mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5

On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.

The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index d601e41af282105ad5c3a86d30d569dfef3def8c..0be4e2013632f97ce4dddc489212c2ed6f7c4985 100644 (file)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
                imx_data->scratchpad = val;
                return;
        case SDHCI_COMMAND:
-               if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
-                       && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+               if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+                    host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+                   (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
                        val |= SDHCI_CMD_ABORTCMD;
 
                if (is_imx6q_usdhc(imx_data)) {