ARM: dts: apq8064: rename db600c to SD_600eval
authorSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fri, 10 Jun 2016 18:19:54 +0000 (19:19 +0100)
committerAndy Gross <andy.gross@linaro.org>
Mon, 27 Jun 2016 22:36:52 +0000 (17:36 -0500)
This board has been renamed recently and announced at
https://eragon.einfochips.com/products/sd-600eval.html

So rename this board files so that it reflects actual product in market.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi [deleted file]
arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts [deleted file]
arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi [new file with mode: 0644]
arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts [new file with mode: 0644]

index 06b6c2d695bfb6bfbb0a61bbfffd958a58bf20d3..5b7c17a1950e8e219a135b8d358a402c2c1ee714 100644 (file)
@@ -572,7 +572,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
 dtb-$(CONFIG_ARCH_OXNAS) += \
        wd-mbwe.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
-       qcom-apq8064-arrow-db600c.dtb \
+       qcom-apq8064-arrow-sd-600eval.dtb \
        qcom-apq8064-cm-qs600.dtb \
        qcom-apq8064-ifc6410.dtb \
        qcom-apq8064-sony-xperia-yuga.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi
deleted file mode 100644 (file)
index a3efb97..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-&tlmm_pinmux {
-       card_detect: card-detect {
-               mux {
-                       pins = "gpio26";
-                       function = "gpio";
-                       bias-disable;
-               };
-       };
-
-       pcie_pins: pcie-pinmux {
-               mux {
-                       pins = "gpio27";
-                       function = "gpio";
-               };
-               conf {
-                       pins = "gpio27";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-       };
-
-       user_leds: user-leds {
-               mux {
-                       pins = "gpio3", "gpio7", "gpio10", "gpio11";
-                       function = "gpio";
-               };
-
-               conf {
-                       pins = "gpio3", "gpio7", "gpio10", "gpio11";
-                       function = "gpio";
-                       output-low;
-               };
-       };
-
-       magneto_pins: magneto-pins {
-               mux {
-                       pins = "gpio31", "gpio48";
-                       function = "gpio";
-                       bias-disable;
-               };
-       };
-};
-
-&pm8921_mpps {
-       mpp_leds: mpp-leds {
-               pinconf {
-                       pins = "mpp7", "mpp8";
-                       function = "digital";
-                       output-low;
-               };
-       };
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
deleted file mode 100644 (file)
index e01b27e..0000000
+++ /dev/null
@@ -1,349 +0,0 @@
-#include "qcom-apq8064-v2.0.dtsi"
-#include "qcom-apq8064-arrow-db600c-pins.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       model = "Arrow Electronics, APQ8064 DB600c";
-       compatible = "arrow,db600c", "qcom,apq8064";
-
-       aliases {
-               serial0 = &gsbi7_serial;
-               serial1 = &gsbi1_serial;
-               i2c0 = &gsbi2_i2c;
-               i2c1 = &gsbi3_i2c;
-               i2c2 = &gsbi4_i2c;
-               i2c3 = &gsbi7_i2c;
-               spi0 = &gsbi5_spi;
-       };
-
-       regulators {
-               compatible = "simple-bus";
-               vph: regulator-fixed@1 {
-                       compatible = "regulator-fixed";
-                       regulator-min-microvolt = <4500000>;
-                       regulator-max-microvolt = <4500000>;
-                       regulator-name = "VPH";
-                       regulator-type = "voltage";
-                       regulator-boot-on;
-               };
-
-               /* on board fixed 3.3v supply */
-               vcc3v3: vcc3v3 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "VCC3V3";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       regulator-always-on;
-               };
-
-       };
-
-       soc {
-               rpm@108000 {
-                       regulators {
-                               vdd_s1-supply = <&vph>;
-                               vdd_s2-supply = <&vph>;
-                               vdd_s3-supply = <&vph>;
-                               vdd_s4-supply = <&vph>;
-                               vdd_s5-supply = <&vph>;
-                               vdd_s6-supply = <&vph>;
-                               vdd_s7-supply = <&vph>;
-                               vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-                               vdd_l3_l15_l17-supply = <&vph>;
-                               vdd_l4_l14-supply = <&vph>;
-                               vdd_l5_l8_l16-supply = <&vph>;
-                               vdd_l6_l7-supply = <&vph>;
-                               vdd_l9_l11-supply = <&vph>;
-                               vdd_l10_l22-supply = <&vph>;
-                               vdd_l21_l23_l29-supply = <&vph>;
-                               vdd_l24-supply = <&pm8921_s1>;
-                               vdd_l25-supply = <&pm8921_s1>;
-                               vdd_l26-supply = <&pm8921_s7>;
-                               vdd_l27-supply = <&pm8921_s7>;
-                               vdd_l28-supply = <&pm8921_s7>;
-                               vin_lvs1_3_6-supply = <&pm8921_s4>;
-                               vin_lvs2-supply = <&pm8921_s1>;
-                               vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-                               s1 {
-                                       regulator-always-on;
-                                       regulator-min-microvolt = <1225000>;
-                                       regulator-max-microvolt = <1225000>;
-                                       qcom,switch-mode-frequency = <3200000>;
-                                       bias-pull-down;
-                               };
-
-                               s3 {
-                                       regulator-min-microvolt = <1000000>;
-                                       regulator-max-microvolt = <1400000>;
-                                       qcom,switch-mode-frequency = <4800000>;
-                               };
-
-                               s4 {
