x86, boot: stylistic cleanups for boot/compressed/head_32.S

Reformat arch/x86/boot/compressed/head_32.S to be closer to currently
preferred kernel assembly style, that is:

- opcode and operand separated by tab
- operands separated by ", "
- C-style comments

This also makes it more similar to head_64.S.

[ Impact: cleanup, no object code change ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index e3398f3d1b34b5c4b55ab5ec6e7c7af797a258fe..7bd7766ffabfd25d9dbcc61620efb83de8c63bd1 100644 (file)
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -12,16 +12,16 @@
  * the page directory. [According to comments etc elsewhere on a compressed
  * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
  *
- * Page 0 is deliberately kept safe, since System Management Mode code in 
+ * Page 0 is deliberately kept safe, since System Management Mode code in
  * laptops may need to access the BIOS data stored there.  This is also
- * useful for future device drivers that either access the BIOS via VM86 
+ * useful for future device drivers that either access the BIOS via VM86
  * mode.
  */
 
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.text
+       .text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -29,75 +29,80 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head","ax",@progbits
+       .section ".text.head","ax",@progbits
 ENTRY(startup_32)
        cld
-       /* test KEEP_SEGMENTS flag to see if the bootloader is asking
-        * us to not reload segments */
-       testb $(1<<6), BP_loadflags(%esi)
-       jnz 1f
+       /*
+        * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+        * us to not reload segments
+        */
+       testb   $(1<<6), BP_loadflags(%esi)
+       jnz     1f
 
        cli
-       movl $(__BOOT_DS),%eax
-       movl %eax,%ds
-       movl %eax,%es
-       movl %eax,%fs
-       movl %eax,%gs
-       movl %eax,%ss
+       movl    $__BOOT_DS, %eax
+       movl    %eax, %ds
+       movl    %eax, %es
+       movl    %eax, %fs
+       movl    %eax, %gs
+       movl    %eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-       leal (BP_scratch+4)(%esi), %esp
-       call 1f
-1:     popl %ebp
-       subl $1b, %ebp
+       leal    (BP_scratch+4)(%esi), %esp
+       call    1f
+1:     popl    %ebp
+       subl    $1b, %ebp
 
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
-       movl    %ebp, %ebx
+       movl    %ebp, %ebx
        addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
        andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
 #else
-       movl $LOAD_PHYSICAL_ADDR, %ebx
+       movl    $LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
        /* Replace the compressed data size with the uncompressed size */
-       subl input_len(%ebp), %ebx
-       movl output_len(%ebp), %eax
-       addl %eax, %ebx
+       subl    input_len(%ebp), %ebx
+       movl    output_len(%ebp), %eax
+       addl    %eax, %ebx
        /* Add 8 bytes for every 32K input block */
-       shrl $12, %eax
-       addl %eax, %ebx
+       shrl    $12, %eax
+       addl    %eax, %ebx
        /* Add 32K + 18 bytes of extra slack */
-       addl $(32768 + 18), %ebx
+       addl    $(32768 + 18), %ebx
        /* Align on a 4K boundary */
-       addl $4095, %ebx
-       andl $~4095, %ebx
+       addl    $4095, %ebx
+       andl    $~4095, %ebx
 
-/* Copy the compressed kernel to the end of our buffer
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-       pushl %esi
-       leal _ebss(%ebp), %esi
-       leal _ebss(%ebx), %edi
-       movl $(_ebss - startup_32), %ecx
+       pushl   %esi
+       leal    _ebss(%ebp), %esi
+       leal    _ebss(%ebx), %edi
+       movl    $(_ebss - startup_32), %ecx
        std
-       rep
-       movsb
+       rep     movsb
        cld
-       popl %esi
+       popl    %esi
 
-/* Compute the kernel start address.
+/*
+ * Compute the kernel start address.
  */
 #ifdef CONFIG_RELOCATABLE
        addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
@@ -109,81 +114,84 @@ ENTRY(startup_32)
 /*
  * Jump to the relocated address.
  */
-       leal relocated(%ebx), %eax
-       jmp *%eax
+       leal    relocated(%ebx), %eax
+       jmp     *%eax
 ENDPROC(startup_32)
 
-.section ".text"
+       .text
 relocated:
 
 /*
  * Clear BSS
  */
-       xorl %eax,%eax
-       leal _edata(%ebx),%edi
-       leal _ebss(%ebx), %ecx
-       subl %edi,%ecx
+       xorl    %eax, %eax
+       leal    _edata(%ebx), %edi
+       leal    _ebss(%ebx), %ecx
+       subl    %edi, %ecx
        cld
-       rep
-       stosb
+       rep     stosb
 
 /*
  * Setup the stack for the decompressor
  */
-       leal boot_stack_end(%ebx), %esp
+       leal    boot_stack_end(%ebx), %esp
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-       movl output_len(%ebx), %eax
-       pushl %eax
-                       # push arguments for decompress_kernel:
-       pushl %ebp      # output address
-       movl input_len(%ebx), %eax
-       pushl %eax      # input_len
-       leal input_data(%ebx), %eax
-       pushl %eax      # input_data
-       leal boot_heap(%ebx), %eax
-       pushl %eax      # heap area
-       pushl %esi      # real mode pointer
-       call decompress_kernel
-       addl $20, %esp
-       popl %ecx
+       movl    output_len(%ebx), %eax
+       pushl   %eax
+                               /* push arguments for decompress_kernel: */
+       pushl   %ebp            /* output address */
+       movl    input_len(%ebx), %eax
+       pushl   %eax            /* input_len */
+       leal    input_data(%ebx), %eax
+       pushl   %eax            /* input_data */
+       leal    boot_heap(%ebx), %eax
+       pushl   %eax            /* heap area */
+       pushl   %esi            /* real mode pointer */
+       call    decompress_kernel
+       addl    $20, %esp
+       popl    %ecx
 
 #if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
  */
-       movl %ebp, %edi
-       addl %ecx, %edi
+       movl    %ebp, %edi
+       addl    %ecx, %edi
 
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
  * and where it was actually loaded.
  */
-       movl %ebp, %ebx
-       subl $LOAD_PHYSICAL_ADDR, %ebx
-       jz   2f         /* Nothing to be done if loaded at compiled addr. */
+       movl    %ebp, %ebx
+       subl    $LOAD_PHYSICAL_ADDR, %ebx
+       jz      2f      /* Nothing to be done if loaded at compiled addr. */
 /*
  * Process relocations.
  */
 
-1:     subl $4, %edi
-       movl 0(%edi), %ecx
-       testl %ecx, %ecx
-       jz 2f
-       addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
-       jmp 1b
+1:     subl    $4, %edi
+       movl    (%edi), %ecx
+       testl   %ecx, %ecx
+       jz      2f
+       addl    %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+       jmp     1b
 2:
 #endif
 
 /*
  * Jump to the decompressed kernel.
  */
-       xorl %ebx,%ebx
-       jmp *%ebp
+       xorl    %ebx, %ebx
+       jmp     *%ebp
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+       .bss
+       .balign 4
 boot_heap:
        .fill BOOT_HEAP_SIZE, 1, 0
 boot_stack: