u8 data;
unsigned long flags;
- brcmf_dbg(TRACE, "Entering\n");
+ brcmf_dbg(TRACE, "Entering: irq %d\n", sdiodev->irq);
- brcmf_dbg(ERROR, "requesting irq %d\n", sdiodev->irq);
ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
sdiodev->irq_flags, "brcmf_oob_intr",
&sdiodev->func[1]->dev);
} while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
if (err) {
- brcmf_dbg(ERROR, "failed at addr:0x%0x\n",
+ brcmf_err("failed at addr:0x%0x\n",
SBSDIO_FUNC1_SBADDRLOW + i);
break;
}
} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
if (ret != 0)
- brcmf_dbg(ERROR, "failed with %d\n", ret);
+ brcmf_err("failed with %d\n", ret);
return ret;
}
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
+ brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
+ brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
+ brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
/* try to attach to the target device */
sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
if (!sdiodev->bus) {
- brcmf_dbg(ERROR, "device attach failed\n");
+ brcmf_err("device attach failed\n");
ret = -ENODEV;
goto out;
}
/* Enable Function 2 */
err_ret = sdio_enable_func(sdfunc);
if (err_ret)
- brcmf_dbg(ERROR,
- "enable F2 failed:%d\n",
+ brcmf_err("enable F2 failed:%d\n",
err_ret);
} else {
/* Disable Function 2 */
err_ret = sdio_disable_func(sdfunc);
if (err_ret)
- brcmf_dbg(ERROR,
- "Disable F2 failed:%d\n",
+ brcmf_err("Disable F2 failed:%d\n",
err_ret);
}
}
sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
kfree(sdfunc);
} else if (regaddr < 0xF0) {
- brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr);
+ brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
err_ret = -EPERM;
} else {
sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
}
if (err_ret)
- brcmf_dbg(ERROR, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+ brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
rw ? "write" : "read", func, regaddr, *byte, err_ret);
return err_ret;
int err_ret = -EIO;
if (func == 0) {
- brcmf_dbg(ERROR, "Only CMD52 allowed to F0\n");
+ brcmf_err("Only CMD52 allowed to F0\n");
return -EINVAL;
}
sdio_writew(sdiodev->func[func], (*word & 0xFFFF),
addr, &err_ret);
else
- brcmf_dbg(ERROR, "Invalid nbytes: %d\n", nbytes);
+ brcmf_err("Invalid nbytes: %d\n", nbytes);
} else { /* CMD52 Read */
if (nbytes == 4)
*word = sdio_readl(sdiodev->func[func], addr, &err_ret);
*word = sdio_readw(sdiodev->func[func], addr,
&err_ret) & 0xFFFF;
else
- brcmf_dbg(ERROR, "Invalid nbytes: %d\n", nbytes);
+ brcmf_err("Invalid nbytes: %d\n", nbytes);
}
if (err_ret)
- brcmf_dbg(ERROR, "Failed to %s word, Err: 0x%08x\n",
+ brcmf_err("Failed to %s word, Err: 0x%08x\n",
rw ? "write" : "read", err_ret);
return err_ret;
err_ret = brcmf_sdioh_request_data(sdiodev, write, fifo, func,
addr, pkt, pkt_len);
if (err_ret) {
- brcmf_dbg(ERROR, "%s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
+ brcmf_err("%s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
write ? "TX" : "RX", pkt, SGCount, addr,
pkt_len, err_ret);
} else {
status = brcmf_sdioh_request_data(sdiodev, write, fifo, func,
addr, pkt, pkt_len);
if (status) {
- brcmf_dbg(ERROR, "%s FAILED %p, addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
+ brcmf_err("%s FAILED %p, addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
write ? "TX" : "RX", pkt, addr, pkt_len, status);
} else {
brcmf_dbg(TRACE, "%s xfr'd %p, addr=0x%05x, len=%d\n",
for (i = 0; i < 3; i++) {
regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret);
if (ret != 0)
- brcmf_dbg(ERROR, "Can't read!\n");
+ brcmf_err("Can't read!\n");
*ptr++ = (u8) regdata;
regaddr++;
/* Enable Function 1 */
err_ret = sdio_enable_func(sdiodev->func[1]);
if (err_ret)
- brcmf_dbg(ERROR, "Failed to enable F1 Err: 0x%08x\n", err_ret);
+ brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
return false;
}
err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
if (err_ret) {
- brcmf_dbg(ERROR, "Failed to set F1 blocksize\n");
+ brcmf_err("Failed to set F1 blocksize\n");
goto out;
}
err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
if (err_ret) {
- brcmf_dbg(ERROR, "Failed to set F2 blocksize\n");
+ brcmf_err("Failed to set F2 blocksize\n");
goto out;
}
struct brcmf_sdio_oobirq *oobirq_entry;
if (list_empty(&oobirq_lh)) {
- brcmf_dbg(ERROR, "no valid oob irq resource\n");
+ brcmf_err("no valid oob irq resource\n");
return -ENXIO;
}
brcmf_dbg(TRACE, "F2 found, calling brcmf_sdio_probe...\n");
err = brcmf_sdio_probe(sdiodev);
if (err) {
- brcmf_dbg(ERROR, "F2 error, probe failed %d...\n", err);
+ brcmf_err("F2 error, probe failed %d...\n", err);
goto fail;
}
brcmf_dbg(TRACE, "F2 init completed...\n");
sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
- brcmf_dbg(ERROR, "Host can't keep power while suspended\n");
+ brcmf_err("Host can't keep power while suspended\n");
return -EINVAL;
}
ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
if (ret) {
- brcmf_dbg(ERROR, "Failed to set pm_flags\n");
+ brcmf_err("Failed to set pm_flags\n");
return ret;
}
ret = sdio_register_driver(&brcmf_sdmmc_driver);
if (ret)
- brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
+ brcmf_err("sdio_register_driver failed: %d\n", ret);
return ret;
}
ret = platform_driver_register(&brcmf_sdio_pd);
if (ret)
- brcmf_dbg(ERROR, "platform_driver_register failed: %d\n", ret);
+ brcmf_err("platform_driver_register failed: %d\n", ret);
}
#else
void brcmf_sdio_exit(void)
ret = sdio_register_driver(&brcmf_sdmmc_driver);
if (ret)
- brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
+ brcmf_err("sdio_register_driver failed: %d\n", ret);
}
#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
ret = brcmf_proto_cdc_msg(drvr);
if (ret < 0) {
- brcmf_dbg(ERROR, "brcmf_proto_cdc_msg failed w/status %d\n",
+ brcmf_err("brcmf_proto_cdc_msg failed w/status %d\n",
ret);
goto done;
}
if ((id < prot->reqid) && (++retries < RETRIES))
goto retry;
if (id != prot->reqid) {
- brcmf_dbg(ERROR, "%s: unexpected request id %d (expected %d)\n",
+ brcmf_err("%s: unexpected request id %d (expected %d)\n",
brcmf_ifname(drvr, ifidx), id, prot->reqid);
ret = -EINVAL;
goto done;
id = (flags & CDC_DCMD_ID_MASK) >> CDC_DCMD_ID_SHIFT;
if (id != prot->reqid) {
- brcmf_dbg(ERROR, "%s: unexpected request id %d (expected %d)\n",
+ brcmf_err("%s: unexpected request id %d (expected %d)\n",
brcmf_ifname(drvr, ifidx), id, prot->reqid);
ret = -EINVAL;
goto done;
/* Pop BDC header used to convey priority for buses that don't */
if (pktbuf->len < BDC_HEADER_LEN) {
- brcmf_dbg(ERROR, "rx data too short (%d < %d)\n",
+ brcmf_err("rx data too short (%d < %d)\n",
pktbuf->len, BDC_HEADER_LEN);
return -EBADE;
}
*ifidx = BDC_GET_IF_IDX(h);
if (*ifidx >= BRCMF_MAX_IFS) {
- brcmf_dbg(ERROR, "rx data ifnum out of range (%d)\n", *ifidx);
+ brcmf_err("rx data ifnum out of range (%d)\n", *ifidx);
return -EBADE;
}
if (((h->flags & BDC_FLAG_VER_MASK) >> BDC_FLAG_VER_SHIFT) !=
BDC_PROTO_VER) {
- brcmf_dbg(ERROR, "%s: non-BDC packet received, flags 0x%x\n",
+ brcmf_err("%s: non-BDC packet received, flags 0x%x\n",
brcmf_ifname(drvr, *ifidx), h->flags);
return -EBADE;
}
/* ensure that the msg buf directly follows the cdc msg struct */
if ((unsigned long)(&cdc->msg + 1) != (unsigned long)cdc->buf) {
- brcmf_dbg(ERROR, "struct brcmf_proto is not correctly defined\n");
+ brcmf_err("struct brcmf_proto is not correctly defined\n");
goto fail;
}
p = discard_oldest ? brcmu_pktq_pdeq(q, eprec) :
brcmu_pktq_pdeq_tail(q, eprec);
if (p == NULL)
- brcmf_dbg(ERROR, "brcmu_pktq_penq() failed, oldest %d\n",
+ brcmf_err("brcmu_pktq_penq() failed, oldest %d\n",
discard_oldest);
brcmu_pkt_buf_free_skb(p);
/* Enqueue */
p = brcmu_pktq_penq(q, prec, pkt);
if (p == NULL)
- brcmf_dbg(ERROR, "brcmu_pktq_penq() failed\n");
+ brcmf_err("brcmu_pktq_penq() failed\n");
return p != NULL;
}
{
int i;
if (strncmp(src, "0x", 2) != 0 && strncmp(src, "0X", 2) != 0) {
- brcmf_dbg(ERROR, "Mask invalid format. Needs to start with 0x\n");
+ brcmf_err("Mask invalid format. Needs to start with 0x\n");
return -EINVAL;
}
src = src + 2; /* Skip past 0x */
if (strlen(src) % 2 != 0) {
- brcmf_dbg(ERROR, "Mask invalid format. Length must be even.\n");
+ brcmf_err("Mask invalid format. Length must be even.\n");
return -EINVAL;
}
for (i = 0; *src != '\0'; i++) {
argv = strsep(&arg_save, " ");
if (argv == NULL) {
- brcmf_dbg(ERROR, "No args provided\n");
+ brcmf_err("No args provided\n");
goto fail;
}
err = brcmf_fil_iovar_data_set(ifp, "pkt_filter_enable", &enable_parm,
sizeof(enable_parm));
if (err)
- brcmf_dbg(ERROR, "Set pkt_filter_enable error (%d)\n", err);
+ brcmf_err("Set pkt_filter_enable error (%d)\n", err);
/* Control the master mode */
err = brcmf_fil_iovar_int_set(ifp, "pkt_filter_mode", master_mode);
if (err)
- brcmf_dbg(ERROR, "Set pkt_filter_mode error (%d)\n", err);
+ brcmf_err("Set pkt_filter_mode error (%d)\n", err);
fail:
kfree(arg_org);
while (argv[i]) {
i++;
if (i >= 8) {
- brcmf_dbg(ERROR, "Too many parameters\n");
+ brcmf_err("Too many parameters\n");
goto fail;
}
argv[i] = strsep(&arg_save, " ");
}
if (i != 6) {
- brcmf_dbg(ERROR, "Not enough args provided %d\n", i);
+ brcmf_err("Not enough args provided %d\n", i);
goto fail;
}
(char *)&pkt_filter->u.pattern.mask_and_pattern[mask_size]);
if (mask_size != pattern_size) {
- brcmf_dbg(ERROR, "Mask and pattern not the same size\n");
+ brcmf_err("Mask and pattern not the same size\n");
goto fail;
}
err = brcmf_fil_iovar_data_set(ifp, "pkt_filter_add", pkt_filter,
buf_len);
if (err)
- brcmf_dbg(ERROR, "Set pkt_filter_add error (%d)\n", err);
+ brcmf_err("Set pkt_filter_add error (%d)\n", err);
fail:
kfree(arg_org);
err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
sizeof(ifp->mac_addr));
if (err < 0) {
- brcmf_dbg(ERROR, "Retreiving cur_etheraddr failed, %d\n",
+ brcmf_err("Retreiving cur_etheraddr failed, %d\n",
err);
goto done;
}
strcpy(buf, "ver");
err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
if (err < 0) {
- brcmf_dbg(ERROR, "Retreiving version information failed, %d\n",
+ brcmf_err("Retreiving version information failed, %d\n",
err);
goto done;
}
ptr = (char *)buf;
strsep(&ptr, "\n");
/* Print fw version info */
- brcmf_dbg(ERROR, "Firmware version = %s\n", buf);
+ brcmf_err("Firmware version = %s\n", buf);
/*
* Setup timeout if Beacons are lost and roam is off to report
err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout",
BRCMF_DEFAULT_BCN_TIMEOUT);
if (err) {
- brcmf_dbg(ERROR, "bcn_timeout error (%d)\n", err);
+ brcmf_err("bcn_timeout error (%d)\n", err);
goto done;
}
*/
err = brcmf_fil_iovar_int_set(ifp, "roam_off", 1);
if (err) {
- brcmf_dbg(ERROR, "roam_off error (%d)\n", err);
+ brcmf_err("roam_off error (%d)\n", err);
goto done;
}
err = brcmf_fil_iovar_data_get(ifp, "event_msgs", eventmask,
BRCMF_EVENTING_MASK_LEN);
if (err) {
- brcmf_dbg(ERROR, "Get event_msgs error (%d)\n", err);
+ brcmf_err("Get event_msgs error (%d)\n", err);
goto done;
}
setbit(eventmask, BRCMF_E_IF);
err = brcmf_fil_iovar_data_set(ifp, "event_msgs", eventmask,
BRCMF_EVENTING_MASK_LEN);
if (err) {
- brcmf_dbg(ERROR, "Set event_msgs error (%d)\n", err);
+ brcmf_err("Set event_msgs error (%d)\n", err);
goto done;
}
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
BRCMF_DEFAULT_SCAN_CHANNEL_TIME);
if (err) {
- brcmf_dbg(ERROR, "BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n",
+ brcmf_err("BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n",
err);
goto done;
}
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
BRCMF_DEFAULT_SCAN_UNASSOC_TIME);
if (err) {
- brcmf_dbg(ERROR, "BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n",
+ brcmf_err("BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n",
err);
goto done;
}
#define _BRCMF_DBG_H_
/* message levels */
-#define BRCMF_ERROR_VAL 0x0001
#define BRCMF_TRACE_VAL 0x0002
#define BRCMF_INFO_VAL 0x0004
#define BRCMF_DATA_VAL 0x0008
#define BRCMF_FIL_VAL 0x1000
#define BRCMF_USB_VAL 0x2000
+/* Macro for error messages. net_ratelimit() is used when driver
+ * debugging is not selected. When debugging the driver error
+ * messages are as important as other tracing or even more so.