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       qcom,switch-mode-frequency = <3200000>;
-                                       bias-pull-down;
-                                       regulator-always-on;
-                               };
-
-                               s7 {
-                                       regulator-min-microvolt = <1300000>;
-                                       regulator-max-microvolt = <1300000>;
-                                       qcom,switch-mode-frequency = <3200000>;
-                                };
-
-                               l3 {
-                                       regulator-min-microvolt = <3050000>;
-                                       regulator-max-microvolt = <3300000>;
-                                       bias-pull-down;
-                               };
-
-                               l4 {
-                                       regulator-min-microvolt = <1000000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       bias-pull-down;
-                               };
-
-                               l5 {
-                                       regulator-min-microvolt = <2750000>;
-                                       regulator-max-microvolt = <3000000>;
-                                       bias-pull-down;
-                                       regulator-boot-on;
-                                       regulator-always-on;
-                               };
-
-                               l6 {
-                                       regulator-min-microvolt = <2950000>;
-                                       regulator-max-microvolt = <2950000>;
-                                       bias-pull-down;
-                               };
-
-                               l23 {
-                                       regulator-min-microvolt = <1700000>;
-                                       regulator-max-microvolt = <1900000>;
-                                       bias-pull-down;
-                               };
-
-                               lvs6 {
-                                       bias-pull-down;
-                               };
-
-                               lvs7 {
-                                       bias-pull-down;
-                               };
-                       };
-               };
-
-               gsbi@12440000 {
-                       status = "okay";
-                       qcom,mode = <GSBI_PROT_UART_W_FC>;
-                       serial@12450000 {
-                               label = "LS-UART1";
-                               status = "okay";
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&gsbi1_uart_4pins>;
-                       };
-               };
-
-               gsbi@12480000 {
-                       status = "okay";
-                       qcom,mode = <GSBI_PROT_I2C>;
-                       i2c@124a0000 {
-                               /* On Low speed expansion and Sensors */
-                               label = "LS-I2C0";
-                               status = "okay";
-                               lis3mdl_mag@1e {
-                                       compatible = "st,lis3mdl-magn";
-                                       reg = <0x1e>;
-                                       vdd-supply = <&vcc3v3>;
-                                       vddio-supply = <&pm8921_s4>;
-                                       pinctrl-names = "default";
-                                       pinctrl-0 = <&magneto_pins>;
-                                       interrupt-parent = <&tlmm_pinmux>;
-
-                                       st,drdy-int-pin = <2>;
-                                       interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
-                                                    <31 IRQ_TYPE_EDGE_RISING>; /* INT */
-                               };
-                       };
-               };
-
-               gsbi@16200000 {
-                       status = "okay";
-                       qcom,mode = <GSBI_PROT_I2C>;
-                       i2c@16280000 {
-                       /* On Low speed expansion */
-                               status = "okay";
-                               label = "LS-I2C1";
-                               clock-frequency = <200000>;
-                               eeprom@52 {
-                                       compatible = "atmel,24c128";
-                                       reg = <0x52>;
-                                       pagesize = <64>;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       status = "okay";
-                       qcom,mode = <GSBI_PROT_I2C>;
-                       i2c@16380000 {
-                               /* On High speed expansion */
-                               label = "HS-CAM-I2C3";
-                               status = "okay";
-                       };
-               };
-
-               gsbi@1a200000 {
-                       status = "okay";
-                       spi@1a280000 {
-                               /* On Low speed expansion */
-                               label = "LS-SPI0";
-                               status = "okay";
-                       };
-               };
-
-               /* DEBUG UART  */
-               gsbi@16600000 {
-                       status = "okay";
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       serial@16640000 {
-                               label = "LS-UART0";
-                               status = "okay";
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&gsbi7_uart_2pins>;
-                       };
-
-                       i2c@16680000 {
-                               /* On High speed expansion */
-                               status = "okay";
-                               label = "HS-CAM-I2C2";
-                       };
-               };
-
-               leds {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&user_leds>, <&mpp_leds>;
-
-                       compatible = "gpio-leds";
-
-                       user-led0 {
-                               label = "user0-led";
-                               gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
-                               linux,default-trigger = "heartbeat";
-                               default-state = "off";
-                       };
-
-                       user-led1 {
