated OHCI

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index e5c33bc98ea499df5f3ab6a61c488b717734588d..3656d7cea58c109637c34d423283be29cf449b1d 100644 (file)
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -15,58 +15,50 @@
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-
-#include <mach/da8xx.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/usb-davinci.h>
 
 #ifndef CONFIG_ARCH_DAVINCI_DA8XX
 #error "This file is DA8xx bus glue.  Define CONFIG_ARCH_DAVINCI_DA8XX."
 #endif
 
-#define CFGCHIP2       DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
-
 static struct clk *usb11_clk;
-static struct clk *usb20_clk;
+static struct phy *usb11_phy;
 
 /* Over-current indicator change bitmask */
 static volatile u16 ocic_mask;
 
-static void ohci_da8xx_clock(int on)
+static int ohci_da8xx_enable(void)
 {
-       u32 cfgchip2;
-
-       cfgchip2 = __raw_readl(CFGCHIP2);
-       if (on) {
-               clk_enable(usb11_clk);
-
-               /*
-                * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
-                * need to enable the USB 2.0 module clocking, start its PHY,
-                * and not allow it to stop the clock during USB 2.0 suspend.
-                */
-               if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
-                       clk_enable(usb20_clk);
-
-                       cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
-                       cfgchip2 |= CFGCHIP2_PHY_PLLON;
-                       __raw_writel(cfgchip2, CFGCHIP2);
-
-                       pr_info("Waiting for USB PHY clock good...\n");
-                       while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
-                               cpu_relax();
-               }
+       int ret;
 
-               /* Enable USB 1.1 PHY */
-               cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
-       } else {
-               clk_disable(usb11_clk);
-               if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
-                       clk_disable(usb20_clk);
+       ret = clk_prepare_enable(usb11_clk);
+       if (ret)
+               return ret;
 
-               /* Disable USB 1.1 PHY */
-               cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
-       }
-       __raw_writel(cfgchip2, CFGCHIP2);
+       ret = phy_init(usb11_phy);
+       if (ret)
+               goto err_phy_init;
+
+       ret = phy_power_on(usb11_phy);
+       if (ret)
+               goto err_phy_power_on;
+
+       return 0;
+
+err_phy_power_on:
+       phy_exit(usb11_phy);
+err_phy_init:
+       clk_disable_unprepare(usb11_clk);
+
+       return ret;
+}
+
+static void ohci_da8xx_disable(void)
+{
+       phy_power_off(usb11_phy);
+       phy_exit(usb11_phy);
+       clk_disable_unprepare(usb11_clk);
 }
 
 /*
@@ -92,7 +84,9 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
 
        dev_dbg(dev, "starting USB controller\n");
 
-       ohci_da8xx_clock(1);
+       result = ohci_da8xx_enable();
+       if (result < 0)
+               return result;
 
        /*
         * DA8xx only have 1 port connected to the pins but the HC root hub
@@ -101,8 +95,10 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
        ohci->num_ports = 1;
 
        result = ohci_init(ohci);
-       if (result < 0)
+       if (result < 0) {
+               ohci_da8xx_disable();
                return result;
+       }
 
        /*
         * Since we're providing a board-specific root hub port power control
@@ -129,7 +125,7 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
 static void ohci_da8xx_stop(struct usb_hcd *hcd)
 {
        ohci_stop(hcd);
-       ohci_da8xx_clock(0);
+       ohci_da8xx_disable();
 }
 
 static int ohci_da8xx_start(struct usb_hcd *hcd)
@@ -301,12 +297,18 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
                return -ENODEV;
 
        usb11_clk = devm_clk_get(&pdev->dev, "usb11");
-       if (IS_ERR(usb11_clk))
+       if (IS_ERR(usb11_clk)) {
+               if (PTR_ERR(usb11_clk) != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Failed to get clock.\n");
                return PTR_ERR(usb11_clk);
+       }
 
-       usb20_clk = devm_clk_get(&pdev->dev, "usb20");
-       if (IS_ERR(usb20_clk))
-               return PTR_ERR(usb20_clk);
+       usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
+       if (IS_ERR(usb11_phy)) {
+               if (PTR_ERR(usb11_phy) != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Failed to get phy.\n");
+               return PTR_ERR(usb11_phy);
+       }
 
        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
        if (!hcd)
@@ -316,6 +318,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
        hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
        if (IS_ERR(hcd->regs)) {
                error = PTR_ERR(hcd->regs);
+               dev_err(&pdev->dev, "failed to map ohci.\n");
                goto err;
        }
        hcd->rsrc_start = mem->start;
@@ -397,7 +400,7 @@ static int ohci_da8xx_suspend(struct platform_device *pdev,
        if (ret)
                return ret;
 
-       ohci_da8xx_clock(0);
+       ohci_da8xx_disable();
        hcd->state = HC_STATE_SUSPENDED;
 
        return ret;
@@ -407,14 +410,19 @@ static int ohci_da8xx_resume(struct platform_device *dev)
 {
        struct usb_hcd  *hcd    = platform_get_drvdata(dev);
        struct ohci_hcd *ohci   = hcd_to_ohci(hcd);
+       int ret;
 
        if (time_before(jiffies, ohci->next_statechange))
                msleep(5);
        ohci->next_statechange = jiffies;
 
-       ohci_da8xx_clock(1);
+       ret = ohci_da8xx_enable();
+       if (ret)
+               return ret;
+
        dev->dev.power.power_state = PMSG_ON;
        usb_hcd_resume_root_hub(hcd);
+
        return 0;
 }
 #endif