tg3: Pull phy int lpbk setup into separate func

This patch pulls out the internal phy loopback setup code into a
separate function.  This cleans up the loopback test code and makes it
available for NETIF_F_LOOPBACK support later.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index abe2ec3c00222f27c2a3fbefda1d3e324e3defd9..08953b0999d20505c0978430b35d7d7f0e8b7e2b 100644 (file)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6370,6 +6370,80 @@ static void tg3_mac_loopback(struct tg3 *tp, bool enable)
        udelay(40);
 }
 
+static void tg3_phy_lpbk_set(struct tg3 *tp, u32 speed)
+{
+       u32 val, bmcr, mac_mode;
+
+       tg3_phy_toggle_apd(tp, false);
+       tg3_phy_toggle_automdix(tp, 0);
+
+       bmcr = BMCR_LOOPBACK | BMCR_FULLDPLX;
+       switch (speed) {
+       case SPEED_10:
+               break;
+       case SPEED_100:
+               bmcr |= BMCR_SPEED100;
+               break;
+       case SPEED_1000:
+       default:
+               if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
+                       speed = SPEED_100;
+                       bmcr |= BMCR_SPEED100;
+               } else {
+                       speed = SPEED_1000;
+                       bmcr |= BMCR_SPEED1000;
+               }
+       }
+
+       tg3_writephy(tp, MII_BMCR, bmcr);
+
+       /* The write needs to be flushed for the FETs */
+       if (tp->phy_flags & TG3_PHYFLG_IS_FET)
+               tg3_readphy(tp, MII_BMCR, &bmcr);
+
+       udelay(40);
+
+       if ((tp->phy_flags & TG3_PHYFLG_IS_FET) &&
+           GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
+               tg3_writephy(tp, MII_TG3_FET_PTEST,
+                            MII_TG3_FET_PTEST_FRC_TX_LINK |
+                            MII_TG3_FET_PTEST_FRC_TX_LOCK);
+
+               /* The write needs to be flushed for the AC131 */
+               tg3_readphy(tp, MII_TG3_FET_PTEST, &val);
+       }
+
+       /* Reset to prevent losing 1st rx packet intermittently */
+       if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
+           tg3_flag(tp, 5780_CLASS)) {
+               tw32_f(MAC_RX_MODE, RX_MODE_RESET);
+               udelay(10);
+               tw32_f(MAC_RX_MODE, tp->rx_mode);
+       }
+
+       mac_mode = tp->mac_mode &
+                  ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
+       if (speed == SPEED_1000)
+               mac_mode |= MAC_MODE_PORT_MODE_GMII;
+       else
+               mac_mode |= MAC_MODE_PORT_MODE_MII;
+
+       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
+               u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK;
+
+               if (masked_phy_id == TG3_PHY_ID_BCM5401)
+                       mac_mode &= ~MAC_MODE_LINK_POLARITY;
+               else if (masked_phy_id == TG3_PHY_ID_BCM5411)
+                       mac_mode |= MAC_MODE_LINK_POLARITY;
+
+               tg3_writephy(tp, MII_TG3_EXT_CTRL,
+                            MII_TG3_EXT_CTRL_LNK3_LED_MODE);
+       }
+
+       tw32(MAC_MODE, mac_mode);
+       udelay(40);
+}
+
 static void tg3_set_loopback(struct net_device *dev, u32 features)
 {
        struct tg3 *tp = netdev_priv(dev);
@@ -11265,7 +11339,7 @@ static const u8 tg3_tso_header[] = {
 
 static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
 {
-       u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
+       u32 rx_start_idx, rx_idx, tx_idx, opaque_key;
        u32 base_flags = 0, mss = 0, desc_idx, coal_now, data_off, val;
        u32 budget;
        struct sk_buff *skb, *rx_skb;
@@ -11286,56 +11360,6 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
        }
        coal_now = tnapi->coal_now | rnapi->coal_now;
 
-       if (loopback_mode != TG3_MAC_LOOPBACK) {
-               if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
-                       tg3_phy_fet_toggle_apd(tp, false);
-                       val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
-               } else
-                       val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
-
-               tg3_phy_toggle_automdix(tp, 0);
-
-               tg3_writephy(tp, MII_BMCR, val);
-               udelay(40);
-
-               mac_mode = tp->mac_mode &
-                          ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
-               if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
-                       tg3_writephy(tp, MII_TG3_FET_PTEST,
-                                    MII_TG3_FET_PTEST_FRC_TX_LINK |
-                                    MII_TG3_FET_PTEST_FRC_TX_LOCK);
-                       /* The write needs to be flushed for the AC131 */
-                       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
-                               tg3_readphy(tp, MII_TG3_FET_PTEST, &val);
-                       mac_mode |= MAC_MODE_PORT_MODE_MII;
-               } else
-                       mac_mode |= MAC_MODE_PORT_MODE_GMII;
-
-               /* reset to prevent losing 1st rx packet intermittently */
-               if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
-                       tw32_f(MAC_RX_MODE, RX_MODE_RESET);
-                       udelay(10);
-                       tw32_f(MAC_RX_MODE, tp->rx_mode);
-               }
-               if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
-                       u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK;
-                       if (masked_phy_id == TG3_PHY_ID_BCM5401)
-                               mac_mode &= ~MAC_MODE_LINK_POLARITY;
-                       else if (masked_phy_id == TG3_PHY_ID_BCM5411)
-                               mac_mode |= MAC_MODE_LINK_POLARITY;
-                       tg3_writephy(tp, MII_TG3_EXT_CTRL,
-                                    MII_TG3_EXT_CTRL_LNK3_LED_MODE);
-               }
-               tw32(MAC_MODE, mac_mode);
-
-               /* Wait for link */
-               for (i = 0; i < 100; i++) {
-                       if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
-                               break;
-                       mdelay(1);
-               }
-       }
-
        err = -EIO;
 
        tx_len = pktsz;
@@ -11547,10 +11571,6 @@ static int tg3_test_loopback(struct tg3 *tp)
                        tw32(i, 0x0);
        }
 
-       /* Turn off gphy autopowerdown. */
-       if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
-               tg3_phy_toggle_apd(tp, false);
-
        /* HW errata - mac loopback fails in some cases on 5780.
         * Normal traffic and PHY loopback are not affected by
         * errata.  Also, the MAC loopback test is deprecated for
@@ -11574,6 +11594,17 @@ static int tg3_test_loopback(struct tg3 *tp)
 
        if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
            !tg3_flag(tp, USE_PHYLIB)) {
+               int i;
+
+               tg3_phy_lpbk_set(tp, 0);
+
+               /* Wait for link */
+               for (i = 0; i < 100; i++) {
+                       if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
+                               break;
+                       mdelay(1);
+               }
+
                if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_PHY_LOOPBACK))
                        err |= TG3_STD_LOOPBACK_FAILED <<
                               TG3_PHY_LOOPBACK_SHIFT;
@@ -11585,11 +11616,11 @@ static int tg3_test_loopback(struct tg3 *tp)
                    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_PHY_LOOPBACK))
                        err |= TG3_JMB_LOOPBACK_FAILED <<
                               TG3_PHY_LOOPBACK_SHIFT;
-       }
 
-       /* Re-enable gphy autopowerdown. */
-       if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
-               tg3_phy_toggle_apd(tp, true);
+               /* Re-enable gphy autopowerdown. */
+               if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
+                       tg3_phy_toggle_apd(tp, true);
+       }
 
 done:
        tp->phy_flags |= eee_cap;