void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
{
if (chan == 0) {
- /* Specify that the relevent pins on the chip should do
+ /* Specify that the relevant pins on the chip should do
serial I/O, not direct I/O. */
ME2_PORT1_PMC |= 0xC;
/* Specify that we're using the UART, not the CSI device. */
ME2_PORT1_PFC |= 0xC;
} else if (chan == 1) {
- /* Specify that the relevent pins on the chip should do
+ /* Specify that the relevant pins on the chip should do
serial I/O, not direct I/O. */
ME2_PORT2_PMC |= 0x6;
/* Specify that we're using the UART, not the CSI device. */
default uses. */
/* Significant address bits used for decoding PCI GCS5 space
- accessess. */
+ accesses. */
MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
/* I don't understand this, but the SolutionGear example code
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must be
the same as what as passed into pci_alloc_consistent. References to
- the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
+ the memory and mappings associated with CPU_ADDR or DMA_ADDR past
this call are illegal. */
void
pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,