tg3: Simplify tg3_phy_eee_config_ok() by reusing tg3_eee_pull_config()
authorNithin Sujir <nsujir@broadcom.com>
Sat, 18 May 2013 06:26:54 +0000 (06:26 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 20 May 2013 07:13:47 +0000 (00:13 -0700)
eee_config_ok() was checking only for mismatch in advertised settings.
This patch expands the scope of eee_config_ok() to check for mismatch in
the other eee settings. On mismatch we will require a call to
tg3_setup_eee() to push the configured settings to the hardware.

Reviewed-by: Ben Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/tg3.c

index 3e7bc3837ef92c1649b5ef87ace6d16bbc519d20..2e4974823853b5d19f3daa17e23bd67ce904586f 100644 (file)
@@ -4540,26 +4540,23 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
 
 static bool tg3_phy_eee_config_ok(struct tg3 *tp)
 {
-       u32 val;
-       u32 tgtadv = 0;
-       u32 advertising = tp->link_config.advertising;
+       struct ethtool_eee eee;
 
        if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
                return true;
 
-       if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val))
-               return false;
-
-       val &= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
-
-
-       if (advertising & ADVERTISED_100baseT_Full)
-               tgtadv |= MDIO_AN_EEE_ADV_100TX;
-       if (advertising & ADVERTISED_1000baseT_Full)
-               tgtadv |= MDIO_AN_EEE_ADV_1000T;
+       tg3_eee_pull_config(tp, &eee);
 
-       if (val != tgtadv)
-               return false;
+       if (tp->eee.eee_enabled) {
+               if (tp->eee.advertised != eee.advertised ||
+                   tp->eee.tx_lpi_timer != eee.tx_lpi_timer ||
+                   tp->eee.tx_lpi_enabled != eee.tx_lpi_enabled)
+                       return false;
+       } else {
+               /* EEE is disabled but we're advertising */
+               if (eee.advertised)
+                       return false;
+       }
 
        return true;
 }
@@ -4862,8 +4859,10 @@ static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset)
                         */
                        if (!eee_config_ok &&
                            (tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
-                           !force_reset)
+                           !force_reset) {
+                               tg3_setup_eee(tp);
                                tg3_phy_reset(tp);
+                       }
                } else {
                        if (!(bmcr & BMCR_ANENABLE) &&
                            tp->link_config.speed == current_speed &&