[PATCH] i810fb: Cleanup I2C code
authorAntonino A. Daplas <adaplas@gmail.com>
Mon, 7 Nov 2005 09:00:50 +0000 (01:00 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Mon, 7 Nov 2005 15:53:52 +0000 (07:53 -0800)
- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/video/i810/i810-i2c.c
drivers/video/i810/i810.h
drivers/video/i810/i810_main.c
drivers/video/i810/i810_regs.h

index 689d2586366d7ffafbdb7c55741580f6f858f277..c61bad0da20f942c46c537a7107f27074467f8f8 100644 (file)
@@ -46,92 +46,45 @@ static void i810i2c_setscl(void *data, int state)
         struct i810fb_par         *par = chan->par;
        u8                        __iomem *mmio = par->mmio_start_virtual;
 
-       i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
+       i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
                    SCL_DIR_MASK | SCL_VAL_MASK);
-       i810_readl(mmio, GPIOB);        /* flush posted write */
+       i810_readl(mmio, chan->ddc_base);       /* flush posted write */
 }
 
 static void i810i2c_setsda(void *data, int state)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
        u8                        __iomem *mmio = par->mmio_start_virtual;
 
-       i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
+       i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
                    SDA_DIR_MASK | SDA_VAL_MASK);
-       i810_readl(mmio, GPIOB);        /* flush posted write */
+       i810_readl(mmio, chan->ddc_base);       /* flush posted write */
 }
 
 static int i810i2c_getscl(void *data)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
        u8                        __iomem *mmio = par->mmio_start_virtual;
 
-       i810_writel(mmio, GPIOB, SCL_DIR_MASK);
-       i810_writel(mmio, GPIOB, 0);
-       return (0 != (i810_readl(mmio, GPIOB) & SCL_VAL_IN));
+       i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK);
+       i810_writel(mmio, chan->ddc_base, 0);
+       return ((i810_readl(mmio, chan->ddc_base) & SCL_VAL_IN) != 0);
 }
 
 static int i810i2c_getsda(void *data)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
        u8                        __iomem *mmio = par->mmio_start_virtual;
 
-       i810_writel(mmio, GPIOB, SDA_DIR_MASK);
-       i810_writel(mmio, GPIOB, 0);
-       return (0 != (i810_readl(mmio, GPIOB) & SDA_VAL_IN));
-}
-
-static void i810ddc_setscl(void *data, int state)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par       *par = chan->par;
-       u8                      __iomem *mmio = par->mmio_start_virtual;
-
-       i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
-                   SCL_DIR_MASK | SCL_VAL_MASK);
-       i810_readl(mmio, GPIOA);        /* flush posted write */
-}
-
-static void i810ddc_setsda(void *data, int state)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-       u8                      __iomem *mmio = par->mmio_start_virtual;
-
-       i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
-                   SDA_DIR_MASK | SDA_VAL_MASK);
-       i810_readl(mmio, GPIOA);        /* flush posted write */
-}
-
-static int i810ddc_getscl(void *data)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-       u8                      __iomem *mmio = par->mmio_start_virtual;
-
-       i810_writel(mmio, GPIOA, SCL_DIR_MASK);
-       i810_writel(mmio, GPIOA, 0);
-       return (0 != (i810_readl(mmio, GPIOA) & SCL_VAL_IN));
-}
-
-static int i810ddc_getsda(void *data)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-       u8                      __iomem *mmio = par->mmio_start_virtual;
-
-       i810_writel(mmio, GPIOA, SDA_DIR_MASK);
-       i810_writel(mmio, GPIOA, 0);
-       return (0 != (i810_readl(mmio, GPIOA) & SDA_VAL_IN));
+       i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK);
+       i810_writel(mmio, chan->ddc_base, 0);
+       return ((i810_readl(mmio, chan->ddc_base) & SDA_VAL_IN) != 0);
 }
 
-#define I2C_ALGO_DDC_I810   0x0e0000
-#define I2C_ALGO_I2C_I810   0x0f0000
-static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
-                             int conn)
+static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
 {
         int rc;
 
@@ -139,22 +92,11 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-       switch (conn) {
-       case 1:
-               chan->adapter.id                = I2C_ALGO_DDC_I810;
-               chan->algo.setsda               = i810ddc_setsda;
-               chan->algo.setscl               = i810ddc_setscl;
-               chan->algo.getsda               = i810ddc_getsda;
-               chan->algo.getscl               = i810ddc_getscl;
-               break;
-       case 2:
-               chan->adapter.id                = I2C_ALGO_I2C_I810;
-               chan->algo.setsda               = i810i2c_setsda;
-               chan->algo.setscl               = i810i2c_setscl;
-               chan->algo.getsda               = i810i2c_getsda;
-               chan->algo.getscl               = i810i2c_getscl;
-               break;
-       }
+       chan->adapter.id                = I2C_HW_B_I810;
+       chan->algo.setsda               = i810i2c_setsda;
+       chan->algo.setscl               = i810i2c_setscl;
+       chan->algo.getsda               = i810i2c_getsda;
+       chan->algo.getscl               = i810i2c_getscl;
        chan->algo.udelay               = 10;
        chan->algo.mdelay               = 10;
         chan->algo.timeout              = (HZ/2);
@@ -168,11 +110,15 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
         udelay(20);
 
         rc = i2c_bit_add_bus(&chan->adapter);
+
         if (rc == 0)
                 dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
-        else
+        else {
                 dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
                         "%s.\n", name);
+               chan->par = NULL;
+       }
+
         return rc;
 }
 
@@ -180,8 +126,14 @@ void i810_create_i2c_busses(struct i810fb_par *par)
 {
         par->chan[0].par        = par;
        par->chan[1].par        = par;
-       i810_setup_i2c_bus(&par->chan[0], "I810-DDC", 1);
-       i810_setup_i2c_bus(&par->chan[1], "I810-I2C", 2);
+       par->chan[2].par        = par;
+
+       par->chan[0].ddc_base = GPIOA;
+       i810_setup_i2c_bus(&par->chan[0], "I810-DDC");
+       par->chan[1].ddc_base = GPIOB;
+       i810_setup_i2c_bus(&par->chan[1], "I810-I2C");
+       par->chan[2].ddc_base = GPIOC;
+       i810_setup_i2c_bus(&par->chan[2], "I810-GPIOC");
 }
 
 void i810_delete_i2c_busses(struct i810fb_par *par)
@@ -189,9 +141,14 @@ void i810_delete_i2c_busses(struct i810fb_par *par)
         if (par->chan[0].par)
                 i2c_bit_del_bus(&par->chan[0].adapter);
         par->chan[0].par = NULL;
+
        if (par->chan[1].par)
                i2c_bit_del_bus(&par->chan[1].adapter);
        par->chan[1].par = NULL;
+
+       if (par->chan[2].par)
+               i2c_bit_del_bus(&par->chan[2].adapter);
+       par->chan[2].par = NULL;
 }
 
 static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
@@ -221,6 +178,7 @@ static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
                DPRINTK("i810-i2c: I2C Transfer successful\n");
                 return buf;
        }
+
         DPRINTK("i810-i2c: Unable to read EDID block.\n");
         kfree(buf);
         return NULL;
@@ -233,7 +191,7 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
         int i;
 
        DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
-       if (conn < 3) {
+       if (conn < 4) {
                for (i = 0; i < 3; i++) {
                        /* Do the real work */
                        edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
@@ -241,11 +199,14 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
                                break;
                }
        } else {
-               DPRINTK("i810-i2c: Getting EDID from BIOS\n");
-               edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
-               if (edid)
-                       memcpy(edid, fb_firmware_edid(info->device),
-                              EDID_LENGTH);
+               const u8 *e = fb_firmware_edid(info->device);
+
+               if (e != NULL) {
+                       DPRINTK("i810-i2c: Getting EDID from BIOS\n");
+                       edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+                       if (edid)
+                               memcpy(edid, e, EDID_LENGTH);
+               }
        }
 
         if (out_edid)
@@ -253,5 +214,3 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
 
         return (edid) ? 0 : 1;
 }
-
-
index d48949ceaacc033988512bb6eb4dabf3e942a0e3..6c187d5fe95170e337ccc09f86457d993d98e207 100644 (file)
@@ -249,6 +249,7 @@ struct i810fb_i2c_chan {
        struct i810fb_par *par;
        struct i2c_adapter adapter;
        struct i2c_algo_bit_data algo;
+       unsigned long ddc_base;
 };
 
 struct i810fb_par {
@@ -262,7 +263,7 @@ struct i810fb_par {
        struct heap_data         iring;
        struct heap_data         cursor_heap;
        struct vgastate          state;
-       struct i810fb_i2c_chan   chan[2];
+       struct i810fb_i2c_chan   chan[3];
        atomic_t                 use_count;
        u32 pseudo_palette[17];
        unsigned long mmio_start_phys;
index 0dbc9ddb6766e78eba0b1b58f5e5eb0c57d0051b..4175b2d8513c9649d6d9fff0c511eeebc709239a 100644 (file)
@@ -1854,7 +1854,7 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info)
 #ifdef CONFIG_FB_I810_I2C
        i810_create_i2c_busses(par);
 
-       for (i = 0; i < 3; i++) {
+       for (i = 0; i < 4; i++) {
                err = i810_probe_i2c_connector(info, &par->edid, i+1);
                if (!err)
                        break;
index 6e4b9afa4d9805cb050d2bae68643427b324a785..91c6bd9d0d0d472c7c43cb43d3b89fb18e816c5a 100644 (file)
@@ -70,6 +70,7 @@
 #define HVSYNC                0x05000 
 #define GPIOA                 0x05010
 #define GPIOB                 0x05014 
+#define GPIOC                 0x0501C
 
 /* Clock Control and Power Management Registers (06000h 06FFFh) */
 #define DCLK_0D               0x06000