-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_IDPROM_H
-#define _SPARC64_IDPROM_H
-
-#include <linux/types.h>
-
-struct idprom {
- u8 id_format; /* Format identifier (always 0x01) */
- u8 id_machtype; /* Machine type */
- u8 id_ethaddr[6]; /* Hardware ethernet address */
- s32 id_date; /* Date of manufacture */
- u32 id_sernum:24; /* Unique serial number */
- u8 id_cksum; /* Checksum - xor of the data bytes */
- u8 reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#endif /* !(_SPARC_IDPROM_H) */
+#include <asm-sparc/idprom.h>
-/*
- * include/asm-sparc64/sunbpp.h
- */
-
-#ifndef _ASM_SPARC64_SUNBPP_H
-#define _ASM_SPARC64_SUNBPP_H
-
-struct bpp_regs {
- /* DMA registers */
- __volatile__ __u32 p_csr; /* DMA Control/Status Register */
- __volatile__ __u32 p_addr; /* Address Register */
- __volatile__ __u32 p_bcnt; /* Byte Count Register */
- __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */
- /* Parallel Port registers */
- __volatile__ __u16 p_hcr; /* Hardware Configuration Register */
- __volatile__ __u16 p_ocr; /* Operation Configuration Register */
- __volatile__ __u8 p_dr; /* Parallel Data Register */
- __volatile__ __u8 p_tcr; /* Transfer Control Register */
- __volatile__ __u8 p_or; /* Output Register */
- __volatile__ __u8 p_ir; /* Input Register */
- __volatile__ __u16 p_icr; /* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
-#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
-#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR 0x8000
-#define P_OCR_DATA_SRC 0x4000 /* ) */
-#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
-#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
-#define P_OCR_ACK_DSEL 0x0800 /* ) */
-#define P_OCR_EN_DIAG 0x0400
-#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
-#define P_OCR_ACK_OP 0x0100 /* Ack operation */
-#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR 0x08
-#define P_TCR_BUSY 0x04
-#define P_TCR_ACK 0x02
-#define P_TCR_DS 0x01 /* Strobe */
-
-/* P_OR */
-#define P_OR_V3 0x20 /* ) */
-#define P_OR_V2 0x10 /* ) on Zebra only */
-#define P_OR_V1 0x08 /* ) */
-#define P_OR_INIT 0x04
-#define P_OR_AFXN 0x02 /* Auto Feed */
-#define P_OR_SLCT_IN 0x01
-
-/* P_IR */
-#define P_IR_PE 0x04
-#define P_IR_SLCT 0x02
-#define P_IR_ERR 0x01
-
-/* P_ICR */
-#define P_DS_IRQ 0x8000 /* RW1 */
-#define P_ACK_IRQ 0x4000 /* RW1 */
-#define P_BUSY_IRQ 0x2000 /* RW1 */
-#define P_PE_IRQ 0x1000 /* RW1 */
-#define P_SLCT_IRQ 0x0800 /* RW1 */
-#define P_ERR_IRQ 0x0400 /* RW1 */
-#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
-#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
-#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
-#define P_BUSY_IRQ_EN 0x0040 /* RW */
-#define P_PE_IRP 0x0020 /* RW 1= rising edge */
-#define P_PE_IRQ_EN 0x0010 /* RW */
-#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
-#define P_SLCT_IRQ_EN 0x0004 /* RW */
-#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
-#define P_ERR_IRQ_EN 0x0001 /* RW */
-
-#endif /* !(_ASM_SPARC64_SUNBPP_H) */
+#include <asm-sparc/sunbpp.h>