return ret;
}
-void line_set_termios(struct tty_struct *tty, struct termios * old)
+void line_set_termios(struct tty_struct *tty, struct ktermios * old)
{
/* nothing */
}
extern int line_write(struct tty_struct *tty, const unsigned char *buf,
int len);
extern void line_put_char(struct tty_struct *tty, unsigned char ch);
-extern void line_set_termios(struct tty_struct *tty, struct termios * old);
+extern void line_set_termios(struct tty_struct *tty, struct ktermios * old);
extern int line_chars_in_buffer(struct tty_struct *tty);
extern void line_flush_buffer(struct tty_struct *tty);
extern void line_flush_chars(struct tty_struct *tty);
static unsigned char current_ctl_bits;
-static void change_speed(struct async_struct *info, struct termios *old);
+static void change_speed(struct async_struct *info, struct ktermios *old);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
* the specified baud rate for a serial port.
*/
static void change_speed(struct async_struct *info,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int quot = 0, baud_base, baud;
unsigned cflag, cval = 0;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
* where old == NULL, and try to do something rational.
*/
static void
-cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
+cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
unsigned int, unsigned long);
static int info_ioctl(struct tty_struct *, struct file *,
unsigned int, unsigned long);
-static void pc_set_termios(struct tty_struct *, struct termios *);
+static void pc_set_termios(struct tty_struct *, struct ktermios *);
static void do_softint(struct work_struct *work);
static void pc_stop(struct tty_struct *);
static void pc_start(struct tty_struct *);
pc_driver->init_termios.c_oflag = 0;
pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
pc_driver->init_termios.c_lflag = 0;
+ pc_driver->init_termios.c_ispeed = 9600;
+ pc_driver->init_termios.c_ospeed = 9600;
pc_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(pc_driver, &pc_ops);
pc_info->init_termios.c_oflag = 0;
pc_info->init_termios.c_lflag = 0;
pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+ pc_info->init_termios.c_ispeed = 9600;
+ pc_info->init_termios.c_ospeed = 9600;
pc_info->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(pc_info, &info_ops);
{ /* Begin epcaparam */
unsigned int cmdHead;
- struct termios *ts;
+ struct ktermios *ts;
struct board_chan __iomem *bc;
unsigned mval, hflow, cflag, iflag;
{ /* Begin receive_data */
unchar *rptr;
- struct termios *ts = NULL;
+ struct ktermios *ts = NULL;
struct tty_struct *tty;
struct board_chan __iomem *bc;
int dataToRead, wrapgap, bytesAvailable;
switch (cmd)
{ /* Begin switch cmd */
+#if 0 /* Handled by calling layer properly */
case TCGETS:
- if (copy_to_user(argp, tty->termios, sizeof(struct termios)))
+ if (copy_to_user(argp, tty->termios, sizeof(struct ktermios)))
return -EFAULT;
return 0;
case TCGETA:
return get_termio(tty, argp);
+#endif
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
/* --------------------- Begin pc_set_termios ----------------------- */
-static void pc_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{ /* Begin pc_set_termios */
struct channel *ch;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct esp_struct *info = (struct esp_struct *)tty->driver_data;
unsigned long flags;
void gs_set_termios (struct tty_struct * tty,
- struct termios * old_termios)
+ struct ktermios * old_termios)
{
struct gs_port *port;
int baudrate, tmp, rv;
- struct termios *tiosp;
+ struct ktermios *tiosp;
func_enter();
* that will cause echoing or we'll go into recursive loop echoing chars back
* and forth with the console drivers.
*/
-static struct termios hvcs_tty_termios = {
+static struct ktermios hvcs_tty_termios = {
.c_iflag = IGNBRK | IGNPAR,
.c_oflag = OPOST,
.c_cflag = B38400 | CS8 | CREAD | HUPCL,
- .c_cc = INIT_C_CC
+ .c_cc = INIT_C_CC,
+ .c_ispeed = 38400,
+ .c_ospeed = 38400
};
/*
hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM;
hvsi_driver->init_termios = tty_std_termios;
hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+ hvsi_driver->init_termios.c_ispeed = 9600;
+ hvsi_driver->init_termios.c_ospeed = 9600;
hvsi_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(hvsi_driver, &hvsi_ops);
static int ip2_chars_in_buf(PTTY);
static void ip2_flush_buffer(PTTY);
static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
-static void ip2_set_termios(PTTY, struct termios *);
+static void ip2_set_termios(PTTY, struct ktermios *);
static void ip2_set_line_discipline(PTTY);
static void ip2_throttle(PTTY);
static void ip2_unthrottle(PTTY);
static void ip2_wait_until_sent(PTTY,int);
-static void set_params (i2ChanStrPtr, struct termios *);
+static void set_params (i2ChanStrPtr, struct ktermios *);
static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
/* */
/******************************************************************************/
static void
-ip2_set_termios( PTTY tty, struct termios *old_termios )
+ip2_set_termios( PTTY tty, struct ktermios *old_termios )
{
i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
/* change. */
/******************************************************************************/
static void
-set_params( i2ChanStrPtr pCh, struct termios *o_tios )
+set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
{
tcflag_t cflag, iflag, lflag;
char stop_char, start_char;
- struct termios dummy;
+ struct ktermios dummy;
lflag = pCh->pTTY->termios->c_lflag;
cflag = pCh->pTTY->termios->c_cflag;
/* set_termios et all */
static void isicom_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct isi_port *port = tty->driver_data;
* with this termios initially. Basically all it defines is a raw port
* at 9600 baud, 8 data bits, no parity, 1 stop bit.
*/
-static struct termios stli_deftermios = {
+static struct ktermios stli_deftermios = {
.c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
.c_cc = INIT_C_CC,
+ .c_ispeed = 9600,
+ .c_ospeed = 9600,
};
/*
static int stli_writeroom(struct tty_struct *tty);
static int stli_charsinbuffer(struct tty_struct *tty);
static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void stli_settermios(struct tty_struct *tty, struct termios *old);
+static void stli_settermios(struct tty_struct *tty, struct ktermios *old);
static void stli_throttle(struct tty_struct *tty);
static void stli_unthrottle(struct tty_struct *tty);
static void stli_stop(struct tty_struct *tty);
static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp);
+static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
static void stli_read(stlibrd_t *brdp, stliport_t *portp);
* Looks like it is true for the current ttys implementation..!!
*/
-static void stli_settermios(struct tty_struct *tty, struct termios *old)
+static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
{
stliport_t *portp;
stlibrd_t *brdp;
- struct termios *tiosp;
+ struct ktermios *tiosp;
asyport_t aport;
if (tty == NULL)
* the slave.
*/
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp)
+static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long);
static void moxa_throttle(struct tty_struct *);
static void moxa_unthrottle(struct tty_struct *);
-static void moxa_set_termios(struct tty_struct *, struct termios *);
+static void moxa_set_termios(struct tty_struct *, struct ktermios *);
static void moxa_stop(struct tty_struct *);
static void moxa_start(struct tty_struct *);
static void moxa_hangup(struct tty_struct *);
static void MoxaPortDisable(int);
static long MoxaPortGetMaxBaud(int);
static long MoxaPortSetBaud(int, long);
-static int MoxaPortSetTermio(int, struct termios *, speed_t);
+static int MoxaPortSetTermio(int, struct ktermios *, speed_t);
static int MoxaPortGetLineOut(int, int *, int *);
static void MoxaPortLineCtrl(int, int, int);
static void MoxaPortFlowCtrl(int, int, int, int, int, int);
moxaDriver->init_termios.c_oflag = 0;
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
moxaDriver->init_termios.c_lflag = 0;
+ moxaDriver->init_termios.c_ispeed = 9600;
+ moxaDriver->init_termios.c_ospeed = 9600;
moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
}
static void moxa_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
static void set_tty_param(struct tty_struct *tty)
{
- register struct termios *ts;
+ register struct ktermios *ts;
struct moxa_str *ch;
int rts, cts, txflow, rxflow, xany;
static void receive_data(struct moxa_str *ch)
{
struct tty_struct *tp;
- struct termios *ts;
+ struct ktermios *ts;
unsigned long flags;
ts = NULL;
*
* Function 12: Configure the port.
* Syntax:
- * int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud);
+ * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
* int port : port number (0 - 127)
- * struct termios * termio : termio structure pointer
+ * struct ktermios * termio : termio structure pointer
* speed_t baud : baud rate
*
* return: -1 : this port is invalid or termio == NULL
return (baud);
}
-int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud)
+int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
{
void __iomem *ofsAddr;
tcflag_t cflag;
int xmit_tail;
int xmit_cnt;
struct work_struct tqueue;
- struct termios normal_termios;
- struct termios callout_termios;
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
wait_queue_head_t delta_msr_wait;
static struct tty_driver *mxvar_sdriver;
static struct mxser_struct mxvar_table[MXSER_PORTS];
static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
-static struct termios *mxvar_termios[MXSER_PORTS + 1];
-static struct termios *mxvar_termios_locked[MXSER_PORTS + 1];
+static struct ktermios *mxvar_termios[MXSER_PORTS + 1];
+static struct ktermios *mxvar_termios_locked[MXSER_PORTS + 1];
static struct mxser_log mxvar_log;
static int mxvar_diagflag;
static unsigned char mxser_msr[MXSER_PORTS + 1];
static int mxser_ioctl_special(unsigned int, void __user *);
static void mxser_throttle(struct tty_struct *);
static void mxser_unthrottle(struct tty_struct *);
-static void mxser_set_termios(struct tty_struct *, struct termios *);
+static void mxser_set_termios(struct tty_struct *, struct ktermios *);
static void mxser_stop(struct tty_struct *);
static void mxser_start(struct tty_struct *);
static void mxser_hangup(struct tty_struct *);
static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
static int mxser_startup(struct mxser_struct *);
static void mxser_shutdown(struct mxser_struct *);
-static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios);
+static int mxser_change_speed(struct mxser_struct *, struct ktermios *old_termios);
static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *);
static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *);
static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *);
mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
mxvar_sdriver->init_termios = tty_std_termios;
mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
+ mxvar_sdriver->init_termios.c_ispeed = 9600;
+ mxvar_sdriver->init_termios.c_ospeed = 9600;
mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(mxvar_sdriver, &mxser_ops);
mxvar_sdriver->ttys = mxvar_tty;
/* MX_UNLOCK(&info->slock); */
}
-static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mxser_struct *info = tty->driver_data;
unsigned long flags;
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios)
+static int mxser_change_speed(struct mxser_struct *info, struct ktermios *old_termios)
{
unsigned cflag, cval, fcr;
int ret = 0;
int xmit_tail;
int xmit_cnt;
- struct termios normal_termios;
- struct termios callout_termios;
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
struct mxser_mon mon_data;
* the specified baud rate for a serial port.