-                               label = "user1-led";
-                               gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
-                               linux,default-trigger = "mmc0";
-                               default-state = "off";
-                       };
-
-                       user-led2 {
-                               label = "user2-led";
-                               gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
-                               linux,default-trigger = "mmc1";
-                               default-state = "off";
-                       };
-
-                       user-led3 {
-                               label = "user3-led";
-                               gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
-                               linux,default-trigger = "none";
-                               default-state = "off";
-                       };
-
-                       wifi-led {
-                               label = "WiFi-led";
-                               gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
-                               default-state = "off";
-                       };
-
-                       bt-led {
-                               label = "BT-led";
-                               gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
-                               default-state = "off";
-                       };
-               };
-
-               pci@1b500000 {
-                       status = "okay";
-                       vdda-supply = <&pm8921_s3>;
-                       vdda_phy-supply = <&pm8921_lvs6>;
-                       vdda_refclk-supply = <&vcc3v3>;
-                       pinctrl-0 = <&pcie_pins>;
-                       pinctrl-names = "default";
-                       perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-               };
-
-               phy@1b400000 {
-                       status = "okay";
-               };
-
-               sata@29000000 {
-                       status  = "okay";
-                       target-supply   = <&pm8921_lvs7>;
-               };
-
-               /* OTG */
-               phy@12500000 {
-                       status          = "okay";
-                       dr_mode         = "peripheral";
-                       vddcx-supply    = <&pm8921_s3>;
-                       v3p3-supply     = <&pm8921_l3>;
-                       v1p8-supply     = <&pm8921_l4>;
-               };
-
-               phy@12520000 {
-                       status          = "okay";
-                       vddcx-supply    = <&pm8921_s3>;
-                       v3p3-supply     = <&pm8921_l3>;
-                       v1p8-supply     = <&pm8921_l23>;
-               };
-
-               phy@12530000 {
-                       status          = "okay";
-                       vddcx-supply    = <&pm8921_s3>;
-                       v3p3-supply     = <&pm8921_l3>;
-                       v1p8-supply     = <&pm8921_l23>;
-               };
-
-               gadget@12500000 {
-                       status = "okay";
-               };
-
-               /* OTG */
-               usb@12500000 {
-                       status = "okay";
-               };
-
-               usb@12520000 {
-                       status = "okay";
-               };
-
-               usb@12530000 {
-                       status = "okay";
-               };
-
-               amba {
-                       /* eMMC */
-                       sdcc@12400000 {
-                               status = "okay";
-                               vmmc-supply = <&pm8921_l5>;
-                               vqmmc-supply = <&pm8921_s4>;
-                       };
-
-                       /* External micro SD card */
-                       sdcc@12180000 {
-                               status = "okay";
-                               vmmc-supply = <&pm8921_l6>;
-                               pinctrl-names   = "default";
-                               pinctrl-0       = <&card_detect>;
-                               cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
-                       };
-               };
-       };
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
new file mode 100644 (file)
index 0000000..a3efb97
--- /dev/null
@@ -0,0 +1,52 @@
+&tlmm_pinmux {
+       card_detect: card-detect {
+               mux {
+                       pins = "gpio26";
+                       function = "gpio";
+                       bias-disable;
+               };
+       };
+
+       pcie_pins: pcie-pinmux {
+               mux {
+                       pins = "gpio27";
+                       function = "gpio";
+               };
+               conf {
+                       pins = "gpio27";
+                       drive-strength = <12>;
+                       bias-disable;
+               };
+       };
+
+       user_leds: user-leds {
+               mux {
+                       pins = "gpio3", "gpio7", "gpio10", "gpio11";
+                       function = "gpio";
+               };
+
+               conf {
+                       pins = "gpio3", "gpio7", "gpio10", "gpio11";
+                       function = "gpio";
+                       output-low;
+               };
+       };
+
+       magneto_pins: magneto-pins {
+               mux {
+                       pins = "gpio31", "gpio48";
+                       function = "gpio";
+                       bias-disable;
+               };
+       };
+};
+
+&pm8921_mpps {
+       mpp_leds: mpp-leds {
+               pinconf {
+                       pins = "mpp7", "mpp8";
+                       function = "digital";
+                       output-low;
+               };
+       };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
new file mode 100644 (file)
index 0000000..7df0108
--- /dev/null
@@ -0,0 +1,349 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "Arrow Electronics, APQ8064 SD_600eval";
+       compatible = "arrow,sd_600eval", "qcom,apq8064";
+
+       aliases {
+               serial0 = &gsbi7_serial;
+               serial1 = &gsbi1_serial;
+               i2c0 = &gsbi2_i2c;
+               i2c1 = &gsbi3_i2c;
+               i2c2 = &gsbi4_i2c;
+               i2c3 = &gsbi7_i2c;
+               spi0 = &gsbi5_spi;
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               vph: regulator-fixed@1 {
