jmicron ATA: reimplement jmicron ATA quirk

Reimplement jmicron ATA quirk.

* renamed to quirk_jmicron_ata()
* quirk is invoked only for the affected controllers
* programming is stricter.  e.g. conf5 bit24 is cleared if
  unnecessary.
* code factored for readability
* JMB360 and JMB368 are programmed into proper mode

Verified on JMB360, 363 and 368.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1e6eda25c0d82c800cf260a832209ee70899d9b7..1e6e1e4d332752b7a14941b1f9ac05be0bfd5630 100644 (file)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1218,45 +1218,65 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8237, asus_hides_a
  *     do this early on to make the additional device appear during
  *     the PCI scanning.
  */
-
-static void quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_ata(struct pci_dev *pdev)
 {
-       u32 conf;
+       u32 conf1, conf5;
        u8 hdr;
 
        /* Only poke fn 0 */
        if (PCI_FUNC(pdev->devfn))
                return;
 
-       switch(pdev->device) {
-               case PCI_DEVICE_ID_JMICRON_JMB365:
-               case PCI_DEVICE_ID_JMICRON_JMB366:
-                       /* Redirect IDE second PATA port to the right spot */
-                       pci_read_config_dword(pdev, 0x80, &conf);
-                       conf |= (1 << 24);
-                       /* Fall through */
-                       pci_write_config_dword(pdev, 0x80, conf);
-               case PCI_DEVICE_ID_JMICRON_JMB361:
-               case PCI_DEVICE_ID_JMICRON_JMB363:
-                       pci_read_config_dword(pdev, 0x40, &conf);
-                       /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
-                       /* Set the class codes correctly and then direct IDE 0 */
-                       conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
-                       conf |=  0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
-                       pci_write_config_dword(pdev, 0x40, conf);
-
-                       /* Reconfigure so that the PCI scanner discovers the
-                          device is now multifunction */
-
-                       pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
-                       pdev->hdr_type = hdr & 0x7f;
-                       pdev->multifunction = !!(hdr & 0x80);
+       pci_read_config_dword(pdev, 0x40, &conf1);
+       pci_read_config_dword(pdev, 0x80, &conf5);
 
-                       break;
+       conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+       conf5 &= ~(1 << 24);  /* Clear bit 24 */
+
+       switch (pdev->device) {
+       case PCI_DEVICE_ID_JMICRON_JMB360:
+               /* The controller should be in single function ahci mode */
+               conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+               break;
+
+       case PCI_DEVICE_ID_JMICRON_JMB365:
+       case PCI_DEVICE_ID_JMICRON_JMB366:
+               /* Redirect IDE second PATA port to the right spot */
+               conf5 |= (1 << 24);
+               /* Fall through */
+       case PCI_DEVICE_ID_JMICRON_JMB361:
+       case PCI_DEVICE_ID_JMICRON_JMB363:
+               /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+               /* Set the class codes correctly and then direct IDE 0 */
+               conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
+               break;
+
+       case PCI_DEVICE_ID_JMICRON_JMB368:
+               /* The controller should be in single function IDE mode */
+               conf1 |= 0x00C00000; /* Set 22, 23 */
+               break;
        }
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+       pci_write_config_dword(pdev, 0x40, conf1);
+       pci_write_config_dword(pdev, 0x80, conf5);
+
+       /* Update pdev accordingly */
+       pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+       pdev->hdr_type = hdr & 0x7f;
+       pdev->multifunction = !!(hdr & 0x80);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
 
 #endif