serial: bfin_sport_uart: drop useless status masks

These were all copied over from the Blackfin UART driver, but they don't
make sense here because these bits are all specific to the Blackfin UART.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 6ee73da6976bfb19c7dd06f56aaf6dc5b63c0cc5..b9938acb0309dcae7920169073cc6999a269d45c 100644 (file)
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -500,27 +500,12 @@ static void sport_set_termios(struct uart_port *port,
 
        spin_lock_irqsave(&up->port.lock, flags);
 
-       port->read_status_mask = OE;
-       if (termios->c_iflag & INPCK)
-               port->read_status_mask |= (FE | PE);
-       if (termios->c_iflag & (BRKINT | PARMRK))
-               port->read_status_mask |= BI;
+       port->read_status_mask = 0;
 
        /*
         * Characters to ignore
         */
        port->ignore_status_mask = 0;
-       if (termios->c_iflag & IGNPAR)
-               port->ignore_status_mask |= FE | PE;
-       if (termios->c_iflag & IGNBRK) {
-               port->ignore_status_mask |= BI;
-               /*
-                * If we're ignoring parity and break indicators,
-                * ignore overruns too (for real raw support).
-                */
-               if (termios->c_iflag & IGNPAR)
-                       port->ignore_status_mask |= OE;
-       }
 
        /* RX extract mask */
        up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);