+                       compatible = "regulator-fixed";
+                       regulator-min-microvolt = <4500000>;
+                       regulator-max-microvolt = <4500000>;
+                       regulator-name = "VPH";
+                       regulator-type = "voltage";
+                       regulator-boot-on;
+               };
+
+               /* on board fixed 3.3v supply */
+               vcc3v3: vcc3v3 {
+                       compatible = "regulator-fixed";
+                       regulator-name = "VCC3V3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+       };
+
+       soc {
+               rpm@108000 {
+                       regulators {
+                               vdd_s1-supply = <&vph>;
+                               vdd_s2-supply = <&vph>;
+                               vdd_s3-supply = <&vph>;
+                               vdd_s4-supply = <&vph>;
+                               vdd_s5-supply = <&vph>;
+                               vdd_s6-supply = <&vph>;
+                               vdd_s7-supply = <&vph>;
+                               vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+                               vdd_l3_l15_l17-supply = <&vph>;
+                               vdd_l4_l14-supply = <&vph>;
+                               vdd_l5_l8_l16-supply = <&vph>;
+                               vdd_l6_l7-supply = <&vph>;
+                               vdd_l9_l11-supply = <&vph>;
+                               vdd_l10_l22-supply = <&vph>;
+                               vdd_l21_l23_l29-supply = <&vph>;
+                               vdd_l24-supply = <&pm8921_s1>;
+                               vdd_l25-supply = <&pm8921_s1>;
+                               vdd_l26-supply = <&pm8921_s7>;
+                               vdd_l27-supply = <&pm8921_s7>;
+                               vdd_l28-supply = <&pm8921_s7>;
+                               vin_lvs1_3_6-supply = <&pm8921_s4>;
+                               vin_lvs2-supply = <&pm8921_s1>;
+                               vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+                               s1 {
+                                       regulator-always-on;
+                                       regulator-min-microvolt = <1225000>;
+                                       regulator-max-microvolt = <1225000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                                       bias-pull-down;
+                               };
+
+                               s3 {
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1400000>;
+                                       qcom,switch-mode-frequency = <4800000>;
+                               };
+
+                               s4 {
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                                       bias-pull-down;
+                                       regulator-always-on;
+                               };
+
+                               s7 {
+                                       regulator-min-microvolt = <1300000>;
+                                       regulator-max-microvolt = <1300000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                                };
+
+                               l3 {
+                                       regulator-min-microvolt = <3050000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       bias-pull-down;
+                               };
+
+                               l4 {
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       bias-pull-down;
+                               };
+
+                               l5 {
+                                       regulator-min-microvolt = <2750000>;
+                                       regulator-max-microvolt = <3000000>;
+                                       bias-pull-down;
+                                       regulator-boot-on;
+                                       regulator-always-on;
+                               };
+
+                               l6 {
+                                       regulator-min-microvolt = <2950000>;
+                                       regulator-max-microvolt = <2950000>;
+                                       bias-pull-down;
+                               };
+
+                               l23 {
+                                       regulator-min-microvolt = <1700000>;
+                                       regulator-max-microvolt = <1900000>;
+                                       bias-pull-down;
+                               };
+
+                               lvs6 {
+                                       bias-pull-down;
+                               };
+
+                               lvs7 {
+                                       bias-pull-down;
+                               };
+                       };
+               };
+
+               gsbi@12440000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_UART_W_FC>;
+                       serial@12450000 {
+                               label = "LS-UART1";
+                               status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&gsbi1_uart_4pins>;
+                       };
+               };
+
+               gsbi@12480000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_I2C>;
+                       i2c@124a0000 {
+                               /* On Low speed expansion and Sensors */
+                               label = "LS-I2C0";
+                               status = "okay";
+                               lis3mdl_mag@1e {
+                                       compatible = "st,lis3mdl-magn";
+                                       reg = <0x1e>;
+                                       vdd-supply = <&vcc3v3>;
+                                       vddio-supply = <&pm8921_s4>;
+                                       pinctrl-names = "default";
+                                       pinctrl-0 = <&magneto_pins>;
+                                       interrupt-parent = <&tlmm_pinmux>;
+
+                                       st,drdy-int-pin = <2>;
+                                       interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+                                                    <31 IRQ_TYPE_EDGE_RISING>; /* INT */
+                               };
+                       };
