conn->c_xmit_sg = 0;
conn->c_xmit_hdr_off = 0;
conn->c_xmit_data_off = 0;
- conn->c_xmit_rdma_sent = 0;
conn->c_xmit_atomic_sent = 0;
+ conn->c_xmit_rdma_sent = 0;
+ conn->c_xmit_data_sent = 0;
conn->c_map_queued = 0;
/*
* spin trying to push headers and data down the connection until
- * the connection doens't make forward progress.
+ * the connection doesn't make forward progress.
*/
while (--send_quota) {
- /*
- * See if need to send a congestion map update if we're
- * between sending messages. The send_sem protects our sole
- * use of c_map_offset and _bytes.
- * Note this is used only by transports that define a special
- * xmit_cong_map function. For all others, we create allocate
- * a cong_map message and treat it just like any other send.
- */
- if (conn->c_map_bytes) {
- ret = conn->c_trans->xmit_cong_map(conn, conn->c_lcong,
- conn->c_map_offset);
- if (ret <= 0)
- break;
- conn->c_map_offset += ret;
- conn->c_map_bytes -= ret;
- if (conn->c_map_bytes)
- continue;
- }
-
- /* If we're done sending the current message, clear the
- * offset and S/G temporaries.
- */
rm = conn->c_xmit_rm;
- if (rm &&
- conn->c_xmit_hdr_off == sizeof(struct rds_header) &&
- conn->c_xmit_sg == rm->data.op_nents) {
- conn->c_xmit_rm = NULL;
- conn->c_xmit_sg = 0;
- conn->c_xmit_hdr_off = 0;
- conn->c_xmit_data_off = 0;
- conn->c_xmit_rdma_sent = 0;
- conn->c_xmit_atomic_sent = 0;
-
- /* Release the reference to the previous message. */
- rds_message_put(rm);
- rm = NULL;
- }
- /* If we're asked to send a cong map update, do so.
+ /*
+ * If between sending messages, we can send a pending congestion
+ * map update.
+ *
+ * Transports either define a special xmit_cong_map function,
+ * or we allocate a cong_map message and treat it just like any
+ * other send.
*/
if (!rm && test_and_clear_bit(0, &conn->c_map_queued)) {
if (conn->c_trans->xmit_cong_map) {
- conn->c_map_offset = 0;
- conn->c_map_bytes = sizeof(struct rds_header) +
+ unsigned long map_offset = 0;
+ unsigned long map_bytes = sizeof(struct rds_header) +
RDS_CONG_MAP_BYTES;
- continue;
- }
- rm = rds_cong_update_alloc(conn);
- if (IS_ERR(rm)) {
- ret = PTR_ERR(rm);
- break;
- }
+ while (map_bytes) {
+ ret = conn->c_trans->xmit_cong_map(conn, conn->c_lcong,
+ map_offset);
+ if (ret <= 0) {
+ /* too far down the rabbithole! */
+ mutex_unlock(&conn->c_send_lock);
+ rds_conn_error(conn, "Cong map xmit failed\n");
+ goto out;
+ }
+
+ map_offset += ret;
+ map_bytes -= ret;
+ }
+ } else {
+ /* send cong update like a normal rm */
+ rm = rds_cong_update_alloc(conn);
+ if (IS_ERR(rm)) {
+ ret = PTR_ERR(rm);
+ break;
+ }
+ rm->data.op_active = 1;
- conn->c_xmit_rm = rm;
+ conn->c_xmit_rm = rm;
+ }
}
/*
- * Grab the next message from the send queue, if there is one.
+ * If not already working on one, grab the next message.
*
* c_xmit_rm holds a ref while we're sending this message down
* the connction. We can use this ref while holding the
conn->c_xmit_rm = rm;
}
-
if (rm->atomic.op_active && !conn->c_xmit_atomic_sent) {
ret = conn->c_trans->xmit_atomic(conn, rm);
if (ret)
/* The transport owns the mapped memory for now.
* You can't unmap it while it's on the send queue */
set_bit(RDS_MSG_MAPPED, &rm->m_flags);
+
+ /*
+ * This is evil, muahaha.
+ * We permit 0-byte sends. (rds-ping depends on this.)
+ * BUT if there is an atomic op and no sent data,
+ * we turn off sending the header, to achieve
+ * "silent" atomics.
+ * But see below; RDMA op might toggle this back on!
+ */
+ if (rm->data.op_nents == 0)
+ rm->data.op_active = 0;
}
- /*
- * Try and send an rdma message. Let's see if we can
- * keep this simple and require that the transport either
- * send the whole rdma or none of it.
- */
+ /* The transport either sends the whole rdma or none of it */
if (rm->rdma.op_active && !conn->c_xmit_rdma_sent) {
ret = conn->c_trans->xmit_rdma(conn, &rm->rdma);
if (ret)
set_bit(RDS_MSG_MAPPED, &rm->m_flags);
}
- if (rm->data.op_active
- && (conn->c_xmit_hdr_off < sizeof(struct rds_header) ||
- conn->c_xmit_sg < rm->data.op_nents)) {
+ if (rm->data.op_active && !conn->c_xmit_data_sent) {
ret = conn->c_trans->xmit(conn, rm,
conn->c_xmit_hdr_off,
conn->c_xmit_sg,
conn->c_xmit_sg == rm->data.op_nents);
}
}
+
+ if (conn->c_xmit_hdr_off == sizeof(struct rds_header) &&
+ (conn->c_xmit_sg == rm->data.op_nents))
+ conn->c_xmit_data_sent = 1;
+ }
+
+ /*
+ * A rm will only take multiple times through this loop
+ * if there is a data op. Thus, if the data is sent (or there was
+ * none), then we're done with the rm.
+ */
+ if (!rm->data.op_active || conn->c_xmit_data_sent) {
+ conn->c_xmit_rm = NULL;
+ conn->c_xmit_sg = 0;
+ conn->c_xmit_hdr_off = 0;
+ conn->c_xmit_data_off = 0;
+ conn->c_xmit_rdma_sent = 0;
+ conn->c_xmit_atomic_sent = 0;
+ conn->c_xmit_data_sent = 0;
+
+ rds_message_put(rm);
}
}
*/
mutex_unlock(&conn->c_send_lock);
- if (conn->c_map_bytes || (send_quota == 0 && !was_empty)) {
+ if (send_quota == 0 && !was_empty) {
/* We exhausted the send quota, but there's work left to
* do. Return and (re-)schedule the send worker.
*/