drm/i915: fix sdvo hotplug support check and activation
authorJani Nikula <jani.nikula@intel.com>
Wed, 29 Aug 2012 13:43:58 +0000 (16:43 +0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Mon, 3 Sep 2012 08:09:30 +0000 (10:09 +0200)
The sdvo hotplug support check and activation has worked by coincidence for
TMDS0. The boolean value returned by intel_sdvo_supports_hotplug() was
masked with a bit shifted by device number, which also should have been one
of SDVO_OUTPUT_* bits instead. Boolean true masked with 1 shifted by 0 just
happened to match SDVO_OUTPUT_TMDS0...

Get hotplug support as a bit mask, check the correct bits for support, and
use the correct bits for activating hotplug support.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_sdvo.c

index 9a31211a60c6b1b4cb999ea7584069131bd92f1f..6c9a85759bc30514b14b6c32e1fceba8d259a5bb 100644 (file)
@@ -97,7 +97,7 @@ struct intel_sdvo {
        /*
         * Hotplug activation bits for this device
         */
-       uint8_t hotplug_active[2];
+       uint16_t hotplug_active;
 
        /**
         * This is used to select the color range of RBG outputs in HDMI mode.
@@ -1251,25 +1251,29 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
        return true;
 }
 
-static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
+static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo)
 {
        struct drm_device *dev = intel_sdvo->base.base.dev;
-       u8 response[2];
+       uint16_t hotplug;
 
        /* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise
         * on the line. */
        if (IS_I945G(dev) || IS_I945GM(dev))
-               return false;
+               return 0;
+
+       if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
+                                       &hotplug, sizeof(hotplug)))
+               return 0;
 
-       return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
-                                   &response, 2) && response[0];
+       return hotplug;
 }
 
 static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
 {
        struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
 
-       intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
+       intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG,
+                       &intel_sdvo->hotplug_active, 2);
 }
 
 static bool
@@ -2061,17 +2065,18 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 
        intel_connector = &intel_sdvo_connector->base;
        connector = &intel_connector->base;
-       if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+       if (intel_sdvo_get_hotplug_support(intel_sdvo) &
+               intel_sdvo_connector->output_flag) {
                connector->polled = DRM_CONNECTOR_POLL_HPD;
-               intel_sdvo->hotplug_active[0] |= 1 << device;
+               intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag;
                /* Some SDVO devices have one-shot hotplug interrupts.
                 * Ensure that they get re-enabled when an interrupt happens.
                 */
                intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
                intel_sdvo_enable_hotplug(intel_encoder);
-       }
-       else
+       } else {
                connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+       }
        encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
        connector->connector_type = DRM_MODE_CONNECTOR_DVID;
 
@@ -2587,7 +2592,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
        /* Only enable the hotplug irq if we need it, to work around noisy
         * hotplug lines.
         */
-       if (intel_sdvo->hotplug_active[0])
+       if (intel_sdvo->hotplug_active)
                dev_priv->hotplug_supported_mask |= hotplug_mask;
 
        intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);