[PATCH] skge: fibre vs copper detection cleanup
authorStephen Hemminger <shemminger@osdl.org>
Tue, 16 Aug 2005 21:00:58 +0000 (14:00 -0700)
committerJeff Garzik <jgarzik@pobox.com>
Tue, 16 Aug 2005 21:03:13 +0000 (17:03 -0400)
Cleanup the code that handles fibre vs copper detection.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
 drivers/net/skge.c |   26 ++++++++++++--------------
 drivers/net/skge.h |   11 ++---------
 2 files changed, 14 insertions(+), 23 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/skge.c
drivers/net/skge.h

index 9ff1261f07ca3fa6e5c1594e2921c68a6a22eb6f..3990829d3c4693e4ecc0b6505a015554d8fa7af3 100644 (file)
@@ -189,7 +189,7 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
 {
        u32 supported;
 
-       if (iscopper(hw)) {
+       if (hw->copper) {
                supported = SUPPORTED_10baseT_Half
                        | SUPPORTED_10baseT_Full
                        | SUPPORTED_100baseT_Half
@@ -222,7 +222,7 @@ static int skge_get_settings(struct net_device *dev,
        ecmd->transceiver = XCVR_INTERNAL;
        ecmd->supported = skge_supported_modes(hw);
 
-       if (iscopper(hw)) {
+       if (hw->copper) {
                ecmd->port = PORT_TP;
                ecmd->phy_address = hw->phy_addr;
        } else
@@ -1599,7 +1599,7 @@ static void yukon_init(struct skge_hw *hw, int port)
        adv = PHY_AN_CSMA;
 
        if (skge->autoneg == AUTONEG_ENABLE) {
-               if (iscopper(hw)) {
+               if (hw->copper) {
                        if (skge->advertising & ADVERTISED_1000baseT_Full)
                                ct1000 |= PHY_M_1000C_AFD;
                        if (skge->advertising & ADVERTISED_1000baseT_Half)
@@ -1691,7 +1691,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
        /* Set hardware config mode */
        reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
                GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE;
-       reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
+       reg |= hw->copper ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
 
        /* Clear GMC reset */
        skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
@@ -2865,7 +2865,7 @@ static const char *skge_board_name(const struct skge_hw *hw)
 static int skge_reset(struct skge_hw *hw)
 {
        u16 ctst;
-       u8 t8, mac_cfg;
+       u8 t8, mac_cfg, pmd_type, phy_type;
        int i;
 
        ctst = skge_read16(hw, B0_CTST);
@@ -2884,18 +2884,19 @@ static int skge_reset(struct skge_hw *hw)
                     ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA));
 
        hw->chip_id = skge_read8(hw, B2_CHIP_ID);
-       hw->phy_type = skge_read8(hw, B2_E_1) & 0xf;
-       hw->pmd_type = skge_read8(hw, B2_PMD_TYP);
+       phy_type = skge_read8(hw, B2_E_1) & 0xf;
+       pmd_type = skge_read8(hw, B2_PMD_TYP);
+       hw->copper = (pmd_type == 'T' || pmd_type == '1');
 
        switch (hw->chip_id) {
        case CHIP_ID_GENESIS:
-               switch (hw->phy_type) {
+               switch (phy_type) {
                case SK_PHY_BCOM:
                        hw->phy_addr = PHY_ADDR_BCOM;
                        break;
                default:
                        printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
-                              pci_name(hw->pdev), hw->phy_type);
+                              pci_name(hw->pdev), phy_type);
                        return -EOPNOTSUPP;
                }
                break;
@@ -2903,13 +2904,10 @@ static int skge_reset(struct skge_hw *hw)
        case CHIP_ID_YUKON:
        case CHIP_ID_YUKON_LITE:
        case CHIP_ID_YUKON_LP:
-               if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S')
-                       hw->phy_type = SK_PHY_MARV_COPPER;
+               if (phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S')
+                       hw->copper = 1;
 
                hw->phy_addr = PHY_ADDR_MARV;
-               if (!iscopper(hw))
-                       hw->phy_type = SK_PHY_MARV_FIBER;
-
                break;
 
        default:
index 636729fcbbaae82d36a0a0cc3ccaab16c858b66b..f1680beb8e68a903d22228755bc84526656d4b1e 100644 (file)
@@ -2460,24 +2460,17 @@ struct skge_hw {
 
        u8                   chip_id;
        u8                   chip_rev;
-       u8                   phy_type;
-       u8                   pmd_type;
-       u16                  phy_addr;
+       u8                   copper;
        u8                   ports;
 
        u32                  ram_size;
        u32                  ram_offset;
+       u16                  phy_addr;
 
        struct tasklet_struct ext_tasklet;
        spinlock_t           phy_lock;
 };
 
-
-static inline int iscopper(const struct skge_hw *hw)
-{
-       return (hw->pmd_type == 'T');
-}
-
 enum {
        FLOW_MODE_NONE          = 0, /* No Flow-Control */
        FLOW_MODE_LOC_SEND      = 1, /* Local station sends PAUSE */