* MDIC mode. No harm in trying again in this case since
* the PHY ID is unknown at this point anyway
*/
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
if (ret_val)
goto out;
+ phy->ops.release_phy(hw);
retry_count++;
}
out:
/* Revert to MDIO fast mode, if applicable */
- if (retry_count)
+ if (retry_count) {
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ phy->ops.release_phy(hw);
+ }
return ret_val;
}
}
/**
- * e1000e_read_phy_reg_igp - Read igp PHY register
+ * __e1000e_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphores before exiting.
**/
-s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release_phy(hw);
+ data);
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
+/**
+ * e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores the
+ * retrieved information in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
/**
* e1000e_write_phy_reg_igp - Write igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
/**
- * e1000e_read_kmrn_reg - Read kumeran register
+ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * __e1000_read_kmrn_reg - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then reads the PHY register at offset
* using the kumeran interface. The information retrieved is stored in data.
* Release any acquired semaphores before exiting.
**/
-s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
kmrnctrlsta = er32(KMRNCTRLSTA);
*data = (u16)kmrnctrlsta;
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
/**
- * e1000e_write_kmrn_reg - Write kumeran register
+ * e1000e_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset using the
+ * kumeran interface. The information retrieved is stored in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000_read_kmrn_reg_locked - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the kumeran interface. The
+ * information retrieved is stored in data.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_kmrn_reg - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then write the data to PHY register
* at the offset using the kumeran interface. Release any acquired semaphores
* before exiting.
**/
-s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
+out:
return ret_val;
}
+/**
+ * e1000e_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to the PHY register at the offset
+ * using the kumeran interface. Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000_write_kmrn_reg_locked - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Write the data to PHY register at the offset using the kumeran interface.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
/**
* e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
* @hw: pointer to the HW structure
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
true);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
false);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
* 3) Write the address using the address opcode (0x11)
* 4) Read or write the data using the data opcode (0x12)
* 5) Restore 769_17.2 to its original value
+ *
+ * Assumes semaphore already acquired.
**/
static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
s32 ret_val;
u16 reg = BM_PHY_REG_NUM(offset);
u16 phy_reg = 0;
- u8 phy_acquired = 1;
-
/* Gig must be disabled for MDIO accesses to page 800 */
if ((hw->mac.type == e1000_pchlan) &&
(!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 1 */
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
return 0;
}
+/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ * @slow: true for slow mode, false for normal mode
+ *
+ * Assumes semaphore already acquired.
+ **/
s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
{
s32 ret_val = 0;
u16 data = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
(BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
+
ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
(0x2180 | (slow << 10)));
+ if (ret_val)
+ goto out;
/* dummy read when reverting to fast mode - throw away result */
if (!slow)
- e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
- hw->phy.ops.release_phy(hw);
+ ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+out:
return ret_val;
}
/**
- * e1000_read_phy_reg_hv - Read HV PHY register
+ * __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphore before exiting.
**/
-s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
-
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
/**
- * e1000_write_phy_reg_hv - Write HV PHY register
+ * e1000_read_phy_reg_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores
+ * the retrieved information in data. Release the acquired semaphore
+ * before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_read_phy_reg_hv_locked - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_phy_reg_hv - Write HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
((MAX_PHY_REG_ADDRESS & reg) == 0) &&
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
- hw->phy.ops.release_phy(hw);
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
&data2, false);
if (ret_val)
goto out;
-
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
}
if (reg > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
+/**
+ * e1000_write_phy_reg_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register at the offset.
+ * Release the acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_write_phy_reg_hv_locked - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset. Assumes semaphore
+ * already acquired.
+ **/
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, true);
+}
+
/**
* e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
* @page: page to be accessed
* @data: pointer to the data to be read or written
* @read: determines if operation is read or written
*
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retreived information in data. Release any acquired
- * semaphores before exiting. Note that the procedure to read these regs
- * uses the address port and data port to read/write.
+ * Reads the PHY register at offset and stores the retreived information
+ * in data. Assumes semaphore already acquired. Note that the procedure
+ * to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
s32 ret_val;
u32 addr_reg = 0;
u32 data_reg = 0;
- u8 phy_acquired = 1;
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- hw_dbg(hw, "Could not acquire PHY\n");
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 2 */
hw->phy.addr = 2;
}
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff