ata: sata_via: Use dev_dbg

Use normal debugging path for dynamic debug capability.

Convert dev_printk(KERN_DEBUG to dev_dbg(

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 21007b10c6760f6e34099232a6448e34c15486ca..f93e43b0ccd8fc7162884b987dcf9919c243e432 100644 (file)
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -548,9 +548,8 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
        /* make sure SATA channels are enabled */
        pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
        if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-               dev_printk(KERN_DEBUG, &pdev->dev,
-                          "enabling SATA channels (0x%x)\n",
-                          (int) tmp8);
+               dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n",
+                       (int)tmp8);
                tmp8 |= ALL_PORTS;
                pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
        }
@@ -558,9 +557,8 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
        /* make sure interrupts for each channel sent to us */
        pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
        if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-               dev_printk(KERN_DEBUG, &pdev->dev,
-                          "enabling SATA channel interrupts (0x%x)\n",
-                          (int) tmp8);
+               dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n",
+                       (int) tmp8);
                tmp8 |= ALL_PORTS;
                pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
        }
@@ -568,9 +566,9 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
        /* make sure native mode is enabled */
        pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
        if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-               dev_printk(KERN_DEBUG, &pdev->dev,
-                          "enabling SATA channel native mode (0x%x)\n",
-                          (int) tmp8);
+               dev_dbg(&pdev->dev,
+                       "enabling SATA channel native mode (0x%x)\n",
+                       (int) tmp8);
                tmp8 |= NATIVE_MODE_ALL;
                pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
        }