+ */
+#ifdef CONFIG_BRCMDBG
+#define brcmf_err(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+#else
+#define brcmf_err(fmt, ...) \
+ do { \
+ if (net_ratelimit()) \
+ pr_err("%s: " fmt, __func__, ##__VA_ARGS__); \
+ } while (0)
+#endif
+
#if defined(DEBUG)
-#define brcmf_dbg(level, fmt, ...) \
-do { \
- if (BRCMF_ERROR_VAL == BRCMF_##level##_VAL) { \
- if (brcmf_msg_level & BRCMF_##level##_VAL) { \
- if (net_ratelimit()) \
- pr_debug("%s: " fmt, \
- __func__, ##__VA_ARGS__); \
- } \
- } else { \
- if (brcmf_msg_level & BRCMF_##level##_VAL) { \
- pr_debug("%s: " fmt, \
- __func__, ##__VA_ARGS__); \
- } \
- } \
+#define brcmf_dbg(level, fmt, ...) \
+do { \
+ if (brcmf_msg_level & BRCMF_##level##_VAL) \
+ pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \
} while (0)
#define BRCMF_DATA_ON() (brcmf_msg_level & BRCMF_DATA_VAL)
#define MAX_WAIT_FOR_8021X_TX 50 /* msecs */
/* Error bits */
-int brcmf_msg_level = BRCMF_ERROR_VAL;
+int brcmf_msg_level;
module_param(brcmf_msg_level, int, 0);
char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
{
if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- brcmf_dbg(ERROR, "ifidx %d out of range\n", ifidx);
+ brcmf_err("ifidx %d out of range\n", ifidx);
return "<if_bad>";
}
if (drvr->iflist[ifidx] == NULL) {
- brcmf_dbg(ERROR, "null i/f %d\n", ifidx);
+ brcmf_err("null i/f %d\n", ifidx);
return "<if_null>";
}
err = brcmf_fil_iovar_data_set(ifp, "mcast_list", buf, buflen);
if (err < 0) {
- brcmf_dbg(ERROR, "Setting mcast_list failed, %d\n", err);
+ brcmf_err("Setting mcast_list failed, %d\n", err);
cmd_value = cnt ? true : cmd_value;
}
*/
err = brcmf_fil_iovar_int_set(ifp, "allmulti", cmd_value);
if (err < 0)
- brcmf_dbg(ERROR, "Setting allmulti failed, %d\n", err);
+ brcmf_err("Setting allmulti failed, %d\n", err);
/*Finally, pick up the PROMISC flag */
cmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PROMISC, cmd_value);
if (err < 0)
- brcmf_dbg(ERROR, "Setting BRCMF_C_SET_PROMISC failed, %d\n",
+ brcmf_err("Setting BRCMF_C_SET_PROMISC failed, %d\n",
err);
}
err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr,
ETH_ALEN);
if (err < 0) {
- brcmf_dbg(ERROR, "Setting cur_etheraddr failed, %d\n", err);
+ brcmf_err("Setting cur_etheraddr failed, %d\n", err);
} else {
brcmf_dbg(TRACE, "MAC address updated to %pM\n",
ifp->mac_addr);
/* Reject if down */
if (!drvr->bus_if->drvr_up ||
(drvr->bus_if->state != BRCMF_BUS_DATA)) {
- brcmf_dbg(ERROR, "xmit rejected drvup=%d state=%d\n",
+ brcmf_err("xmit rejected drvup=%d state=%d\n",
drvr->bus_if->drvr_up,
drvr->bus_if->state);
netif_stop_queue(ndev);
}
if (!drvr->iflist[ifp->idx]) {
- brcmf_dbg(ERROR, "bad ifidx %d\n", ifp->idx);
+ brcmf_err("bad ifidx %d\n", ifp->idx);
netif_stop_queue(ndev);
return -ENODEV;
}
dev_kfree_skb(skb);
skb = skb2;
if (skb == NULL) {
- brcmf_dbg(ERROR, "%s: skb_realloc_headroom failed\n",
+ brcmf_err("%s: skb_realloc_headroom failed\n",
brcmf_ifname(drvr, ifp->idx));
ret = -ENOMEM;
goto done;
err = brcmf_fil_iovar_int_set(ifp, "toe_ol", toe_ol);
if (err < 0) {
- brcmf_dbg(ERROR, "Setting toe_ol failed, %d\n", err);
+ brcmf_err("Setting toe_ol failed, %d\n", err);
return err;
}
err = brcmf_fil_iovar_int_set(ifp, "toe", (toe_ol != 0));
if (err < 0)
- brcmf_dbg(ERROR, "Setting toe failed, %d\n", err);
+ brcmf_err("Setting toe failed, %d\n", err);
return err;
/* otherwise, require dongle to be up */
else if (!drvr->bus_if->drvr_up) {
- brcmf_dbg(ERROR, "dongle is not up\n");
+ brcmf_err("dongle is not up\n");
return -ENODEV;
}
/* finally, report dongle driver type */
/* If bus is not ready, can't continue */
if (bus_if->state != BRCMF_BUS_DATA) {
- brcmf_dbg(ERROR, "failed bus is not ready\n");
+ brcmf_err("failed bus is not ready\n");
return -EAGAIN;
}
netif_start_queue(ndev);
drvr->bus_if->drvr_up = true;
if (brcmf_cfg80211_up(ndev)) {
- brcmf_dbg(ERROR, "failed to bring up cfg80211\n");
+ brcmf_err("failed to bring up cfg80211\n");
return -1;
}
memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN);
if (register_netdev(ndev) != 0) {
- brcmf_dbg(ERROR, "couldn't register the net device\n");
+ brcmf_err("couldn't register the net device\n");
goto fail;
}
* in case we missed the BRCMF_E_IF_DEL event.
