* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed (%d)\n",
- err);
+ pr_err("Device allocation failed (%d)\n", err);
goto EXIT;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto EXIT_DEV_PUT;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto EXIT_DEV_PUT;
}
superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {
- printk(KERN_WARNING DRVNAME ": HW monitor is disabled, "
- "skipping\n");
+ pr_warn("HW monitor is disabled, skipping\n");
goto EXIT;
}
*address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
(superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;
if (*address == 0) {
- printk(KERN_WARNING DRVNAME ": Base address is not set, "
- "skipping\n");
+ pr_warn("Base address is not set, skipping\n");
goto EXIT;
}
err = 0;
- printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, "
- "revision %u\n", *address,
- superio_inb(sio_cip, SIO_VT1211_DEVREV));
+ pr_info("Found VT1211 chip at 0x%04x, revision %u\n",
+ *address, superio_inb(sio_cip, SIO_VT1211_DEVREV));
EXIT:
superio_exit(sio_cip);
if ((uch_config < -1) || (uch_config > 31)) {
err = -EINVAL;
- printk(KERN_WARNING DRVNAME ": Invalid UCH configuration %d. "
- "Choose a value between 0 and 31.\n", uch_config);
+ pr_warn("Invalid UCH configuration %d. "
+ "Choose a value between 0 and 31.\n", uch_config);
goto EXIT;
}
if ((int_mode < -1) || (int_mode > 0)) {
err = -EINVAL;
- printk(KERN_WARNING DRVNAME ": Invalid interrupt mode %d. "
- "Only mode 0 is supported.\n", int_mode);
+ pr_warn("Invalid interrupt mode %d. "
+ "Only mode 0 is supported.\n", int_mode);
goto EXIT;
}