Revert "tty/serial/8250: use mctrl_gpio helpers"
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tue, 16 Aug 2016 12:06:54 +0000 (15:06 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 31 Aug 2016 13:36:01 +0000 (15:36 +0200)
Serial console is broken in v4.8-rcX. Mika and I independently bisected down to
commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers").

Since neither author nor anyone else didn't propose a solution we better revert
it for now.

This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341.

Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/serial/8250.txt
drivers/tty/serial/8250/8250.h
drivers/tty/serial/8250/8250_core.c
drivers/tty/serial/8250/8250_omap.c
drivers/tty/serial/8250/8250_port.c
drivers/tty/serial/8250/Kconfig
include/linux/serial_8250.h

index f5561ac7e17ed358ce7e6a00c7c0f8913f3464c6..936ab5b87324ce7cf022320a777342d2507dfd19 100644 (file)
@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
                interrupts = <10>;
                reg-shift = <2>;
        };
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-       uart4: serial@49042000 {
-               compatible = "ti,omap3-uart";
-               reg = <0x49042000 0x400>;
-               interrupts = <80>;
-               ti,hwmods = "uart4";
-               clock-frequency = <48000000>;
-               cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-               rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-               dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-               dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-               dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-               rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-       };
index 122e0e4029fee9e42f4b1ba37f0439728f0d54a4..1a16feac9a36070715bbe26974661b823e3c08ab 100644 (file)
@@ -15,8 +15,6 @@
 #include <linux/serial_reg.h>
 #include <linux/dmaengine.h>
 
-#include "../serial_mctrl_gpio.h"
-
 struct uart_8250_dma {
        int (*tx_dma)(struct uart_8250_port *p);
        int (*rx_dma)(struct uart_8250_port *p);
@@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p);
 
 static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
 {
-       int mctrl_gpio = 0;
-
        serial_out(up, UART_MCR, value);
-
-       if (value & UART_MCR_RTS)
-               mctrl_gpio |= TIOCM_RTS;
-       if (value & UART_MCR_DTR)
-               mctrl_gpio |= TIOCM_DTR;
-
-       mctrl_gpio_set(up->gpios, mctrl_gpio);
 }
 
 static inline int serial8250_in_MCR(struct uart_8250_port *up)
 {
-       int mctrl, mctrl_gpio = 0;
-
-       mctrl = serial_in(up, UART_MCR);
-
-       /* save current MCR values */
-       if (mctrl & UART_MCR_RTS)
-               mctrl_gpio |= TIOCM_RTS;
-       if (mctrl & UART_MCR_DTR)
-               mctrl_gpio |= TIOCM_DTR;
-
-       mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
-
-       if (mctrl_gpio & TIOCM_RTS)
-               mctrl |= UART_MCR_RTS;
-       else
-               mctrl &= ~UART_MCR_RTS;
-
-       if (mctrl_gpio & TIOCM_DTR)
-               mctrl |= UART_MCR_DTR;
-       else
-               mctrl &= ~UART_MCR_DTR;
-
-       return mctrl;
+       return serial_in(up, UART_MCR);
 }
 
 #if defined(__alpha__) && !defined(CONFIG_PCI)
index 13ad5c3d2e681893aeaa0d675d17c9f04f06b967..dcf43f66404f12d2bd290a30adfe494dd056162e 100644 (file)
@@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 
        uart = serial8250_find_match_or_unused(&up->port);
        if (uart && uart->port.type != PORT_8250_CIR) {
-               struct mctrl_gpios *gpios;
-
                if (uart->port.dev)
                        uart_remove_one_port(&serial8250_reg, &uart->port);
 
@@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
                if (up->port.flags & UPF_FIXED_TYPE)
                        uart->port.type = up->port.type;
 
-               gpios = mctrl_gpio_init(&uart->port, 0);
-               if (IS_ERR(gpios)) {
-                       if (PTR_ERR(gpios) != -ENOSYS)
-                               return PTR_ERR(gpios);
-               } else
-                       uart->gpios = gpios;
-
                serial8250_set_defaults(uart);
 
                /* Possibly override default I/O functions.  */
index e14982f36a04dff107b11f1f5e75b2b7a587390a..61ad6c3b20a02b82e6aa95b46fc6d467edc86334 100644 (file)
@@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
        serial8250_do_set_mctrl(port, mctrl);
 
-       if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
-                                               UART_GPIO_RTS))) {
-               /*
-                * Turn off autoRTS if RTS is lowered and restore autoRTS
-                * setting if RTS is raised
-                */
-               lcr = serial_in(up, UART_LCR);
-               serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-               if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
-                       priv->efr |= UART_EFR_RTS;
-               else
-                       priv->efr &= ~UART_EFR_RTS;
-               serial_out(up, UART_EFR, priv->efr);
-               serial_out(up, UART_LCR, lcr);
-       }
+       /*
+        * Turn off autoRTS if RTS is lowered and restore autoRTS setting
+        * if RTS is raised
+        */
+       lcr = serial_in(up, UART_LCR);
+       serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+       if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+               priv->efr |= UART_EFR_RTS;
+       else
+               priv->efr &= ~UART_EFR_RTS;
+       serial_out(up, UART_EFR, priv->efr);
+       serial_out(up, UART_LCR, lcr);
 }
 
 /*
@@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port,
        priv->efr = 0;
        up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
-       if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW
-               && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
-                                                       UART_GPIO_RTS))) {
+       if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
                /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
                up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
                priv->efr |= UART_EFR_CTS;
index 7481b95c6d846770b10f77a64e8231c7b2ad4e8e..bdfa659b9606a93360fd6e978a6b9c89d9a3e251 100644 (file)
@@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port)
        if (up->bugs & UART_BUG_NOMSR)
                return;
 
-       mctrl_gpio_disable_ms(up->gpios);
-
        up->ier &= ~UART_IER_MSI;
        serial_port_out(port, UART_IER, up->ier);
 }
@@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port)
        if (up->bugs & UART_BUG_NOMSR)
                return;
 
-       mctrl_gpio_enable_ms(up->gpios);
-
        up->ier |= UART_IER_MSI;
 
        serial8250_rpm_get(up);
@@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port)
                ret |= TIOCM_DSR;
        if (status & UART_MSR_CTS)
                ret |= TIOCM_CTS;
-
-       return mctrl_gpio_get(up->gpios, &ret);
+       return ret;
 }
 EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
 
index c9ec839a5ddf447a6b7b3fe3158ad4104e3024c2..7c6f7afca5ddeed7b25fa6272246fc539bf31b04 100644 (file)
@@ -6,7 +6,6 @@
 config SERIAL_8250
        tristate "8250/16550 and compatible serial support"
        select SERIAL_CORE
-       select SERIAL_MCTRL_GPIO if GPIOLIB
        ---help---
          This selects whether you want to include the driver for the standard
          serial ports.  The standard answer is Y.  People who might say N
index 923266cd294a33c8d98cbe274df0991f6647dafa..48ec7651989b093fc015e44b59657c7000e11012 100644 (file)
@@ -111,7 +111,6 @@ struct uart_8250_port {
                                                 *   if no_console_suspend
                                                 */
        unsigned char           probe;
-       struct mctrl_gpios      *gpios;
 #define UART_PROBE_RSA (1 << 0)
 
        /*