*/
if (ifp) {
- brcmf_dbg(ERROR, "ERROR: netdev:%s already exists\n",
+ brcmf_err("ERROR: netdev:%s already exists\n",
ifp->ndev->name);
if (ifidx) {
netif_stop_queue(ifp->ndev);
free_netdev(ifp->ndev);
drvr->iflist[ifidx] = NULL;
} else {
- brcmf_dbg(ERROR, "ignore IF event\n");
+ brcmf_err("ignore IF event\n");
return ERR_PTR(-EINVAL);
}
}
/* Allocate netdev, including space for private structure */
ndev = alloc_netdev(sizeof(struct brcmf_if), name, ether_setup);
if (!ndev) {
- brcmf_dbg(ERROR, "OOM - alloc_netdev\n");
+ brcmf_err("OOM - alloc_netdev\n");
return ERR_PTR(-ENOMEM);
}
ifp = drvr->iflist[ifidx];
if (!ifp) {
- brcmf_dbg(ERROR, "Null interface\n");
+ brcmf_err("Null interface\n");
return;
}
if (ifp->ndev) {
/* Attach and link in the protocol */
ret = brcmf_proto_attach(drvr);
if (ret != 0) {
- brcmf_dbg(ERROR, "brcmf_prot_attach failed\n");
+ brcmf_err("brcmf_prot_attach failed\n");
goto fail;
}
/* Bring up the bus */
ret = brcmf_bus_init(bus_if);
if (ret != 0) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_bus_init failed %d\n", ret);
+ brcmf_err("brcmf_sdbrcm_bus_init failed %d\n", ret);
return ret;
}
ret = brcmf_net_attach(ifp);
fail:
if (ret < 0) {
- brcmf_dbg(ERROR, "failed: %d\n", ret);
+ brcmf_err("failed: %d\n", ret);
if (drvr->config)
brcmf_cfg80211_detach(drvr->config);
free_netdev(drvr->iflist[0]->ndev);
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
clkreq, &err);
if (err) {
- brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
+ brcmf_err("HT Avail request error: %d\n", err);
return -EBADE;
}
clkctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err) {
- brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
+ brcmf_err("HT Avail read error: %d\n", err);
return -EBADE;
}
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
+ brcmf_err("Devctl error setting CA: %d\n",
err);
return -EBADE;
}
usleep_range(5000, 10000);
}
if (err) {
- brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
+ brcmf_err("HT Avail request error: %d\n", err);
return -EBADE;
}
if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
- brcmf_dbg(ERROR, "HT Avail timeout (%d): clkctl 0x%02x\n",
+ brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n",
PMU_MAX_TRANSITION_DLY, clkctl);
return -EBADE;
}
#if defined(DEBUG)
if (!bus->alp_only) {
if (SBSDIO_ALPONLY(clkctl))
- brcmf_dbg(ERROR, "HT Clock should be on\n");
+ brcmf_err("HT Clock should be on\n");
}
#endif /* defined (DEBUG) */
clkreq, &err);
brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
if (err) {
- brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
+ brcmf_err("Failed access turning clock off: %d\n",
err);
return -EBADE;
}
else if (bus->clkstate == CLK_AVAIL)
brcmf_sdbrcm_htclk(bus, false, false);
else
- brcmf_dbg(ERROR, "request for %d -> %d\n",
+ brcmf_err("request for %d -> %d\n",
bus->clkstate, target);
brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
break;
brcmf_dbg(INFO, "Dongle reports NAK handled, expect rtx of %d\n",
bus->rx_seq);
if (!bus->rxskip)
- brcmf_dbg(ERROR, "unexpected NAKHANDLED!\n");
+ brcmf_err("unexpected NAKHANDLED!\n");
bus->rxskip = false;
intstatus |= I_HMB_FRAME_IND;
(hmb_data & HMB_DATA_VERSION_MASK) >>
HMB_DATA_VERSION_SHIFT;
if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
- brcmf_dbg(ERROR, "Version mismatch, dongle reports %d, "
+ brcmf_err("Version mismatch, dongle reports %d, "
"expecting %d\n",
bus->sdpcm_ver, SDPCM_PROT_VERSION);
else
HMB_DATA_FC |
HMB_DATA_FWREADY |
HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
- brcmf_dbg(ERROR, "Unknown mailbox data content: 0x%02x\n",
+ brcmf_err("Unknown mailbox data content: 0x%02x\n",
hmb_data);
return intstatus;
u8 hi, lo;
int err;
- brcmf_dbg(ERROR, "%sterminate frame%s\n",
+ brcmf_err("%sterminate frame%s\n",
abort ? "abort command, " : "",
rtx ? ", send NAK" : "");
break;
if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
- brcmf_dbg(ERROR, "count growing: last 0x%04x now 0x%04x\n",
+ brcmf_err("count growing: last 0x%04x now 0x%04x\n",
lastrbc, (hi << 8) + lo);
}
lastrbc = (hi << 8) + lo;
}
if (!retries)
- brcmf_dbg(ERROR, "count never zeroed: last 0x%04x\n", lastrbc);
+ brcmf_err("count never zeroed: last 0x%04x\n", lastrbc);
else
brcmf_dbg(INFO, "flush took %d iterations\n", 0xffff - retries);
return -ENODATA;
}
if ((u16)(~(len ^ checksum))) {
- brcmf_dbg(ERROR, "HW header checksum error\n");
+ brcmf_err("HW header checksum error\n");
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
return -EIO;
}
if (len < SDPCM_HDRLEN) {
- brcmf_dbg(ERROR, "HW header length error\n");
+ brcmf_err("HW header length error\n");
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER &&
(roundup(len, bus->blocksize) != rd->len)) {
- brcmf_dbg(ERROR, "HW superframe header length error\n");
+ brcmf_err("HW superframe header length error\n");
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
- brcmf_dbg(ERROR, "HW subframe header length error\n");
+ brcmf_err("HW subframe header length error\n");
return -EPROTO;
}
rd->len = len;
*/
if (type == BRCMF_SDIO_FT_SUPER &&
SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
- brcmf_dbg(ERROR, "Glom descriptor found in superframe head\n");
+ brcmf_err("Glom descriptor found in superframe head\n");
rd->len = 0;
return -EINVAL;
}
rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
type != BRCMF_SDIO_FT_SUPER) {
- brcmf_dbg(ERROR, "HW header length too long\n");
+ brcmf_err("HW header length too long\n");
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->sdcnt.rx_toolong++;
brcmf_sdbrcm_rxfail(bus, false, false);
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
- brcmf_dbg(ERROR, "Wrong channel for superframe\n");
+ brcmf_err("Wrong channel for superframe\n");
rd->len = 0;
return -EINVAL;
}
if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
rd->channel != SDPCM_EVENT_CHANNEL) {
- brcmf_dbg(ERROR, "Wrong channel for subframe\n");
+ brcmf_err("Wrong channel for subframe\n");
rd->len = 0;
return -EINVAL;
}
rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
- brcmf_dbg(ERROR, "seq %d: bad data offset\n", rx_seq);
+ brcmf_err("seq %d: bad data offset\n", rx_seq);
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
rd->len = 0;
return -ENXIO;
}
if (rd->seq_num != rx_seq) {
- brcmf_dbg(ERROR, "seq %d: sequence number error, expect %d\n",
+ brcmf_err("seq %d: sequence number error, expect %d\n",
rx_seq, rd->seq_num);
bus->sdcnt.rx_badseq++;
rd->seq_num = rx_seq;
if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
/* only warm for NON glom packet */
if (rd->channel != SDPCM_GLOM_CHANNEL)
- brcmf_dbg(ERROR, "seq %d: next length error\n", rx_seq);
+ brcmf_err("seq %d: next length error\n", rx_seq);
rd->len_nxtfrm = 0;
}
fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]);
}
tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
- brcmf_dbg(ERROR, "seq %d: max tx seq number error\n", rx_seq);
+ brcmf_err("seq %d: max tx seq number error\n", rx_seq);
tx_seq_max = bus->tx_seq + 2;
}
bus->tx_max = tx_seq_max;
dlen = (u16) (bus->glomd->len);
dptr = bus->glomd->data;
if (!dlen || (dlen & 1)) {
- brcmf_dbg(ERROR, "bad glomd len(%d), ignore descriptor\n",
+ brcmf_err("bad glomd len(%d), ignore descriptor\n",
dlen);
dlen = 0;
}
dptr += sizeof(u16);
if ((sublen < SDPCM_HDRLEN) ||
((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
- brcmf_dbg(ERROR, "descriptor len %d bad: %d\n",
+ brcmf_err("descriptor len %d bad: %d\n",
num, sublen);
pnext = NULL;
break;
}
if (sublen % BRCMF_SDALIGN) {
- brcmf_dbg(ERROR, "sublen %d not multiple of %d\n",
+ brcmf_err("sublen %d not multiple of %d\n",
sublen, BRCMF_SDALIGN);
