pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
-
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
dp_clock = dig_connector->dp_clock;
}
}
-/* this might work properly with the new pll algo */
-#if 0 /* doesn't work properly on some laptops */
+
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (ss_enabled) {
if (ss->refdiv) {
pll->flags |= RADEON_PLL_USE_REF_DIV;
pll->reference_div = ss->refdiv;
+ if (ASIC_IS_AVIVO(rdev))
+ pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;
}
}
}
-#endif
+
if (ASIC_IS_AVIVO(rdev)) {
/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
adjusted_clock = mode->clock * 2;
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
- /* rv515 needs more testing with this option */
- if (rdev->family != CHIP_RV515) {
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- pll->flags |= RADEON_PLL_IS_LCD;
- }
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ pll->flags |= RADEON_PLL_IS_LCD;
} else {
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
/* adjust pixel clock as needed */
adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);
- /* rv515 seems happier with the old algo */
- if (rdev->family == CHIP_RV515)
- radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div);
- else if (ASIC_IS_AVIVO(rdev))
+ if (ASIC_IS_AVIVO(rdev))
radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
&ref_div, &post_div);
else