*/
static int mxser_change_speed(struct mxser_port *info,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
unsigned cflag, cval, fcr;
int ret = 0;
spin_unlock_irqrestore(&info->slock, flags);
}
-static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mxser_port *info = tty->driver_data;
unsigned long flags;
const unsigned char * buf, size_t nr);
static int r3964_ioctl(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg);
-static void r3964_set_termios(struct tty_struct *tty, struct termios * old);
+static void r3964_set_termios(struct tty_struct *tty, struct ktermios * old);
static unsigned int r3964_poll(struct tty_struct * tty, struct file * file,
struct poll_table_struct *wait);
static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp,
}
}
-static void r3964_set_termios(struct tty_struct *tty, struct termios * old)
+static void r3964_set_termios(struct tty_struct *tty, struct ktermios * old)
{
TRACE_L("set_termios");
}
* when the ldisc is closed.
*/
-static void n_tty_set_termios(struct tty_struct *tty, struct termios * old)
+static void n_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
{
if (!tty)
return;
* tty pointer to tty structure
* termios pointer to buffer to hold returned old termios
*/
-static void mgslpc_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
return retval;
}
-static void pty_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
tty->termios->c_cflag &= ~(CSIZE | PARENB);
tty->termios->c_cflag |= (CS8 | CREAD);
pty_driver->init_termios.c_oflag = 0;
pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_driver->init_termios.c_lflag = 0;
+ pty_driver->init_termios.c_ispeed = 38400;
+ pty_driver->init_termios.c_ospeed = 38400;
pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &pty_ops);
pty_slave_driver->subtype = PTY_TYPE_SLAVE;
pty_slave_driver->init_termios = tty_std_termios;
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+ pty_slave_driver->init_termios.c_ispeed = 38400;
+ pty_slave_driver->init_termios.c_ospeed = 38400;
pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
ptm_driver->init_termios.c_oflag = 0;
ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
ptm_driver->init_termios.c_lflag = 0;
+ ptm_driver->init_termios.c_ispeed = 38400;
+ ptm_driver->init_termios.c_ospeed = 38400;
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
pts_driver->subtype = PTY_TYPE_SLAVE;
pts_driver->init_termios = tty_std_termios;
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+ pts_driver->init_termios.c_ispeed = 38400;
+ pts_driver->init_termios.c_ospeed = 38400;
pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
wake_up_interruptible(&port->open_wait);
}
-static void rc_set_termios(struct tty_struct * tty, struct termios * old_termios)
+static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
unsigned long flags;
riscom_driver->init_termios = tty_std_termios;
riscom_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ riscom_driver->init_termios.c_ispeed = 9600;
+ riscom_driver->init_termios.c_ospeed = 9600;
riscom_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(riscom_driver, &riscom_ops);
if ((error = tty_register_driver(riscom_driver))) {
* user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
*/
static void configure_r_port(struct r_port *info,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
unsigned cflag;
unsigned long flags;
}
static void rp_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct r_port *info = (struct r_port *) tty->driver_data;
CHANNEL_t *cp;
int count = 0;
/* Work through the PCI device list, pulling out ours */
- while ((dev = pci_find_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
+ while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
if (register_PCI(count + boards_found, dev))
count++;
}
rocket_driver->init_termios = tty_std_termios;
rocket_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ rocket_driver->init_termios.c_ispeed = 9600;
+ rocket_driver->init_termios.c_ospeed = 9600;
#ifdef ROCKET_SOFT_FLOW
rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
#endif
a2232_driver->init_termios = tty_std_termios;
a2232_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ a2232_driver->init_termios.c_ispeed = 9600;
+ a2232_driver->init_termios.c_ospeed = 9600;
a2232_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(a2232_driver, &a2232_ops);
if ((error = tty_register_driver(a2232_driver))) {
static void
-cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
+cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
}
-static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios)
+static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
specialix_driver->init_termios = tty_std_termios;
specialix_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ specialix_driver->init_termios.c_ispeed = 9600;
+ specialix_driver->init_termios.c_ospeed = 9600;
specialix_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(specialix_driver, &sx_ops);
i++;
continue;
}
- pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
+ pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
PCI_DEVICE_ID_SPECIALIX_IO8,
pdev);
if (!pdev) break;
if (!sx_probe(&sx_board[i]))
found ++;
}
+ /* May exit pci_get sequence early with lots of boards */
+ if (pdev != NULL)
+ pci_dev_put(pdev);
}
#endif
* with this termios initially. Basically all it defines is a raw port
* at 9600, 8 data bits, 1 stop bit.
*/
-static struct termios stl_deftermios = {
+static struct ktermios stl_deftermios = {
.c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
.c_cc = INIT_C_CC,
+ .c_ispeed = 9600,
+ .c_ospeed = 9600,
};
/*
static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value);
static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void stl_cd1400setport(struct stlport *portp, struct termios *tiosp);
+static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp);
static int stl_cd1400getsignals(struct stlport *portp);
static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts);
static void stl_cd1400ccrwait(struct stlport *portp);
static int stl_sc26198getglobreg(struct stlport *portp, int regnr);
static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void stl_sc26198setport(struct stlport *portp, struct termios *tiosp);
+static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp);
static int stl_sc26198getsignals(struct stlport *portp);
static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts);
static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx);
typedef struct uart {
int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp);
void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
- void (*setport)(struct stlport *portp, struct termios *tiosp);
+ void (*setport)(struct stlport *portp, struct ktermios *tiosp);
int (*getsignals)(struct stlport *portp);
void (*setsignals)(struct stlport *portp, int dtr, int rts);
void (*enablerxtx)(struct stlport *portp, int rx, int tx);
/*****************************************************************************/
-static void stl_settermios(struct tty_struct *tty, struct termios *old)
+static void stl_settermios(struct tty_struct *tty, struct ktermios *old)
{
struct stlport *portp;
- struct termios *tiosp;
+ struct ktermios *tiosp;
pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
pr_debug("stl_findpcibrds()\n");
for (i = 0; (i < stl_nrpcibrds); i++)
- while ((dev = pci_find_device(stl_pcibrds[i].vendid,
+ while ((dev = pci_get_device(stl_pcibrds[i].vendid,
stl_pcibrds[i].devid, dev))) {
/*
* settings.
*/
-static void stl_cd1400setport(struct stlport *portp, struct termios *tiosp)
+static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp)
{
struct stlbrd *brdp;
unsigned long flags;
* settings.
*/
-static void stl_sc26198setport(struct stlport *portp, struct termios *tiosp)
+static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp)
{
struct stlbrd *brdp;
unsigned long flags;
sx_driver->init_termios = tty_std_termios;
sx_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ sx_driver->init_termios.c_ispeed = 9600;
+ sx_driver->init_termios.c_ospeed = 9600;
sx_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(sx_driver, &sx_ops);
*
* Return Value: None
*/
-static void mgsl_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
unsigned long flags;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &mgsl_ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
wake_up_interruptible(&info->open_wait);
}
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct slgt_info *info = tty->driver_data;
unsigned long flags;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
/* Set new termios settings
*/
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
- tmp.sg_ispeed = tty->c_ispeed;
- tmp.sg_ospeed = tty->c_ospeed;
+ tmp.sg_ispeed = tty->termios->c_ispeed;
+ tmp.sg_ospeed = tty->termios->c_ospeed;
tmp.sg_erase = tty->termios->c_cc[VERASE];
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
scc_driver->init_termios = tty_std_termios;
scc_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ scc_driver->init_termios.c_ispeed = 9600;
+ scc_driver->init_termios.c_ospeed = 9600;
scc_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(scc_driver, &scc_ops);
return error;
}
-static void capinc_tty_set_termios(struct tty_struct *tty, struct termios * old)
+static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
{
#ifdef _DEBUG_TTYFUNCS
printk(KERN_DEBUG "capinc_tty_set_termios\n");
static int if_chars_in_buffer(struct tty_struct *tty);
static void if_throttle(struct tty_struct *tty);
static void if_unthrottle(struct tty_struct *tty);
-static void if_set_termios(struct tty_struct *tty, struct termios *old);
+static void if_set_termios(struct tty_struct *tty, struct ktermios *old);
static int if_tiocmget(struct tty_struct *tty, struct file *file);
static int if_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
mutex_unlock(&cs->mutex);
}
-static void if_set_termios(struct tty_struct *tty, struct termios *old)
+static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct cardstate *cs;
unsigned int iflag;
}
static void
-isdn_tty_set_termios(struct tty_struct *tty, struct termios *old_termios)
+isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
modem_info *info = (modem_info *) tty->driver_data;
{
struct sirtty_cb *priv = dev->priv;
struct tty_struct *tty;
- struct termios old_termios;
+ struct ktermios old_termios;
int cflag;
IRDA_ASSERT(priv != NULL, return -1;);
static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
{
- struct termios old_termios;
+ struct ktermios old_termios;
int cflag;
lock_kernel();
struct tty_driver *sclp_tty_driver;
-extern struct termios tty_std_termios;
-
static struct sclp_ioctls sclp_ioctls;
static struct sclp_ioctls sclp_ioctls_init =
{
* Check for visible/invisible input switches
*/
static void
-tty3270_set_termios(struct tty_struct *tty, struct termios *old)
+tty3270_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct tty3270 *tp;
int new;
}
static void
-serial21285_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned long flags;
unsigned int baud, quot, h_lcr;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
/* FIX UP modem control here someday......
*/
-static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
}
static void
-serial8250_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
}
static void
-pl010_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl010_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
}
static void
-pl011_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
/*
* Change the port parameters
*/
-static void atmel_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
}
static void
-clps711xuart_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int ubrlcr, baud, quot;
unsigned long flags;
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct termios *serial_termios[NR_PORTS];
-static struct termios *serial_termios_locked[NR_PORTS];
+static struct ktermios *serial_termios[NR_PORTS];
+static struct ktermios *serial_termios_locked[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
}
static void
-rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
driver->init_termios = tty_std_termios;
driver->init_termios.c_cflag =
B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+ driver->init_termios.c_ispeed = 115200;
+ driver->init_termios.c_ospeed = 115200;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
driver->termios = serial_termios;
driver->termios_locked = serial_termios_locked;
struct work_struct work;
struct async_icount icount; /* error-statistics etc.*/
- struct termios normal_termios;
- struct termios callout_termios;
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
#ifdef DECLARE_WAITQUEUE
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
spin_unlock_irqrestore(&uport->lock, flags);
}
-static void dz_set_termios(struct uart_port *uport, struct termios *termios,
- struct termios *old_termios)
+static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
+ struct ktermios *old_termios)
{
struct dz_port *dport = (struct dz_port *)uport;
unsigned long flags;
}
static void icom_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old_termios)
+ struct ktermios *termios,
+ struct ktermios *old_termios)
{
int baud;
unsigned cflag, iflag;
}
static void
-imx_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+imx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
*/
static void
ioc3_change_speed(struct uart_port *the_port,
- struct termios *new_termios, struct termios *old_termios)
+ struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc3_port *port = get_ioc3_port(the_port);
unsigned int cflag;
*/
static void
ic3_set_termios(struct uart_port *the_port,
- struct termios *termios, struct termios *old_termios)
+ struct ktermios *termios, struct ktermios *old_termios)
{
unsigned long port_flags;
*/
static void
ioc4_change_speed(struct uart_port *the_port,
- struct termios *new_termios, struct termios *old_termios)
+ struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);
int baud, bits;
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
+ ioc4_change_speed(the_port, info->tty->termios, (struct ktermios *)0);
return 0;
}
*/
static void
ic4_set_termios(struct uart_port *the_port,
- struct termios *termios, struct termios *old_termios)
+ struct ktermios *termios, struct ktermios *old_termios)
{
unsigned long port_flags;
/* The port lock is not held. */
static void
-ip22zilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
unsigned long flags;
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
- struct termios *termios;
+ struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
termios = port->info->tty->termios;
struct jsm_board *brd;
int rc = 0;
struct jsm_channel *channel = (struct jsm_channel *)port;
- struct termios *termios;
+ struct ktermios *termios;
/* Get board pointer from our array of majors we have allocated */
brd = channel->ch_bd;
static void jsm_tty_close(struct uart_port *port)
{
struct jsm_board *bd;
- struct termios *ts;
+ struct ktermios *ts;
struct jsm_channel *channel = (struct jsm_channel *)port;
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
}
static void jsm_tty_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old_termios)
+ struct ktermios *termios,
+ struct ktermios *old_termios)
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
}
static void m32r_sio_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
+ struct ktermios *termios, struct ktermios *old)
{
struct uart_sio_port *up = (struct uart_sio_port *)port;
unsigned char cval = 0;
return 0;
}
-static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
}
static void
-mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
+mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
}
static void
-mpsc_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+mpsc_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 baud;
* The Serial Mux does not support this function.
*/
static void
-mux_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+mux_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
}
}
static void
-netx_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+netx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud, quot;
unsigned char old_cr;
}
-static void __pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long baud;
if (ZS_IS_ASLEEP(uap))
return;
- memcpy(&uap->termios_cache, termios, sizeof(struct termios));
+ memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
* on the IR dongle. Note that the IRTTY driver currently doesn't know
}
/* The port lock is not held. */
-static void pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long flags;
volatile struct dbdma_regs __iomem *tx_dma_regs;
volatile struct dbdma_regs __iomem *rx_dma_regs;
- struct termios termios_cache;
+ struct ktermios termios_cache;
};
#define to_pmz(p) ((struct uart_pmac_port *)(p))
}
static void
-serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned char cval, fcr = 0;
}
static void s3c24xx_serial_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old)
+ struct ktermios *termios,
+ struct ktermios *old)
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
}
static void
-sa1100_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct sa1100_port *sport = (struct sa1100_port *)port;
unsigned long flags;
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct termios *old_termios);
+static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
* we're actually going to be using.
*/
unsigned int
-uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min, unsigned int max)
+uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
upf_t flags = port->flags & UPF_SPD_MASK;
EXPORT_SYMBOL(uart_get_divisor);
static void
-uart_change_speed(struct uart_state *state, struct termios *old_termios)
+uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
struct tty_struct *tty = state->info->tty;
struct uart_port *port = state->port;
- struct termios *termios;
+ struct ktermios *termios;
/*
* If we have no tty, termios, or the port does not exist,
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
- struct termios termios;
+ struct ktermios termios;
int i;
/*
spin_lock_init(&port->lock);
lockdep_set_class(&port->lock, &port_lock_key);
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = CREAD | HUPCL | CLOCAL;
* Re-enable the console device after suspending.
*/
if (uart_console(port)) {
- struct termios termios;
+ struct ktermios termios;
/*
* First try to use the console cflag setting.
*/
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = port->cons->cflag;
/*
normal->subtype = SERIAL_TYPE_NORMAL;
normal->init_termios = tty_std_termios;
normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
normal->driver_state = drv;
tty_set_operations(normal, &uart_ops);
}
static void lh7a40xuart_set_termios (struct uart_port* port,
- struct termios* termios,
- struct termios* old)
+ struct ktermios* termios,
+ struct ktermios* old)
{
unsigned int con;
unsigned int inten;
}
static void
-serial_txx9_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
unsigned int cval, fcr = 0;
s->disable(port);
}
-static void sci_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
*
*/
static void
-snp_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+snp_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
}
}
/* port->lock is not held. */
-static void sunhv_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
unsigned int quot = uart_get_divisor(port, baud);
}
/* port->lock is not held. */
-static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
unsigned long flags;
}
static void
-sunsu_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud, quot;
/* The port lock is not held. */
static void
-sunzilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
unsigned long flags;
free_irq(port->irq, port);
}
-static void ulite_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned long flags;
unsigned int baud;
}
static void
-v850e_uart_set_termios (struct uart_port *port, struct termios *termios,
- struct termios *old)
+v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned cflags = termios->c_cflag;
free_irq(port->irq, port);
}
-static void siu_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
+static void siu_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
{
tcflag_t c_cflag, c_iflag;
uint8_t lcr, fcr, ier;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct dec_serial *info = (struct dec_serial *)tty->driver_data;
int was_stopped;
5, 6, 7, 8
};
-static void acm_tty_set_termios(struct tty_struct *tty, struct termios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
{
struct acm *acm = tty->driver_data;
- struct termios *termios = tty->termios;
+ struct ktermios *termios = tty->termios;
struct usb_cdc_line_coding newline;
int newctrl = acm->ctrlout;
static void gs_break(struct tty_struct *tty, int break_state);
static int gs_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
-static void gs_set_termios(struct tty_struct *tty, struct termios *old);
+static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
static int gs_send(struct gs_dev *dev);
static int gs_send_packet(struct gs_dev *dev, char *packet,
/*
* gs_set_termios
*/
-static void gs_set_termios(struct tty_struct *tty, struct termios *old)
+static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
{
}
}
static void ark3116_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
static int ark3116_open(struct usb_serial_port *port, struct file *filp)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
char *buf;
int result = 0;
static int belkin_sa_open (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_read_int_callback (struct urb *urb);
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios * old);
+static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void belkin_sa_break_ctl (struct usb_serial_port *port, int break_state );
static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file);
__FUNCTION__, retval);
}
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct belkin_sa_private *priv = usb_get_serial_port_data(port);
struct usb_serial_port *port;
int retval = 0;
struct tty_struct *tty;
- struct termios *termios;
+ struct ktermios *termios;
dbg ("%s", __FUNCTION__);
static void cp2101_cleanup(struct usb_serial_port*);
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
-static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static void cp2101_set_termios(struct usb_serial_port*, struct ktermios*);
static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
unsigned int, unsigned int);
}
static void cp2101_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
unsigned int cflag, old_cflag=0;
int baud=0, bits;
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
- struct termios tmp_termios; /* stores the old termios settings */
+ struct ktermios tmp_termios; /* stores the old termios settings */