usechain = false;
}
/* Allocate/chain packet for next subframe */
pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
if (pnext == NULL) {
- brcmf_dbg(ERROR, "bcm_pkt_buf_get_skb failed, num %d len %d\n",
+ brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
num, sublen);
break;
}
bus->dataptr, dlen);
sublen = (u16) brcmf_sdbrcm_glom_from_buf(bus, dlen);
if (sublen != dlen) {
- brcmf_dbg(ERROR, "FAILED TO COPY, dlen %d sublen %d\n",
+ brcmf_err("FAILED TO COPY, dlen %d sublen %d\n",
dlen, sublen);
errcode = -1;
}
pnext = NULL;
} else {
- brcmf_dbg(ERROR, "COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
+ brcmf_err("COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
dlen);
errcode = -1;
}
/* On failure, kill the superframe, allow a couple retries */
if (errcode < 0) {
- brcmf_dbg(ERROR, "glom read of %d bytes failed: %d\n",
+ brcmf_err("glom read of %d bytes failed: %d\n",
dlen, errcode);
bus->sdiodev->bus_if->dstats.rx_errors++;
continue;
} else if (brcmf_proto_hdrpull(bus->sdiodev->dev,
&ifidx, pfirst) != 0) {
- brcmf_dbg(ERROR, "rx protocol error\n");
+ brcmf_err("rx protocol error\n");
bus->sdiodev->bus_if->dstats.rx_errors++;
skb_unlink(pfirst, &bus->glom);
brcmu_pkt_buf_free_skb(pfirst);
if (bus->rxblen)
buf = vzalloc(bus->rxblen);
if (!buf) {
- brcmf_dbg(ERROR, "no memory for control frame\n");
+ brcmf_err("no memory for control frame\n");
goto done;
}
rbuf = bus->rxbuf;
/* Drop if the read is too big or it exceeds our maximum */
if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
- brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
+ brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
rdlen, bus->sdiodev->bus_if->maxctl);
bus->sdiodev->bus_if->dstats.rx_errors++;
brcmf_sdbrcm_rxfail(bus, false, false);
}
if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
- brcmf_dbg(ERROR, "%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
+ brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
len, len - doff, bus->sdiodev->bus_if->maxctl);
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->sdcnt.rx_toolong++;
/* Control frame failures need retransmission */
if (sdret < 0) {
- brcmf_dbg(ERROR, "read %d control bytes failed: %d\n",
+ brcmf_err("read %d control bytes failed: %d\n",
rdlen, sdret);
bus->sdcnt.rxc_errors++;
brcmf_sdbrcm_rxfail(bus, true, true);
/* Point to valid data and indicate its length */
spin_lock_bh(&bus->rxctl_lock);
if (bus->rxctl) {
- brcmf_dbg(ERROR, "last control frame is being processed.\n");
+ brcmf_err("last control frame is being processed.\n");
spin_unlock_bh(&bus->rxctl_lock);
vfree(buf);
goto done;
BRCMF_FIRSTREAD);
bus->sdcnt.f2rxhdrs++;
if (sdret < 0) {
- brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n",
+ brcmf_err("RXHEADER FAILED: %d\n",
sdret);
bus->sdcnt.rx_hdrfail++;
brcmf_sdbrcm_rxfail(bus, true, true);
BRCMF_SDALIGN);
if (!pkt) {
/* Give up on data, request rtx of events */
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed\n");
+ brcmf_err("brcmu_pkt_buf_get_skb failed\n");
bus->sdiodev->bus_if->dstats.rx_dropped++;
brcmf_sdbrcm_rxfail(bus, false,
RETRYCHAN(rd->channel));
sdio_release_host(bus->sdiodev->func[1]);
if (sdret < 0) {
- brcmf_dbg(ERROR, "read %d bytes from channel %d failed: %d\n",
+ brcmf_err("read %d bytes from channel %d failed: %d\n",
rd->len, rd->channel, sdret);
brcmu_pkt_buf_free_skb(pkt);
bus->sdiodev->bus_if->dstats.rx_errors++;
}
bus->sdcnt.rx_readahead_cnt++;
if (rd->len != roundup(rd_new.len, 16)) {
- brcmf_dbg(ERROR, "frame length mismatch:read %d, should be %d\n",
+ brcmf_err("frame length mismatch:read %d, should be %d\n",
rd->len,
roundup(rd_new.len, 16) >> 4);
rd->len = 0;
"RxHdr:\n");
if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
- brcmf_dbg(ERROR, "readahead on control packet %d?\n",
+ brcmf_err("readahead on control packet %d?\n",
rd_new.seq_num);
/* Force retry w/normal header read */
rd->len = 0;
skb_pull(pkt, SDPCM_HDRLEN);
bus->glomd = pkt;
} else {
- brcmf_dbg(ERROR, "%s: glom superframe w/o "
+ brcmf_err("%s: glom superframe w/o "
"descriptor!\n", __func__);
sdio_claim_host(bus->sdiodev->func[1]);
brcmf_sdbrcm_rxfail(bus, false, false);
continue;
} else if (brcmf_proto_hdrpull(bus->sdiodev->dev, &ifidx,
pkt) != 0) {
- brcmf_dbg(ERROR, "rx protocol error\n");
+ brcmf_err("rx protocol error\n");
brcmu_pkt_buf_free_skb(pkt);
bus->sdiodev->bus_if->dstats.rx_errors++;
continue;
bus->sdiodev->bus_if->tx_realloc++;
new = brcmu_pkt_buf_get_skb(pkt->len + BRCMF_SDALIGN);
if (!new) {
- brcmf_dbg(ERROR, "couldn't allocate new %d-byte packet\n",
+ brcmf_err("couldn't allocate new %d-byte packet\n",
pkt->len + BRCMF_SDALIGN);
ret = -ENOMEM;
goto done;
(saveclk | SBSDIO_FORCE_HT), &err);
}
if (err)
- brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
+ brcmf_err("Failed to force clock for F2: err %d\n", err);
/* Turn off the bus (F2), free any pending packets */
brcmf_dbg(INTR, "disable SDIO interrupts\n");
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
+ brcmf_err("error reading DEVCTL: %d\n", err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
#endif /* DEBUG */
clkctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading CSR: %d\n",
+ brcmf_err("error reading CSR: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
+ brcmf_err("error reading DEVCTL: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
devctl, &err);
if (err) {
- brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
+ brcmf_err("error writing DEVCTL: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
/* Generally don't ask for these, can get CRC errors... */
if (intstatus & I_WR_OOSYNC) {
- brcmf_dbg(ERROR, "Dongle reports WR_OOSYNC\n");
+ brcmf_err("Dongle reports WR_OOSYNC\n");
intstatus &= ~I_WR_OOSYNC;
}
if (intstatus & I_RD_OOSYNC) {
- brcmf_dbg(ERROR, "Dongle reports RD_OOSYNC\n");
+ brcmf_err("Dongle reports RD_OOSYNC\n");
intstatus &= ~I_RD_OOSYNC;
}
if (intstatus & I_SBINT) {
- brcmf_dbg(ERROR, "Dongle reports SBINT\n");
+ brcmf_err("Dongle reports SBINT\n");
intstatus &= ~I_SBINT;
}
}
if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
- brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n");
+ brcmf_err("failed backplane access over SDIO, halting operation\n");
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
atomic_set(&bus->intstatus, 0);
} else if (atomic_read(&bus->intstatus) ||
skb_pull(pkt, SDPCM_HDRLEN);
brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
brcmu_pkt_buf_free_skb(pkt);
- brcmf_dbg(ERROR, "out of bus->txq !!!\n");
+ brcmf_err("out of bus->txq !!!\n");
ret = -ENOSR;
} else {
ret = 0;
/* Set the backplane window to include the start address */
bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev, address);
if (bcmerror) {
- brcmf_dbg(ERROR, "window change failed\n");
+ brcmf_err("window change failed\n");
goto xfer_done;
}
bcmerror = brcmf_sdcard_rwdata(bus->sdiodev, write,
sdaddr, data, dsize);
if (bcmerror) {
- brcmf_dbg(ERROR, "membytes transfer failed\n");
+ brcmf_err("membytes transfer failed\n");
break;
}
bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev,
address);
if (bcmerror) {
- brcmf_dbg(ERROR, "window change failed\n");
+ brcmf_err("window change failed\n");
break;
}
sdaddr = 0;
xfer_done:
/* Return the window to backplane enumeration space for core access */
if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, bus->sdiodev->sbwad))
- brcmf_dbg(ERROR, "FAILED to set window back to 0x%x\n",
+ brcmf_err("FAILED to set window back to 0x%x\n",
bus->sdiodev->sbwad);
sdio_release_host(bus->sdiodev->func[1]);
* NVRAM length at the end of memory should have been overwritten.
