[media] cx24110: Fix whitespaces at cx24110_set_fec()

It is hard to read what's there, because it doesn't follow the
CodingStyle.

Add missing whitespaces to split function arguments.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c
index e78e7893e8aa33cb426c024dd5699bd4649ee673..4f5c992afe678320dc8eae3798ff0bdf9097c571 100644 (file)
--- a/drivers/media/dvb-frontends/cx24110.c
+++ b/drivers/media/dvb-frontends/cx24110.c
@@ -192,28 +192,29 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
        if (fec > FEC_AUTO)
                fec = FEC_AUTO;
 
-       if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
-               cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
+       if (fec == FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+               cx24110_writereg(state, 0x37, cx24110_readreg(state, 0x37) & 0xdf);
                /* clear AcqVitDis bit */
-               cx24110_writereg(state,0x18,0xae);
+               cx24110_writereg(state, 0x18, 0xae);
                /* allow all DVB standard code rates */
-               cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|0x3);
+               cx24110_writereg(state, 0x05, (cx24110_readreg(state, 0x05) & 0xf0) | 0x3);
                /* set nominal Viterbi rate 3/4 */
-               cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|0x3);
+               cx24110_writereg(state, 0x22, (cx24110_readreg(state, 0x22) & 0xf0) | 0x3);
                /* set current Viterbi rate 3/4 */
-               cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
+               cx24110_writereg(state, 0x1a, 0x05);
+               cx24110_writereg(state, 0x1b, 0x06);
                /* set the puncture registers for code rate 3/4 */
                return 0;
        } else {
-               cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
+               cx24110_writereg(state, 0x37, cx24110_readreg(state, 0x37) | 0x20);
                /* set AcqVitDis bit */
-               if(rate[fec]>0) {
-                       cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|rate[fec]);
+               if (rate[fec] > 0) {
+                       cx24110_writereg(state, 0x05, (cx24110_readreg(state, 0x05) & 0xf0) | rate[fec]);
                        /* set nominal Viterbi rate */
-                       cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|rate[fec]);
+                       cx24110_writereg(state, 0x22, (cx24110_readreg(state, 0x22) & 0xf0) | rate[fec]);
                        /* set current Viterbi rate */
-                       cx24110_writereg(state,0x1a,g1[fec]);
-                       cx24110_writereg(state,0x1b,g2[fec]);
+                       cx24110_writereg(state, 0x1a, g1[fec]);
+                       cx24110_writereg(state, 0x1b, g2[fec]);
                        /* not sure if this is the right way: I always used AutoAcq mode */
           } else
                   return -EOPNOTSUPP;