+               };
+
+               gsbi@16200000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_I2C>;
+                       i2c@16280000 {
+                       /* On Low speed expansion */
+                               status = "okay";
+                               label = "LS-I2C1";
+                               clock-frequency = <200000>;
+                               eeprom@52 {
+                                       compatible = "atmel,24c128";
+                                       reg = <0x52>;
+                                       pagesize = <64>;
+                               };
+                       };
+               };
+
+               gsbi@16300000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_I2C>;
+                       i2c@16380000 {
+                               /* On High speed expansion */
+                               label = "HS-CAM-I2C3";
+                               status = "okay";
+                       };
+               };
+
+               gsbi@1a200000 {
+                       status = "okay";
+                       spi@1a280000 {
+                               /* On Low speed expansion */
+                               label = "LS-SPI0";
+                               status = "okay";
+                       };
+               };
+
+               /* DEBUG UART  */
+               gsbi@16600000 {
+                       status = "okay";
+                       qcom,mode = <GSBI_PROT_I2C_UART>;
+                       serial@16640000 {
+                               label = "LS-UART0";
+                               status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&gsbi7_uart_2pins>;
+                       };
+
+                       i2c@16680000 {
+                               /* On High speed expansion */
+                               status = "okay";
+                               label = "HS-CAM-I2C2";
+                       };
+               };
+
+               leds {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&user_leds>, <&mpp_leds>;
+
+                       compatible = "gpio-leds";
+
+                       user-led0 {
+                               label = "user0-led";
+                               gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
+                               linux,default-trigger = "heartbeat";
+                               default-state = "off";
+                       };
+
+                       user-led1 {
+                               label = "user1-led";
+                               gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
+                               linux,default-trigger = "mmc0";
+                               default-state = "off";
+                       };
+
+                       user-led2 {
+                               label = "user2-led";
+                               gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
+                               linux,default-trigger = "mmc1";
+                               default-state = "off";
+                       };
+
+                       user-led3 {
+                               label = "user3-led";
+                               gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
+                               linux,default-trigger = "none";
+                               default-state = "off";
+                       };
+
+                       wifi-led {
+                               label = "WiFi-led";
+                               gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
+                               default-state = "off";
+                       };
+
+                       bt-led {
+                               label = "BT-led";
+                               gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
+                               default-state = "off";
+                       };
+               };
+
+               pci@1b500000 {
+                       status = "okay";
+                       vdda-supply = <&pm8921_s3>;
+                       vdda_phy-supply = <&pm8921_lvs6>;
+                       vdda_refclk-supply = <&vcc3v3>;
+                       pinctrl-0 = <&pcie_pins>;
+                       pinctrl-names = "default";
+                       perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+               };
+
+               phy@1b400000 {
+                       status = "okay";
+               };
+
+               sata@29000000 {
+                       status  = "okay";
+                       target-supply   = <&pm8921_lvs7>;
+               };
+
+               /* OTG */
+               phy@12500000 {
+                       status          = "okay";
+                       dr_mode         = "peripheral";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l4>;
+               };
+
+               phy@12520000 {
+                       status          = "okay";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l23>;
+               };
+
+               phy@12530000 {
+                       status          = "okay";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l23>;
+               };
+
+               gadget@12500000 {
+                       status = "okay";
+               };
+
+               /* OTG */
+               usb@12500000 {
+                       status = "okay";
+               };
+
+               usb@12520000 {
+                       status = "okay";
+               };
+
+               usb@12530000 {
+                       status = "okay";
+               };
+
+               amba {
+                       /* eMMC */
+                       sdcc@12400000 {
+                               status = "okay";
+                               vmmc-supply = <&pm8921_l5>;
+                               vqmmc-supply = <&pm8921_s4>;
+                       };
+
+                       /* External micro SD card */
+                       sdcc@12180000 {
+                               status = "okay";
+                               vmmc-supply = <&pm8921_l6>;
+                               pinctrl-names   = "default";
+                               pinctrl-0       = <&card_detect>;
+                               cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
+                       };
+               };
+       };
+};