mwifiex: add cfg80211 handler for set_bitrate_mask

Currently, setting only legacy bitrates on 2.4GHz band
are supported. Mode 802.11b/g/bg is enabled based on
bitrates selection. If only CCK bitrates selected then
802.11b mode is enabled. If only OFDM bitrates are
selected then 802.11g mode is enabled. For both: CCK
and OFDM rates 802.11bg mixed mode is enabled.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 4487d935654ed7bcb0d6649ff91dc8cfde81e501..352d2c5da1fcdacde3d08283305fd82e73c22600 100644 (file)
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -671,6 +671,59 @@ static const u32 mwifiex_cipher_suites[] = {
        WLAN_CIPHER_SUITE_CCMP,
 };
 
+/*
+ * CFG802.11 operation handler for setting bit rates.
+ *
+ * Function selects legacy bang B/G/BG from corresponding bitrates selection.
+ * Currently only 2.4GHz band is supported.
+ */
+static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
+                               struct net_device *dev,
+                               const u8 *peer,
+                               const struct cfg80211_bitrate_mask *mask)
+{
+       struct mwifiex_ds_band_cfg band_cfg;
+       struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+       int index = 0, mode = 0, i;
+
+       /* Currently only 2.4GHz is supported */
+       for (i = 0; i < mwifiex_band_2ghz.n_bitrates; i++) {
+               /*
+                * Rates below 6 Mbps in the table are CCK rates; 802.11b
+                * and from 6 they are OFDM; 802.11G
+                */
+               if (mwifiex_rates[i].bitrate == 60) {
+                       index = 1 << i;
+                       break;
+               }
+       }
+
+       if (mask->control[IEEE80211_BAND_2GHZ].legacy < index) {
+               mode = BAND_B;
+       } else {
+               mode = BAND_G;
+               if (mask->control[IEEE80211_BAND_2GHZ].legacy % index)
+                       mode |=  BAND_B;
+       }
+
+       memset(&band_cfg, 0, sizeof(band_cfg));
+       band_cfg.config_bands = mode;
+
+       if (priv->bss_mode == NL80211_IFTYPE_ADHOC)
+               band_cfg.adhoc_start_band = mode;
+
+       band_cfg.sec_chan_offset = NO_SEC_CHANNEL;
+
+       if (mwifiex_set_radio_band_cfg(priv, &band_cfg))
+               return -EFAULT;
+
+       wiphy_debug(wiphy, "info: device configured in 802.11%s%s mode\n",
+                               (mode & BAND_B) ? "b" : "",
+                               (mode & BAND_G) ? "g" : "");
+
+       return 0;
+}
+
 /*
  * CFG802.11 operation handler for disconnection request.
  *
@@ -1225,6 +1278,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
        .set_default_key = mwifiex_cfg80211_set_default_key,
        .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt,
        .set_tx_power = mwifiex_cfg80211_set_tx_power,
+       .set_bitrate_mask = mwifiex_cfg80211_set_bitrate_mask,
 };
 
 /*