};
/* write buffer structure */
static void cypress_send (struct usb_serial_port *port);
static int cypress_write_room (struct usb_serial_port *port);
static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios (struct usb_serial_port *port, struct termios * old);
+static void cypress_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int cypress_tiocmget (struct usb_serial_port *port, struct file *file);
static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer (struct usb_serial_port *port);
switch (cmd) {
case TIOCGSERIAL:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
+ if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
return -EFAULT;
}
return (0);
break;
case TIOCSSERIAL:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
+ if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
return -EFAULT;
}
/* here we need to call cypress_set_termios to invoke the new settings */
static void cypress_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
static void digi_rx_throttle (struct usb_serial_port *port);
static void digi_rx_unthrottle (struct usb_serial_port *port);
static void digi_set_termios( struct usb_serial_port *port,
- struct termios *old_termios );
+ struct ktermios *old_termios );
static void digi_break_ctl( struct usb_serial_port *port, int break_state );
static int digi_ioctl( struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg );
static void digi_set_termios( struct usb_serial_port *port,
- struct termios *old_termios )
+ struct ktermios *old_termios )
{
struct digi_port *priv = usb_get_serial_port_data(port);
int ret;
unsigned char buf[32];
struct digi_port *priv = usb_get_serial_port_data(port);
- struct termios not_termios;
+ struct ktermios not_termios;
unsigned long flags = 0;
struct file * file,
unsigned int cmd,
unsigned long arg);
-static void empeg_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void empeg_write_bulk_callback (struct urb *urb);
static void empeg_read_bulk_callback (struct urb *urb);
}
-static void empeg_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
dbg("%s - port %d", __FUNCTION__, port->number);
static void ftdi_write_bulk_callback (struct urb *urb);
static void ftdi_read_bulk_callback (struct urb *urb);
static void ftdi_process_read (struct work_struct *work);
-static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
+static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
* WARNING: set_termios calls this with old_termios in kernel space
*/
-static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{ /* ftdi_termios */
struct usb_device *dev = port->serial->dev;
unsigned int cflag = port->tty->termios->c_cflag;
static int edge_chars_in_buffer (struct usb_serial_port *port);
static void edge_throttle (struct usb_serial_port *port);
static void edge_unthrottle (struct usb_serial_port *port);
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
static void edge_break (struct usb_serial_port *port, int break_state);
static int edge_tiocmget (struct usb_serial_port *port, struct file *file);
static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param);
static int calc_baud_rate_divisor (int baud_rate, int *divisor);
static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios);
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios);
static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
* SerialSetTermios
* this function is called by the tty driver when it wants to change the termios structure
*****************************************************************************/
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
#ifndef CMSPAR
#define CMSPAR 0
#endif
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios)
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
{
struct tty_struct *tty;
int baud;
static void stop_read(struct edgeport_port *edge_port);
static int restart_read(struct edgeport_port *edge_port);
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void edge_send(struct usb_serial_port *port);
/* circular buffer */
return status;
}
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios)
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
{
struct ump_uart_config *config;
struct tty_struct *tty;
return;
}
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static void ir_write_bulk_callback (struct urb *urb);
static void ir_read_bulk_callback (struct urb *urb);
-static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static u8 ir_baud = 0;
static u8 ir_xbof = 0;
return;
}
-static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned char *transfer_buffer;
unsigned int cflag;
static void keyspan_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int baud_rate, device_port;
struct keyspan_port_private *p_priv;
unsigned int cmd,
unsigned long arg);
static void keyspan_set_termios (struct usb_serial_port *port,
- struct termios *old);
+ struct ktermios *old);
static void keyspan_break_ctl (struct usb_serial_port *port,
int break_state);
static int keyspan_tiocmget (struct usb_serial_port *port,
static void keyspan_pda_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
unsigned int cflag = port->tty->termios->c_cflag;
static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios * old);
+ struct ktermios *old);
static int klsi_105_ioctl (struct usb_serial_port *port,
struct file * file,
unsigned int cmd,
#define URB_TRANSFER_BUFFER_SIZE 64
struct klsi_105_private {
struct klsi_105_port_settings cfg;
- struct termios termios;
+ struct ktermios termios;
unsigned long line_state; /* modem line settings */
/* write pool */
struct urb * write_urb_pool[NUM_URBS];
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
unsigned int iflag = port->tty->termios->c_iflag;
int cur_pos; // index of the next char to send in buf
__u16 device_type;
int line_state;
- struct termios internal_termios;
+ struct ktermios internal_termios;
};
switch (cmd) {
case TCGETS: // 0x5401
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios))) {
+ if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
return -EFAULT;
}
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
+ if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
&priv->internal_termios))
return -EFAULT;
return 0;
dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
return -ENOTTY;
}
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios))) {
+ if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
return -EFAULT;
}
if (user_termios_to_kernel_termios(&priv->internal_termios,
- (struct termios __user *)arg))
+ (struct ktermios __user *)arg))
return -EFAULT;
settings = kzalloc(50, GFP_KERNEL);
struct file *filp);
static void mct_u232_read_int_callback (struct urb *urb);
static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios * old);
+ struct ktermios * old);
static int mct_u232_ioctl (struct usb_serial_port *port,
struct file * file,
unsigned int cmd,
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
* the specified new settings.
*/
static void change_port_settings(struct moschip_port *mos7720_port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial_port *port;
struct usb_serial *serial;
* termios structure.
*/
static void mos7720_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int status;
unsigned int cflag;
*****************************************************************************/
static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct tty_struct *tty;
int baud;
*****************************************************************************/
static void mos7840_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int status;
unsigned int cflag;
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void option_set_termios(struct usb_serial_port *port,
- struct termios *old);
+ struct ktermios *old);
static void option_break_ctl(struct usb_serial_port *port, int break_state);
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
}
static void option_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
}
static void pl2303_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
static int pl2303_open(struct usb_serial_port *port, struct file *filp)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
}
static void sierra_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
static void ti_unthrottle(struct usb_serial_port *port);
static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
static void ti_set_termios(struct usb_serial_port *port,
- struct termios *old_termios);
+ struct ktermios *old_termios);
static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static void ti_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct ti_port *tport = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
return retval;
}
-static void serial_set_termios (struct tty_struct *tty, struct termios * old)
+static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
{
struct usb_serial_port *port = tty->driver_data;
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_shutdown (struct usb_serial *serial);
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb);
static void visor_read_int_callback (struct urb *urb);
/* This function is all nice and good, but we don't change anything based on it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag;
static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static int whiteheat_write_room (struct usb_serial_port *port);
static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios (struct usb_serial_port *port, struct termios * old);
+static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file);
static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state);
static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
{
int retval = 0;
- struct termios old_term;
+ struct ktermios old_term;
dbg("%s - port %d", __FUNCTION__, port->number);
}
-static void whiteheat_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
dbg("%s -port %d", __FUNCTION__, port->number);
/*
* Translate a "termio" structure into a "termios". Ugh.
*/
-static inline int user_termio_to_kernel_termios(struct termios *termios,
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
struct termio __user *termio)
{
unsigned short tmp;
* Translate a "termios" structure into a "termio". Ugh.
*/
static inline int kernel_termios_to_user_termio(struct termio __user *termio,
- struct termios *termios)
+ struct ktermios *termios)
{
if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
tcflag_t c_oflag; /* output mode flags */
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
};
int gs_block_til_ready(void *port, struct file *filp);
void gs_close(struct tty_struct *tty, struct file *filp);
void gs_set_termios (struct tty_struct * tty,
- struct termios * old_termios);
+ struct ktermios * old_termios);
int gs_init_port(struct gs_port *port);
int gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
int gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
#endif
struct tty_struct *tty; /* Pointer to corresponding tty */
atemu emu; /* AT-emulator data */
- struct termios normal_termios; /* For saving termios structs */
- struct termios callout_termios;
+ struct ktermios normal_termios; /* For saving termios structs */
+ struct ktermios callout_termios;
wait_queue_head_t open_wait, close_wait;
struct semaphore write_sem;
spinlock_t readlock;
int refcount; /* Number of opens */
struct tty_driver *tty_modem; /* tty-device */
struct tty_struct *modem_table[ISDN_MAX_CHANNELS]; /* ?? copied from Orig */
- struct termios *modem_termios[ISDN_MAX_CHANNELS];
- struct termios *modem_termios_locked[ISDN_MAX_CHANNELS];
+ struct ktermios *modem_termios[ISDN_MAX_CHANNELS];
+ struct ktermios *modem_termios_locked[ISDN_MAX_CHANNELS];
modem_info info[ISDN_MAX_CHANNELS]; /* Private data */
} isdn_modem_t;
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
- void (*set_termios)(struct uart_port *, struct termios *new,
- struct termios *old);
+ void (*set_termios)(struct uart_port *, struct ktermios *new,
+ struct ktermios *old);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
*/
void uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int baud);
-unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min,
+unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min,
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count);
int (*write_room) (struct usb_serial_port *port);
int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
- void (*set_termios) (struct usb_serial_port *port, struct termios * old);
+ void (*set_termios) (struct usb_serial_port *port, struct ktermios * old);
void (*break_ctl) (struct usb_serial_port *port, int break_state);
int (*chars_in_buffer) (struct usb_serial_port *port);
void (*throttle) (struct usb_serial_port *port);
return -ENOIOCTLCMD;
}
-static void rfcomm_tty_set_termios(struct tty_struct *tty, struct termios *old)
+static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- struct termios *new = (struct termios *) tty->termios;
+ struct ktermios *new = tty->termios;
int old_baud_rate = tty_termios_baud_rate(old);
int new_baud_rate = tty_termios_baud_rate(new);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff