Blackfin: cm-bf537u: split board from cm-bf537e
authorHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Thu, 10 Sep 2009 15:12:08 +0000 (15:12 +0000)
committerMike Frysinger <vapier@gentoo.org>
Thu, 17 Sep 2009 02:10:45 +0000 (22:10 -0400)
The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
arch/blackfin/Kconfig
arch/blackfin/mach-bf537/boards/Kconfig
arch/blackfin/mach-bf537/boards/Makefile
arch/blackfin/mach-bf537/boards/cm_bf537.c [deleted file]
arch/blackfin/mach-bf537/boards/cm_bf537e.c [new file with mode: 0644]
arch/blackfin/mach-bf537/boards/cm_bf537u.c [new file with mode: 0644]

index f20dc775a226e08899a593a20d76146d6bd1f069..e7a781d21486587ef4b32defc2a23646bb84f5ea 100644 (file)
@@ -342,8 +342,9 @@ config MEM_MT48LC64M4A2FB_7E
 config MEM_MT48LC16M16A2TG_75
        bool
        depends on (BFIN533_EZKIT || BFIN561_EZKIT \
-               || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-               || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
+               || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
+               || BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
+               || BFIN527_BLUETECHNIX_CM)
        default y
 
 config MEM_MT48LC32M8A2_75
@@ -459,7 +460,7 @@ config VCO_MULT
        default "45" if BFIN533_STAMP
        default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
        default "22" if BFIN533_BLUETECHNIX_CM
-       default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
+       default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
        default "20" if BFIN561_EZKIT
        default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
        help
index 77c59da87e85d93f2d62478fff1f6a9cef4c19df..44132fda63bec3562056d25550e4c5caf0ffea1e 100644 (file)
@@ -9,11 +9,17 @@ config BFIN537_STAMP
        help
          BF537-STAMP board support.
 
-config BFIN537_BLUETECHNIX_CM
-       bool "Bluetechnix CM-BF537"
+config BFIN537_BLUETECHNIX_CM_E
+       bool "Bluetechnix CM-BF537E"
        depends on (BF537)
        help
-         CM-BF537 support for EVAL- and DEV-Board.
+         CM-BF537E support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM_U
+       bool "Bluetechnix CM-BF537U"
+       depends on (BF537)
+       help
+         CM-BF537U support for EVAL- and DEV-Board.
 
 config BFIN537_BLUETECHNIX_TCM
        bool "Bluetechnix TCM-BF537"
index 68b98a7af6a618dc642b9413ec0b7c613798bf84..7e6aa4e5b205f367b3ba30b50e11fe4d38c201e2 100644 (file)
@@ -3,7 +3,8 @@
 #
 
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
deleted file mode 100644 (file)
index 220cfda..0000000
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/ata_platform.h>
-#include <linux/irq.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "Bluetechnix CM BF537";
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-       {
-               .name = "bootloader(spi)",
-               .size = 0x00020000,
-               .offset = 0,
-               .mask_flags = MTD_CAP_ROM
-       }, {
-               .name = "linux kernel(spi)",
-               .size = 0xe0000,
-               .offset = 0x20000
-       }, {
-               .name = "file system(spi)",
-               .size = 0x700000,
-               .offset = 0x00100000,
-       }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-       .name = "m25p80",
-       .parts = bfin_spi_flash_partitions,
-       .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-       .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-       .enable_dma = 0,         /* use dma transfer with this chip*/
-       .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-       .enable_dma = 1,         /* use dma transfer with this chip*/
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 8,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
-       {
-               /* the modalias must be the same as spi device driver name */
-               .modalias = "m25p80", /* Name of spi_driver for this device */
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0, /* Framework bus number */
-               .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-               .platform_data = &bfin_spi_flash_data,
-               .controller_data = &spi_flash_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-       {
-               .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-               .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0, /* Framework bus number */
-               .chip_select = 1, /* Framework chip select. */
-               .platform_data = NULL, /* No spi_driver specific config */
-               .controller_data = &spi_adc_chip_info,
-       },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-       {
-               .modalias = "ad1836",
-               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-               .controller_data = &ad1836_spi_chip_info,
-       },
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-       {
-               .modalias = "mmc_spi",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 1,
-               .controller_data = &mmc_spi_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-       [0] = {
-               .start = SPI0_REGBASE,
-               .end   = SPI0_REGBASE + 0xFF,
-               .flags = IORESOURCE_MEM,
-               },
-       [1] = {
-               .start = CH_SPI,
-               .end   = CH_SPI,
-               .flags = IORESOURCE_DMA,
-       },
-       [2] = {
-               .start = IRQ_SPI,
-               .end   = IRQ_SPI,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-       .num_chipselect = 8,
-       .enable_dma = 1,  /* master has the ability to do dma transfer */
-       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bfin_spi0_device = {
-       .name = "bfin-spi",
-       .id = 0, /* Bus number */
-       .num_resources = ARRAY_SIZE(bfin_spi0_resource),
-       .resource = bfin_spi0_resource,
-       .dev = {
-               .platform_data = &bfin_spi0_info, /* Passed to driver */
-       },
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-       .name = "rtc-bfin",
-       .id   = -1,
-};
-#endif
-
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
-static struct platform_device hitachi_fb_device = {
-       .name = "hitachi-tx09",
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-       .leda = RPC_LED_100_10,
-       .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-       {
-               .start = 0x20200300,
-               .end = 0x20200300 + 16,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PF14,
-               .end = IRQ_PF14,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-               },
-};
-
-static struct platform_device smc91x_device = {
-       .name = "smc91x",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(smc91x_resources),
-       .resource = smc91x_resources,
-       .dev    = {
-               .platform_data  = &smc91x_info,
-       },
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-       {
-               .start = 0x20308000,
-               .end = 0x20308000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20308004,
-               .end = 0x20308004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PG15,
-               .end = IRQ_PG15,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-       .sel15Kres = 1,
-       .clknotstop = 0,
-       .oc_enable = 0,
-       .int_act_high = 0,
-       .int_edge_triggered = 0,
-       .remote_wakeup_connected = 0,
-       .no_power_switching = 1,
-       .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-       .name = "isp1362-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &isp1362_priv,
-       },
-       .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-       .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-       {
-               .start = 0x20200000,
-               .end = 0x20200000 + 0x100,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PH14,
-               .end = IRQ_PH14,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct platform_device net2272_bfin_device = {
-       .name = "net2272",
-       .id = -1,
-       .num_resources = ARRAY_SIZE(net2272_bfin_resources),
-       .resource = net2272_bfin_resources,
-};
-#endif
-
-static struct resource bfin_gpios_resources = {
-       .start = 0,
-       .end   = MAX_BLACKFIN_GPIOS - 1,
-       .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-       .name = "simple-gpio",
-       .id = -1,
-       .num_resources = 1,
-       .resource = &bfin_gpios_resources,
-};
-
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
-static struct mtd_partition cm_partitions[] = {
-       {
-               .name   = "bootloader(nor)",
-               .size   = 0x40000,
-               .offset = 0,
-       }, {
-               .name   = "linux kernel(nor)",
-               .size   = 0xE0000,
-               .offset = MTDPART_OFS_APPEND,
-       }, {
-               .name   = "file system(nor)",
-               .size   = MTDPART_SIZ_FULL,
-               .offset = MTDPART_OFS_APPEND,
-       }
-};
-
-static struct physmap_flash_data cm_flash_data = {
-       .width    = 2,
-       .parts    = cm_partitions,
-       .nr_parts = ARRAY_SIZE(cm_partitions),
-};
-
-static unsigned cm_flash_gpios[] = { GPIO_PF4 };
-
-static struct resource cm_flash_resource[] = {
-       {
-               .name  = "cfi_probe",
-               .start = 0x20000000,
-               .end   = 0x201fffff,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = (unsigned long)cm_flash_gpios,
-               .end   = ARRAY_SIZE(cm_flash_gpios),
-               .flags = IORESOURCE_IRQ,
-       }
-};
-
-static struct platform_device cm_flash_device = {
-       .name          = "gpio-addr-flash",
-       .id            = 0,
-       .dev = {
-               .platform_data = &cm_flash_data,
-       },
-       .num_resources = ARRAY_SIZE(cm_flash_resource),
-       .resource      = cm_flash_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
-               .flags = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device bfin_uart_device = {
-       .name = "bfin-uart",
-       .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_uart_resources),
-       .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART0_RX,
-               .end = IRQ_UART0_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART0_RX,
-               .end = CH_UART0_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-static struct platform_device bfin_sir0_device = {
-       .name = "bfin_sir",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-       .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-       {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART1_RX,
-               .end = IRQ_UART1_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART1_RX,
-               .end = CH_UART1_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-static struct platform_device bfin_sir1_device = {
-       .name = "bfin_sir",
-       .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_sir1_resources),
-       .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-       [0] = {
-               .start = TWI0_REGBASE,
-               .end   = TWI0_REGBASE,
-               .flags = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start = IRQ_TWI,
-               .end   = IRQ_TWI,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-       .name = "i2c-bfin-twi",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_twi0_resource),
-       .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-       .name = "bfin-sport-uart",
-       .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-       .name = "bfin-sport-uart",
-       .id = 1,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-       .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-       .name = "bfin_mac",
-       .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT       IRQ_PF14
-
-static struct pata_platform_info bfin_pata_platform_data = {
-       .ioport_shift = 2,
-       .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-       {
-               .start = 0x2030C000,
-               .end = 0x2030C01F,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = 0x2030D018,
-               .end = 0x2030D01B,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = PATA_INT,
-               .end = PATA_INT,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device bfin_pata_device = {
-       .name = "pata_platform",
-       .id = -1,
-       .num_resources = ARRAY_SIZE(bfin_pata_resources),
-       .resource = bfin_pata_resources,
-       .dev = {
-               .platform_data = &bfin_pata_platform_data,
-       }
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-       VRPAIR(VLEV_085, 250000000),
-       VRPAIR(VLEV_090, 376000000),
-       VRPAIR(VLEV_095, 426000000),
-       VRPAIR(VLEV_100, 426000000),
-       VRPAIR(VLEV_105, 476000000),
-       VRPAIR(VLEV_110, 476000000),
-       VRPAIR(VLEV_115, 476000000),
-       VRPAIR(VLEV_120, 500000000),
-       VRPAIR(VLEV_125, 533000000),
-       VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-       .tuple_tab = cclk_vlev_datasheet,
-       .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-       .vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-       .name = "bfin dpmc",
-       .dev = {
-               .platform_data = &bfin_dmpc_vreg_data,
-       },
-};
-
-static struct platform_device *cm_bf537_devices[] __initdata = {
-
-       &bfin_dpmc,
-
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
-       &hitachi_fb_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-       &rtc_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-       &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-       &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-       &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-       &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-       &bfin_sport0_uart_device,
-       &bfin_sport1_uart_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-       &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-       &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-       &bfin_mii_bus,
-       &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-       &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-       &bfin_pata_device,
-#endif
-
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
-       &cm_flash_device,
-#endif
-
-       &bfin_gpios_device,
-};
-
-static int __init cm_bf537_init(void)
-{
-       printk(KERN_INFO "%s(): registering device resources\n", __func__);
-       platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-       irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
-       return 0;
-}
-
-arch_initcall(cm_bf537_init);
-
-void bfin_get_ether_addr(char *addr)
-{
-       random_ether_addr(addr);
-       printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644 (file)
index 0000000..87acb7d
--- /dev/null
@@ -0,0 +1,727 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537E";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+       {
+               .name = "bootloader(spi)",
+               .size = 0x00020000,
+               .offset = 0,
+               .mask_flags = MTD_CAP_ROM
+       }, {
+               .name = "linux kernel(spi)",
+               .size = 0xe0000,
+               .offset = 0x20000
+       }, {
+               .name = "file system(spi)",
+               .size = 0x700000,
+               .offset = 0x00100000,
+       }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+       .name = "m25p80",
+       .parts = bfin_spi_flash_partitions,
+       .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+       .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+       .enable_dma = 0,         /* use dma transfer with this chip*/
+       .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+       .enable_dma = 1,         /* use dma transfer with this chip*/
+       .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+       {
+               /* the modalias must be the same as spi device driver name */
+               .modalias = "m25p80", /* Name of spi_driver for this device */
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0, /* Framework bus number */
+               .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+               .platform_data = &bfin_spi_flash_data,
+               .controller_data = &spi_flash_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+       {
+               .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+               .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0, /* Framework bus number */
+               .chip_select = 1, /* Framework chip select. */
+               .platform_data = NULL, /* No spi_driver specific config */
+               .controller_data = &spi_adc_chip_info,
+       },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+       {
+               .modalias = "ad1836",
+               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+               .controller_data = &ad1836_spi_chip_info,
+       },
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+       {
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = 1,
+               .controller_data = &mmc_spi_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+       [0] = {
+               .start = SPI0_REGBASE,
+               .end   = SPI0_REGBASE + 0xFF,
+               .flags = IORESOURCE_MEM,
+               },
+       [1] = {
+               .start = CH_SPI,
+               .end   = CH_SPI,
+               .flags = IORESOURCE_DMA,
+       },
+       [2] = {
+               .start = IRQ_SPI,
+               .end   = IRQ_SPI,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+       .num_chipselect = 8,
+       .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+       .name = "bfin-spi",
+       .id = 0, /* Bus number */
+       .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+       .resource = bfin_spi0_resource,
+       .dev = {
+               .platform_data = &bfin_spi0_info, /* Passed to driver */
+       },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+       .name = "rtc-bfin",
+       .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+       .name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+       {
+               .start = 0x20200300,
+               .end = 0x20200300 + 16,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PF14,
+               .end = IRQ_PF14,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+               },
+};
+
+static struct platform_device smc91x_device = {
+       .name = "smc91x",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(smc91x_resources),
+       .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+       {
+               .start = 0x20308000,
+               .end = 0x20308000,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = 0x20308004,
+               .end = 0x20308004,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PG15,
+               .end = IRQ_PG15,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+       },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+       .sel15Kres = 1,
+       .clknotstop = 0,
+       .oc_enable = 0,
+       .int_act_high = 0,
+       .int_edge_triggered = 0,
+       .remote_wakeup_connected = 0,
+       .no_power_switching = 1,
+       .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+       .name = "isp1362-hcd",
+       .id = 0,
+       .dev = {
+               .platform_data = &isp1362_priv,
+       },
+       .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+       .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+       {
+               .start = 0x20300000,
+               .end = 0x20300000 + 0x100,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PG13,
+               .end = IRQ_PG13,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+       },
+};
+
+static struct platform_device net2272_bfin_device = {
+       .name = "net2272",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+       .resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+       .start = 0,
+       .end   = MAX_BLACKFIN_GPIOS - 1,
+       .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+       .name = "simple-gpio",
+       .id = -1,
+       .num_resources = 1,
+       .resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+       {
+               .name   = "bootloader(nor)",
+               .size   = 0x40000,
+               .offset = 0,
+       }, {
+               .name   = "linux kernel(nor)",
+               .size   = 0x100000,
+               .offset = MTDPART_OFS_APPEND,
+       }, {
+               .name   = "file system(nor)",
+               .size   = MTDPART_SIZ_FULL,
+               .offset = MTDPART_OFS_APPEND,
+       }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+       .width    = 2,
+       .parts    = cm_partitions,
+       .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+       {
+               .name  = "cfi_probe",
+               .start = 0x20000000,
+               .end   = 0x201fffff,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = (unsigned long)cm_flash_gpios,
+               .end   = ARRAY_SIZE(cm_flash_gpios),
+               .flags = IORESOURCE_IRQ,
+       }
+};
+
+static struct platform_device cm_flash_device = {
+       .name          = "gpio-addr-flash",
+       .id            = 0,
+       .dev = {
+               .platform_data = &cm_flash_data,
+       },
+       .num_resources = ARRAY_SIZE(cm_flash_resource),
+       .resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+       {
+               .start = 0xFFC00400,
+               .end = 0xFFC004FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART0_RX,
+               .end = IRQ_UART0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART0_ERROR,
+               .end = IRQ_UART0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART0_TX,
+               .end = CH_UART0_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART0_RX,
+               .end = CH_UART0_RX,
+               .flags = IORESOURCE_DMA,
+       },
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+       {
+               /*
+                * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                */
+               .start = -1,
+               .end = -1,
+               .flags = IORESOURCE_IO,
+       },
+       {
+               /*
+                * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                */
+               .start = -1,
+               .end = -1,
+               .flags = IORESOURCE_IO,
+       },
+#endif
+};
+
+static struct platform_device bfin_uart0_device = {
+       .name = "bfin-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+       .resource = bfin_uart0_resources,
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+       {
+               .start = 0xFFC02000,
+               .end = 0xFFC020FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART1_RX,
+               .end = IRQ_UART1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART1_ERROR,
+               .end = IRQ_UART1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART1_TX,
+               .end = CH_UART1_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART1_RX,
+               .end = CH_UART1_RX,
+               .flags = IORESOURCE_DMA,
+       },
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+       {
+               /*
+                * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                */
+               .start = -1,
+               .end = -1,
+               .flags = IORESOURCE_IO,
+       },
+       {
+               /*
+                * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                */
+               .start = -1,
+               .end = -1,
+               .flags = IORESOURCE_IO,
+       },
+#endif
+};
+
+static struct platform_device bfin_uart1_device = {
+       .name = "bfin-uart",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+       .resource = bfin_uart1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+       {
+               .start = 0xFFC00400,
+               .end = 0xFFC004FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART0_RX,
+               .end = IRQ_UART0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART0_RX,
+               .end = CH_UART0_RX+1,
+               .flags = IORESOURCE_DMA,
+       },
+};
+static struct platform_device bfin_sir0_device = {
+       .name = "bfin_sir",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+       .resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+       {
+               .start = 0xFFC02000,
+               .end = 0xFFC020FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART1_RX,
+               .end = IRQ_UART1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART1_RX,
+               .end = CH_UART1_RX+1,
+               .flags = IORESOURCE_DMA,
+       },
+};
+static struct platform_device bfin_sir1_device = {
+       .name = "bfin_sir",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sir1_resources),
+       .resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+       [0] = {
+               .start = TWI0_REGBASE,
+               .end   = TWI0_REGBASE,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start = IRQ_TWI,
+               .end   = IRQ_TWI,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+       .name = "i2c-bfin-twi",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+       .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+       .name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+       .dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT       IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+       .ioport_shift = 2,
+       .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+       {
+               .start = 0x2030C000,
+               .end = 0x2030C01F,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = 0x2030D018,
+               .end = 0x2030D01B,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = PATA_INT,
+               .end = PATA_INT,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device bfin_pata_device = {
+       .name = "pata_platform",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(bfin_pata_resources),
+       .resource = bfin_pata_resources,
+       .dev = {
+               .platform_data = &bfin_pata_platform_data,
+       }
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+       VRPAIR(VLEV_085, 250000000),
+       VRPAIR(VLEV_090, 376000000),
+       VRPAIR(VLEV_095, 426000000),
+       VRPAIR(VLEV_100, 426000000),
+       VRPAIR(VLEV_105, 476000000),
+       VRPAIR(VLEV_110, 476000000),
+       VRPAIR(VLEV_115, 476000000),
+       VRPAIR(VLEV_120, 500000000),
+       VRPAIR(VLEV_125, 533000000),
+       VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+       .tuple_tab = cclk_vlev_datasheet,
+       .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+       .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+       .name = "bfin dpmc",
+       .dev = {
+               .platform_data = &bfin_dmpc_vreg_data,
+       },
+};
+
+static struct platform_device *cm_bf537e_devices[] __initdata = {
+
+       &bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+       &hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+       &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+       &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+       &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+       &bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+       &bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+       &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+       &bfin_sport0_uart_device,
+       &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+       &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+       &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+       &bfin_mii_bus,
+       &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+       &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+       &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+       &cm_flash_device,
+#endif
+
+       &bfin_gpios_device,
+};
+
+static int __init cm_bf537e_init(void)
+{
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
+       platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+       return 0;
+}
+
+arch_initcall(cm_bf537e_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+       random_ether_addr(addr);
+       printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
new file mode 100644 (file)
index 0000000..8219dc3
--- /dev/null
@@ -0,0 +1,633 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537U";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+       {
+               .name = "bootloader(spi)",
+               .size = 0x00020000,
+               .offset = 0,
+               .mask_flags = MTD_CAP_ROM
+       }, {
+               .name = "linux kernel(spi)",
+               .size = 0xe0000,
+               .offset = 0x20000
+       }, {
+               .name = "file system(spi)",
+               .size = 0x700000,
+               .offset = 0x00100000,
+       }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+       .name = "m25p80",
+       .parts = bfin_spi_flash_partitions,
+       .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+       .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+       .enable_dma = 0,         /* use dma transfer with this chip*/
+       .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+       .enable_dma = 1,         /* use dma transfer with this chip*/
+       .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+       {
+               /* the modalias must be the same as spi device driver name */
+               .modalias = "m25p80", /* Name of spi_driver for this device */
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0, /* Framework bus number */
+               .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+               .platform_data = &bfin_spi_flash_data,
+               .controller_data = &spi_flash_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+       {
+               .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+               .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0, /* Framework bus number */
+               .chip_select = 1, /* Framework chip select. */
+               .platform_data = NULL, /* No spi_driver specific config */
+               .controller_data = &spi_adc_chip_info,
+       },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+       {
+               .modalias = "ad1836",
+               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+               .controller_data = &ad1836_spi_chip_info,
+       },
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+       {
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = 1,
+               .controller_data = &mmc_spi_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+       [0] = {
+               .start = SPI0_REGBASE,
+               .end   = SPI0_REGBASE + 0xFF,
+               .flags = IORESOURCE_MEM,
+               },
+       [1] = {
+               .start = CH_SPI,
+               .end   = CH_SPI,
+               .flags = IORESOURCE_DMA,
+       },
+       [2] = {
+               .start = IRQ_SPI,
+               .end   = IRQ_SPI,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+       .num_chipselect = 8,
+       .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+       .name = "bfin-spi",
+       .id = 0, /* Bus number */
+       .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+       .resource = bfin_spi0_resource,
+       .dev = {
+               .platform_data = &bfin_spi0_info, /* Passed to driver */
+       },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+       .name = "rtc-bfin",
+       .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+       .name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+       {
+               .start = 0x20200300,
+               .end = 0x20200300 + 16,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PF14,
+               .end = IRQ_PF14,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+               },
+};
+
+static struct platform_device smc91x_device = {
+       .name = "smc91x",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(smc91x_resources),
+       .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+       {
+               .start = 0x20308000,
+               .end = 0x20308000,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = 0x20308004,
+               .end = 0x20308004,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PG15,
+               .end = IRQ_PG15,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+       },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+       .sel15Kres = 1,
+       .clknotstop = 0,
+       .oc_enable = 0,
+       .int_act_high = 0,
+       .int_edge_triggered = 0,
+       .remote_wakeup_connected = 0,
+       .no_power_switching = 1,
+       .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+       .name = "isp1362-hcd",
+       .id = 0,
+       .dev = {
+               .platform_data = &isp1362_priv,
+       },
+       .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+       .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+       {
+               .start = 0x20200000,
+               .end = 0x20200000 + 0x100,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = IRQ_PH14,
+               .end = IRQ_PH14,
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+       },
+};
+
+static struct platform_device net2272_bfin_device = {
+       .name = "net2272",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+       .resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+       .start = 0,
+       .end   = MAX_BLACKFIN_GPIOS - 1,
+       .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+       .name = "simple-gpio",
+       .id = -1,
+       .num_resources = 1,
+       .resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+       {
+               .name   = "bootloader(nor)",
+               .size   = 0x40000,
+               .offset = 0,
+       }, {
+               .name   = "linux kernel(nor)",
+               .size   = 0x100000,
+               .offset = MTDPART_OFS_APPEND,
+       }, {
+               .name   = "file system(nor)",
+               .size   = MTDPART_SIZ_FULL,
+               .offset = MTDPART_OFS_APPEND,
+       }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+       .width    = 2,
+       .parts    = cm_partitions,
+       .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH0 };
+
+static struct resource cm_flash_resource[] = {
+       {
+               .name  = "cfi_probe",
+               .start = 0x20000000,
+               .end   = 0x201fffff,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = (unsigned long)cm_flash_gpios,
+               .end   = ARRAY_SIZE(cm_flash_gpios),
+               .flags = IORESOURCE_IRQ,
+       }
+};
+
+static struct platform_device cm_flash_device = {
+       .name          = "gpio-addr-flash",
+       .id            = 0,
+       .dev = {
+               .platform_data = &cm_flash_data,
+       },
+       .num_resources = ARRAY_SIZE(cm_flash_resource),
+       .resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+       {
+               .start = 0xFFC00400,
+               .end = 0xFFC004FF,
+               .flags = IORESOURCE_MEM,
+       }, {
+               .start = 0xFFC02000,
+               .end = 0xFFC020FF,
+               .flags = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device bfin_uart_device = {
+       .name = "bfin-uart",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_uart_resources),
+       .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+       {
+               .start = 0xFFC00400,
+               .end = 0xFFC004FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART0_RX,
+               .end = IRQ_UART0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART0_RX,
+               .end = CH_UART0_RX+1,
+               .flags = IORESOURCE_DMA,
+       },
+};
+static struct platform_device bfin_sir0_device = {
+       .name = "bfin_sir",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+       .resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+       {
+               .start = 0xFFC02000,
+               .end = 0xFFC020FF,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_UART1_RX,
+               .end = IRQ_UART1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART1_RX,
+               .end = CH_UART1_RX+1,
+               .flags = IORESOURCE_DMA,
+       },
+};
+static struct platform_device bfin_sir1_device = {
+       .name = "bfin_sir",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sir1_resources),
+       .resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+       [0] = {
+               .start = TWI0_REGBASE,
+               .end   = TWI0_REGBASE,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start = IRQ_TWI,
+               .end   = IRQ_TWI,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+       .name = "i2c-bfin-twi",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+       .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+       .name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+       .dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT       IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+       .ioport_shift = 2,
+       .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+       {
+               .start = 0x2030C000,
+               .end = 0x2030C01F,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = 0x2030D018,
+               .end = 0x2030D01B,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = PATA_INT,
+               .end = PATA_INT,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device bfin_pata_device = {
+       .name = "pata_platform",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(bfin_pata_resources),
+       .resource = bfin_pata_resources,
+       .dev = {
+               .platform_data = &bfin_pata_platform_data,
+       }
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+       VRPAIR(VLEV_085, 250000000),
+       VRPAIR(VLEV_090, 376000000),
+       VRPAIR(VLEV_095, 426000000),
+       VRPAIR(VLEV_100, 426000000),
+       VRPAIR(VLEV_105, 476000000),
+       VRPAIR(VLEV_110, 476000000),
+       VRPAIR(VLEV_115, 476000000),
+       VRPAIR(VLEV_120, 500000000),
+       VRPAIR(VLEV_125, 533000000),
+       VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+       .tuple_tab = cclk_vlev_datasheet,
+       .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+       .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+       .name = "bfin dpmc",
+       .dev = {
+               .platform_data = &bfin_dmpc_vreg_data,
+       },
+};
+
+static struct platform_device *cm_bf537u_devices[] __initdata = {
+
+       &bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+       &hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+       &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+       &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+       &bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+       &bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+       &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+       &bfin_sport0_uart_device,
+       &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+       &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+       &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+       &bfin_mii_bus,
+       &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+       &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+       &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+       &cm_flash_device,
+#endif
+
+       &bfin_gpios_device,
+};
+
+static int __init cm_bf537u_init(void)
+{
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
+       platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+       return 0;
+}
+
+arch_initcall(cm_bf537u_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+       random_ether_addr(addr);
+       printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);