*/
if (!brcmf_sdio_valid_shared_address(addr)) {
- brcmf_dbg(ERROR, "invalid sdpcm_shared address 0x%08X\n",
+ brcmf_err("invalid sdpcm_shared address 0x%08X\n",
addr);
return -EINVAL;
}
sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
if ((sh->flags & SDPCM_SHARED_VERSION_MASK) != SDPCM_SHARED_VERSION) {
- brcmf_dbg(ERROR,
- "sdpcm_shared version mismatch: dhd %d dongle %d\n",
+ brcmf_err("sdpcm_shared version mismatch: dhd %d dongle %d\n",
SDPCM_SHARED_VERSION,
sh->flags & SDPCM_SHARED_VERSION_MASK);
return -EPROTO;
if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
brcmf_dbg(INFO, "firmware not built with -assert\n");
else if (sh.flags & SDPCM_SHARED_ASSERT)
- brcmf_dbg(ERROR, "assertion in dongle\n");
+ brcmf_err("assertion in dongle\n");
if (sh.flags & SDPCM_SHARED_TRAP)
- brcmf_dbg(ERROR, "firmware trap in dongle\n");
+ brcmf_err("firmware trap in dongle\n");
return 0;
}
brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
rxlen, msglen);
} else if (timeleft == 0) {
- brcmf_dbg(ERROR, "resumed on timeout\n");
+ brcmf_err("resumed on timeout\n");
brcmf_sdbrcm_checkdied(bus);
} else if (pending) {
brcmf_dbg(CTL, "cancelled\n");
bcmerror = brcmf_sdbrcm_membytes(bus, false, varaddr,
nvram_ularray, bus->varsz);
if (bcmerror) {
- brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
+ brcmf_err("error %d on reading %d nvram bytes at 0x%08x\n",
bcmerror, bus->varsz, varaddr);
}
/* Compare the org NVRAM with the one read from RAM */
if (memcmp(bus->vars, nvram_ularray, bus->varsz))
- brcmf_dbg(ERROR, "Downloaded NVRAM image is corrupted\n");
+ brcmf_err("Downloaded NVRAM image is corrupted\n");
else
- brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
+ brcmf_err("Download/Upload/Compare of NVRAM ok\n");
kfree(nvram_ularray);
#endif /* DEBUG */
}
} else {
if (!ci->iscoreup(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
- brcmf_dbg(ERROR, "SOCRAM core is down after reset?\n");
+ brcmf_err("SOCRAM core is down after reset?\n");
bcmerror = -EBADE;
goto fail;
}
bcmerror = brcmf_sdbrcm_write_vars(bus);
if (bcmerror) {
- brcmf_dbg(ERROR, "no vars written to RAM\n");
+ brcmf_err("no vars written to RAM\n");
bcmerror = 0;
}
ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
- brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
+ brcmf_err("Fail to request firmware %d\n", ret);
return ret;
}
bus->fw_ptr = 0;
brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus))) {
ret = brcmf_sdbrcm_membytes(bus, true, offset, memptr, len);
if (ret) {
- brcmf_dbg(ERROR, "error %d on writing %d membytes at 0x%08x\n",
+ brcmf_err("error %d on writing %d membytes at 0x%08x\n",
ret, MEMBLOCK, offset);
goto err;
}
ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
- brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
+ brcmf_err("Fail to request nvram %d\n", ret);
return ret;
}
/* Keep arm in reset */
if (brcmf_sdbrcm_download_state(bus, true)) {
- brcmf_dbg(ERROR, "error placing ARM core in reset\n");
+ brcmf_err("error placing ARM core in reset\n");
goto err;
}
/* External image takes precedence if specified */
if (brcmf_sdbrcm_download_code_file(bus)) {
- brcmf_dbg(ERROR, "dongle image file download failed\n");
+ brcmf_err("dongle image file download failed\n");
goto err;
}
/* External nvram takes precedence if specified */
if (brcmf_sdbrcm_download_nvram(bus))
- brcmf_dbg(ERROR, "dongle nvram file download failed\n");
+ brcmf_err("dongle nvram file download failed\n");
/* Take arm out of reset */
if (brcmf_sdbrcm_download_state(bus, false)) {
- brcmf_dbg(ERROR, "error getting out of ARM core reset\n");
+ brcmf_err("error getting out of ARM core reset\n");
goto err;
}
(saveclk | SBSDIO_FORCE_HT), &err);
}
if (err) {
- brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
+ brcmf_err("Failed to force clock for F2: err %d\n", err);
goto exit;
}
if (ret == 0) {
ret = brcmf_sdio_intr_register(bus->sdiodev);
if (ret != 0)
- brcmf_dbg(ERROR, "intr register failed:%d\n", ret);
+ brcmf_err("intr register failed:%d\n", ret);
}
/* If we didn't come up, turn off backplane clock */
brcmf_dbg(TRACE, "Enter\n");
if (!bus) {
- brcmf_dbg(ERROR, "bus is null pointer, exiting\n");
+ brcmf_err("bus is null pointer, exiting\n");
return;
}
if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
- brcmf_dbg(ERROR, "bus is down. we have nothing to do\n");
+ brcmf_err("bus is down. we have nothing to do\n");
return;
}
/* Count the interrupt call */
atomic_set(&bus->ipend, 1);
else
if (brcmf_sdio_intr_rstatus(bus)) {
- brcmf_dbg(ERROR, "failed backplane access\n");
+ brcmf_err("failed backplane access\n");
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
/* Disable additional interrupts (is this needed now)? */
if (!bus->intr)
- brcmf_dbg(ERROR, "isr w/o interrupt configured!\n");
+ brcmf_err("isr w/o interrupt configured!\n");
brcmf_sdbrcm_adddpctsk(bus);
queue_work(bus->brcmf_wq, &bus->datawork);
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
- brcmf_dbg(ERROR, "ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
+ brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
err, BRCMF_INIT_CLKCTL1, clkctl);
goto fail;
}
if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
- brcmf_dbg(ERROR, "brcmf_sdio_chip_attach failed!\n");
+ brcmf_err("brcmf_sdio_chip_attach failed!\n");
goto fail;
}
if (!brcmf_sdbrcm_chipmatch((u16) bus->ci->chip)) {
- brcmf_dbg(ERROR, "unsupported chip: 0x%04x\n", bus->ci->chip);
+ brcmf_err("unsupported chip: 0x%04x\n", bus->ci->chip);
goto fail;
}
/* Get info on the SOCRAM cores... */
bus->ramsize = bus->ci->ramsize;
if (!(bus->ramsize)) {
- brcmf_dbg(ERROR, "failed to find SOCRAM memory!\n");
+ brcmf_err("failed to find SOCRAM memory!\n");
goto fail;
}
INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
if (bus->brcmf_wq == NULL) {
- brcmf_dbg(ERROR, "insufficient memory to create txworkqueue\n");
+ brcmf_err("insufficient memory to create txworkqueue\n");
goto fail;
}
/* attempt to attach to the dongle */
if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_attach failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_attach failed\n");
goto fail;
}
/* Attach to the brcmf/OS/network interface */
ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
if (ret != 0) {
- brcmf_dbg(ERROR, "brcmf_attach failed\n");
+ brcmf_err("brcmf_attach failed\n");
goto fail;
}
/* Allocate buffers */
if (!(brcmf_sdbrcm_probe_malloc(bus))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_malloc failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_malloc failed\n");
goto fail;
}
if (!(brcmf_sdbrcm_probe_init(bus))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_init failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_init failed\n");
goto fail;
}
/* if firmware path present try to download and bring up bus */
ret = brcmf_bus_start(bus->sdiodev->dev);
if (ret != 0) {
- brcmf_dbg(ERROR, "dongle is not responding\n");
+ brcmf_err("dongle is not responding\n");
goto fail;
}
if (ifp->ndev && fweh->evt_handler[code])
err = fweh->evt_handler[code](ifp, emsg, data);
else
- brcmf_dbg(ERROR, "unhandled event %d ignored\n", code);
+ brcmf_err("unhandled event %d ignored\n", code);
} else {
- brcmf_dbg(ERROR, "no interface object\n");
+ brcmf_err("no interface object\n");
}
return err;
}
ifevent->bssidx, ifevent->flags);
if (ifevent->ifidx >= BRCMF_MAX_IFS) {
- brcmf_dbg(ERROR, "invalid interface index: %u\n",
+ brcmf_err("invalid interface index: %u\n",
ifevent->ifidx);
return;
}
err = brcmf_fweh_call_event_handler(ifp, event->code, &emsg,
event->data);
if (err) {
- brcmf_dbg(ERROR, "event handler failed (%d)\n",
+ brcmf_err("event handler failed (%d)\n",
event->code);
err = 0;
}
brcmf_fweh_handler_t handler)
{
if (drvr->fweh.evt_handler[code]) {
- brcmf_dbg(ERROR, "event code %d already registered\n", code);
+ brcmf_err("event code %d already registered\n", code);
return -ENOSPC;
}
drvr->fweh.evt_handler[code] = handler;
err = brcmf_fil_iovar_data_set(ifp, "event_msgs",
eventmask, BRCMF_EVENTING_MASK_LEN);
if (err)
- brcmf_dbg(ERROR, "Set event_msgs error (%d)\n", err);
+ brcmf_err("Set event_msgs error (%d)\n", err);
return err;
}
s32 err;
if (drvr->bus_if->state != BRCMF_BUS_DATA) {
- brcmf_dbg(ERROR, "bus is down. we have nothing to do.\n");
+ brcmf_err("bus is down. we have nothing to do.\n");
return -EIO;
}
if (err >= 0)
err = 0;
else
- brcmf_dbg(ERROR, "Failed err=%d\n", err);
+ brcmf_err("Failed err=%d\n", err);
return err;
}
buflen, true);
} else {
err = -EPERM;
- brcmf_dbg(ERROR, "Creating iovar failed\n");
+ brcmf_err("Creating iovar failed\n");
}
mutex_unlock(&drvr->proto_block);
memcpy(data, drvr->proto_buf, len);
} else {
err = -EPERM;
- brcmf_dbg(ERROR, "Creating iovar failed\n");
+ brcmf_err("Creating iovar failed\n");
}
brcmf_dbg(FIL, "name=%s, len=%d\n", name, len);
iolen = prefixlen + namelen + sizeof(bssidx_le) + datalen;
if (buflen < iolen) {
- brcmf_dbg(ERROR, "buffer is too short\n");
+ brcmf_err("buffer is too short\n");
return 0;
}
buflen, true);
} else {
err = -EPERM;
- brcmf_dbg(ERROR, "Creating bsscfg failed\n");
+ brcmf_err("Creating bsscfg failed\n");
}
mutex_unlock(&drvr->proto_block);
memcpy(data, drvr->proto_buf, len);
} else {
err = -EPERM;
- brcmf_dbg(ERROR, "Creating bsscfg failed\n");
+ brcmf_err("Creating bsscfg failed\n");
}
brcmf_dbg(FIL, "bssidx=%d, name=%s, len=%d\n", ifp->bssidx, name, len);
brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
CORE_SB(base, sbtmstatehigh),
NULL);
if (regdata & SSB_TMSHIGH_BUSY)
- brcmf_dbg(ERROR, "core state still busy\n");
+ brcmf_err("core state still busy\n");
regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow),
NULL);
ci->ramsize = 0x80000;
break;
default:
- brcmf_dbg(ERROR, "chipid 0x%x is not supported\n", ci->chip);
+ brcmf_err("chipid 0x%x is not supported\n", ci->chip);
return -ENODEV;
}
ci->resetcore = brcmf_sdio_ai_resetcore;
break;
default:
- brcmf_dbg(ERROR, "socitype %u not supported\n", ci->socitype);
+ brcmf_err("socitype %u not supported\n", ci->socitype);
return -ENODEV;
}
clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
if (err) {
- brcmf_dbg(ERROR, "error writing for HT off\n");
+ brcmf_err("error writing for HT off\n");
return err;
}
SBSDIO_FUNC1_CHIPCLKCSR, NULL);
if ((clkval & ~SBSDIO_AVBITS) != clkset) {
- brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
+ brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
clkset, clkval);
return -EACCES;
}
!SBSDIO_ALPAV(clkval)),
PMU_MAX_TRANSITION_DLY);
if (!SBSDIO_ALPAV(clkval)) {
- brcmf_dbg(ERROR, "timeout on ALPAV wait, clkval 0x%02x\n",
+ brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
clkval);
return -EBUSY;
}
str_shift = 11;
break;
default:
- brcmf_dbg(ERROR, "No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
+ brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
brcmf_sdio_chip_name(ci->chip, chn, 8),
ci->chiprev, ci->pmurev);
break;
ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
if (ret < 0)
- brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret);
+ brcmf_err("usb_submit_urb failed %d\n", ret);
return ret;
}
ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
if (ret < 0)
- brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret);
+ brcmf_err("usb_submit_urb failed %d\n", ret);
return ret;
}
devinfo->ctl_completed = false;
err = brcmf_usb_send_ctl(devinfo, buf, len);
if (err) {
- brcmf_dbg(ERROR, "fail %d bytes: %d\n", err, len);
+ brcmf_err("fail %d bytes: %d\n", err, len);
clear_bit(0, &devinfo->ctl_op);
return err;
}
timeout = brcmf_usb_ioctl_resp_wait(devinfo);
clear_bit(0, &devinfo->ctl_op);
if (!timeout) {
- brcmf_dbg(ERROR, "Txctl wait timed out\n");
+ brcmf_err("Txctl wait timed out\n");
err = -EIO;
}
return err;
devinfo->ctl_completed = false;
err = brcmf_usb_recv_ctl(devinfo, buf, len);
if (err) {
- brcmf_dbg(ERROR, "fail %d bytes: %d\n", err, len);
+ brcmf_err("fail %d bytes: %d\n", err, len);
clear_bit(0, &devinfo->ctl_op);
return err;
}
err = devinfo->ctl_urb_status;
clear_bit(0, &devinfo->ctl_op);
if (!timeout) {
- brcmf_dbg(ERROR, "rxctl wait timed out\n");
+ brcmf_err("rxctl wait timed out\n");
err = -EIO;
}
if (!err)
reqs = kzalloc(sizeof(struct brcmf_usbreq) * qsize, GFP_ATOMIC);
if (reqs == NULL) {
- brcmf_dbg(ERROR, "fail to allocate memory!\n");
+ brcmf_err("fail to allocate memory!\n");
return NULL;
}
req = reqs;
}
return reqs;
fail:
- brcmf_dbg(ERROR, "fail!\n");
+ brcmf_err("fail!\n");
while (!list_empty(q)) {
req = list_entry(q->next, struct brcmf_usbreq, list);
if (req && req->urb)
int i = 0;
list_for_each_entry_safe(req, next, q, list) {
if (!req->urb) {
- brcmf_dbg(ERROR, "bad req\n");
+ brcmf_err("bad req\n");
break;
}
i++;
if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
skb_put(skb, urb->actual_length);
if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
- brcmf_dbg(ERROR, "rx protocol error\n");
+ brcmf_err("rx protocol error\n");
brcmu_pkt_buf_free_skb(skb);
devinfo->bus_pub.bus->dstats.rx_errors++;
} else
struct brcmf_usbreq *req;
if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
- brcmf_dbg(ERROR, "bus is not up=%d\n", devinfo->bus_pub.state);
+ brcmf_err("bus is not up=%d\n", devinfo->bus_pub.state);
return;
}
while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL)
}
if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN) {
- brcmf_dbg(ERROR, "intr cb when DBUS down, ignoring\n");
+ brcmf_err("intr cb when DBUS down, ignoring\n");
return;
}
if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
err = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
if (err)
- brcmf_dbg(ERROR, "usb_submit_urb, err=%d\n", err);
+ brcmf_err("usb_submit_urb, err=%d\n", err);
}
}
&devinfo->tx_freecount);
if (!req) {
brcmu_pkt_buf_free_skb(skb);
- brcmf_dbg(ERROR, "no req to send\n");
+ brcmf_err("no req to send\n");
return -ENOMEM;
}
brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
if (ret) {
- brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n");
+ brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n");
brcmf_usb_del_fromq(devinfo, req);
brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
ret = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
if (ret) {
- brcmf_dbg(ERROR, "USB_SUBMIT_URB failed with status %d\n",
+ brcmf_err("USB_SUBMIT_URB failed with status %d\n",
ret);
return -EINVAL;
}
devinfo->ctl_completed = false;
ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
if (ret < 0) {
- brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret);
+ brcmf_err("usb_submit_urb failed %d\n", ret);
kfree(tmpbuf);
return false;
}
brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
return 0;
} else {
- brcmf_dbg(ERROR, "Cannot talk to Dongle. Firmware is not UP, %d ms\n",
+ brcmf_err("Cannot talk to Dongle. Firmware is not UP, %d ms\n",
BRCMF_USB_RESET_GETVER_SPINWAIT * loop_cnt);
return -EINVAL;
}
devinfo->ctl_completed = false;
ret = usb_submit_urb(devinfo->bulk_urb, GFP_ATOMIC);
if (ret) {
- brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret);
+ brcmf_err("usb_submit_urb failed %d\n", ret);
return ret;
}
ret = brcmf_usb_ioctl_resp_wait(devinfo);
/* 2) Check we are in the Waiting state */
if (rdlstate != DL_WAITING) {
- brcmf_dbg(ERROR, "Failed to DL_START\n");
+ brcmf_err("Failed to DL_START\n");
err = -EINVAL;
goto fail;
}
memcpy(bulkchunk, dlpos, sendlen);
if (brcmf_usb_dl_send_bulk(devinfo, bulkchunk,
sendlen)) {
- brcmf_dbg(ERROR, "send_bulk failed\n");
+ brcmf_err("send_bulk failed\n");
err = -EINVAL;
goto fail;
}
}
if (!brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
sizeof(struct rdl_state_le))) {
- brcmf_dbg(ERROR, "DL_GETSTATE Failed xxxx\n");
+ brcmf_err("DL_GETSTATE Failed xxxx\n");
err = -EINVAL;
goto fail;
}
/* restart if an error is reported */
if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) {
- brcmf_dbg(ERROR, "Bad Hdr or Bad CRC state %d\n",
+ brcmf_err("Bad Hdr or Bad CRC state %d\n",
rdlstate);
err = -EINVAL;
goto fail;
return -ENODEV;
/* The Dongle may go for re-enumeration. */
} else {
- brcmf_dbg(ERROR, "Dongle not runnable\n");
+ brcmf_err("Dongle not runnable\n");
return -EINVAL;
}
brcmf_dbg(USB, "Exit\n");
chiprev = devinfo->bus_pub.chiprev;
if (!brcmf_usb_chip_support(devid, chiprev)) {
- brcmf_dbg(ERROR, "unsupported chip %d rev %d\n",
+ brcmf_err("unsupported chip %d rev %d\n",
devid, chiprev);
return -EINVAL;
}
if (!devinfo->image) {
- brcmf_dbg(ERROR, "No firmware!\n");
+ brcmf_err("No firmware!\n");
return -ENOENT;
}
/* fw image not yet loaded. Load it now and add to list */
err = request_firmware(&fw, fwname, devinfo->dev);
if (!fw) {
- brcmf_dbg(ERROR, "fail to request firmware %s\n", fwname);
+ brcmf_err("fail to request firmware %s\n", fwname);
return err;
}
if (check_file(fw->data) < 0) {
- brcmf_dbg(ERROR, "invalid firmware %s\n", fwname);
+ brcmf_err("invalid firmware %s\n", fwname);
return -EINVAL;
}
devinfo->intr_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!devinfo->intr_urb) {
- brcmf_dbg(ERROR, "usb_alloc_urb (intr) failed\n");
+ brcmf_err("usb_alloc_urb (intr) failed\n");
goto error;
}
devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!devinfo->ctl_urb) {
- brcmf_dbg(ERROR, "usb_alloc_urb (ctl) failed\n");
+ brcmf_err("usb_alloc_urb (ctl) failed\n");
goto error;
}
devinfo->bulk_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!devinfo->bulk_urb) {
- brcmf_dbg(ERROR, "usb_alloc_urb (bulk) failed\n");
+ brcmf_err("usb_alloc_urb (bulk) failed\n");
goto error;
}
return &devinfo->bus_pub;
error:
- brcmf_dbg(ERROR, "failed!\n");
+ brcmf_err("failed!\n");
brcmf_usb_detach(devinfo);
return NULL;
}
/* Attach to the common driver interface */
ret = brcmf_attach(0, dev);
if (ret) {
- brcmf_dbg(ERROR, "brcmf_attach failed\n");
+ brcmf_err("brcmf_attach failed\n");
goto fail;
}
ret = brcmf_bus_start(dev);
if (ret) {
- brcmf_dbg(ERROR, "dongle is not responding\n");
+ brcmf_err("dongle is not responding\n");
brcmf_detach(dev);
goto fail;
}
if (IFDESC(usb, CONTROL_IF).bInterfaceClass != USB_CLASS_VENDOR_SPEC ||
IFDESC(usb, CONTROL_IF).bInterfaceSubClass != 2 ||
IFDESC(usb, CONTROL_IF).bInterfaceProtocol != 0xff) {
- brcmf_dbg(ERROR, "invalid control interface: class %d, subclass %d, proto %d\n",
+ brcmf_err("invalid control interface: class %d, subclass %d, proto %d\n",
IFDESC(usb, CONTROL_IF).bInterfaceClass,
IFDESC(usb, CONTROL_IF).bInterfaceSubClass,
IFDESC(usb, CONTROL_IF).bInterfaceProtocol);
endpoint = &IFEPDESC(usb, CONTROL_IF, 0);
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT) {
- brcmf_dbg(ERROR, "invalid control endpoint %d\n",
+ brcmf_err("invalid control endpoint %d\n",
endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
ret = -1;
goto fail;
endpoint = &IFEPDESC(usb, BULK_IF, ep);
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
USB_ENDPOINT_XFER_BULK) {
- brcmf_dbg(ERROR, "invalid data endpoint %d\n", ep);
+ brcmf_err("invalid data endpoint %d\n", ep);
ret = -1;
goto fail;
}
return 0;
fail:
- brcmf_dbg(ERROR, "failed with errno %d\n", ret);
+ brcmf_err("failed with errno %d\n", ret);
kfree(devinfo);
usb_set_intfdata(intf, NULL);
return ret;
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff