return SCI_SUCCESS;
}
-/**
- * This method will give the phy permission to consume power
- * @sci_phy:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_consume_power_handler(
- struct scic_sds_phy *sci_phy)
+enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy)
{
- return sci_phy->state_handlers->consume_power_handler(sci_phy);
+ enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id;
+
+ switch (state) {
+ case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: {
+ u32 enable_spinup;
+
+ enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
+ enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
+ writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
+
+ /* Change state to the final state this substate machine has run to completion */
+ sci_base_state_machine_change_state(&sci_phy->state_machine,
+ SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
+
+ return SCI_SUCCESS;
+ }
+ case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: {
+ u32 scu_sas_pcfg_value;
+
+ /* Release the spinup hold state and reset the OOB state machine */
+ scu_sas_pcfg_value =
+ readl(&sci_phy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value &=
+ ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ writel(scu_sas_pcfg_value,
+ &sci_phy->link_layer_registers->phy_configuration);
+
+ /* Now restart the OOB operation */
+ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ writel(scu_sas_pcfg_value,
+ &sci_phy->link_layer_registers->phy_configuration);
+
+ /* Change state to the final state this substate machine has run to completion */
+ sci_base_state_machine_change_state(&sci_phy->state_machine,
+ SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
+
+ return SCI_SUCCESS;
+ }
+ default:
+ dev_dbg(sciphy_to_dev(sci_phy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
}
/*
next_state);
}
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The notify enable spinups are turned on for this phy object
- * - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler(
- struct scic_sds_phy *sci_phy)
-{
- u32 enable_spinup;
-
- enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
- enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
- writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
-
- /* Change state to the final state this substate machine has run to completion */
- sci_base_state_machine_change_state(&sci_phy->state_machine,
- SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
- return SCI_SUCCESS;
-}
-
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler(
- struct scic_sds_phy *sci_phy)
-{
- u32 scu_sas_pcfg_value;
-
- /* Release the spinup hold state and reset the OOB state machine */
- scu_sas_pcfg_value =
- readl(&sci_phy->link_layer_registers->phy_configuration);
- scu_sas_pcfg_value &=
- ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
- scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
- writel(scu_sas_pcfg_value,
- &sci_phy->link_layer_registers->phy_configuration);
-
- /* Now restart the OOB operation */
- scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
- scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
- writel(scu_sas_pcfg_value,
- &sci_phy->link_layer_registers->phy_configuration);
-
- /* Change state to the final state this substate machine has run to completion */
- sci_base_state_machine_change_state(&sci_phy->state_machine,
- SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
- return SCI_SUCCESS;
-}
-
-static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy,
- const char *func)
-{
- dev_dbg(sciphy_to_dev(sci_phy),
- "%s: in wrong state: %d\n", func,
- sci_base_state_machine_get_state(&sci_phy->state_machine));
- return SCI_FAILURE_INVALID_STATE;
-}
-
-static enum sci_status
-scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy)
-{
- return default_phy_handler(sci_phy, __func__);
-}
-
-
enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy,
u32 event_code)
{
}
-
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = {
- [SCI_BASE_PHY_STATE_INITIAL] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCI_BASE_PHY_STATE_STOPPED] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCI_BASE_PHY_STATE_STARTING] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
- .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
- .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCI_BASE_PHY_STATE_READY] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCI_BASE_PHY_STATE_RESETTING] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- },
- [SCI_BASE_PHY_STATE_FINAL] = {
- .consume_power_handler = scic_sds_phy_default_consume_power_handler
- }
-};
-
-/*
- * ****************************************************************************
- * * PHY STARTING SUBSTATE METHODS
- * **************************************************************************** */
-
-/**
- * scic_sds_phy_starting_initial_substate_enter -
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state
- * handlers are put in place for the struct scic_sds_phy object. - The state is
- * changed to the wait phy type event notification. none
- */
static void scic_sds_phy_starting_initial_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
-
/* This is just an temporary state go off to the starting state */
sci_base_state_machine_change_state(&sci_phy->state_machine,
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object)
-{
- struct scic_sds_phy *sci_phy = object;
-
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN
- );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_sas_speed_en_substate_enter(
- void *object)
-{
- struct scic_sds_phy *sci_phy = object;
-
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
- );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object)
-{
- struct scic_sds_phy *sci_phy = object;
-
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF
- );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
+ struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER
- );
-
- scic_sds_controller_power_control_queue_insert(
- scic_sds_phy_get_controller(sci_phy),
- sci_phy
- );
+ scic_sds_controller_power_control_queue_insert(scic, sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object)
{
struct scic_sds_phy *sci_phy = object;
+ struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
- scic_sds_controller_power_control_queue_remove(
- scic_sds_phy_get_controller(sci_phy), sci_phy
- );
+ scic_sds_controller_power_control_queue_remove(scic, sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
+ struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
- scic_sds_phy_set_base_state_handlers(
- sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
- );
-
- scic_sds_controller_power_control_queue_insert(
- scic_sds_phy_get_controller(sci_phy),
- sci_phy
- );
+ scic_sds_controller_power_control_queue_insert(scic, sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object)
{
struct scic_sds_phy *sci_phy = object;
+ struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
- scic_sds_controller_power_control_queue_remove(
- scic_sds_phy_get_controller(sci_phy),
- sci_phy
- );
+ scic_sds_controller_power_control_queue_remove(scic, sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(
- sci_phy,
- SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
isci_timer_start(sci_phy->sata_timeout_timer,
SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy
- * on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_phy_substate_exit(
- void *object)
+static void scic_sds_phy_starting_await_sata_phy_substate_exit(void *object)
{
struct scic_sds_phy *sci_phy = object;
isci_timer_stop(sci_phy->sata_timeout_timer);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(
- sci_phy,
- SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
-
isci_timer_start(sci_phy->sata_timeout_timer,
SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
+static void scic_sds_phy_starting_await_sata_speed_substate_exit(
void *object)
{
struct scic_sds_phy *sci_phy = object;
isci_timer_stop(sci_phy->sata_timeout_timer);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the
- * struct scic_sds_phy object state handlers for this state.
- * - Start the SIGNATURE FIS
- * timeout timer none
- */
static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
{
- bool continue_to_ready_state;
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(
- sci_phy,
- SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-
- continue_to_ready_state = scic_sds_port_link_detected(
- sci_phy->owning_port,
- sci_phy);
+ if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) {
- if (continue_to_ready_state) {
/*
* Clear the PE suspend condition so we can actually
* receive SIG FIS
sci_phy->is_in_link_training = false;
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE
- * FIS timeout timer. none
- */
-static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(
- void *object)
+static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(void *object)
{
struct scic_sds_phy *sci_phy = object;
isci_timer_stop(sci_phy->sata_timeout_timer);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy
- * object state handlers for this state. - Change base state machine to the
- * ready state. none
- */
static void scic_sds_phy_starting_final_substate_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(sci_phy,
- SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
/* State machine has run to completion so exit out and change
* the base state machine to the ready state
*/
SCI_BASE_PHY_STATE_READY);
}
-/*
- * ****************************************************************************
- * * PHY STATE PRIVATE METHODS
- * **************************************************************************** */
-
/**
*
* @sci_phy: This is the struct scic_sds_phy object to stop.
&sci_phy->link_layer_registers->phy_configuration);
}
-/*
- * ****************************************************************************
- * * PHY BASE STATE METHODS
- * **************************************************************************** */
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. none
- */
-static void scic_sds_phy_initial_state_enter(void *object)
-{
- struct scic_sds_phy *sci_phy = object;
-
- scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. - The SCU
- * hardware is requested to stop the protocol engine. none
- */
static void scic_sds_phy_stopped_state_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
+ struct scic_sds_port *sci_port = sci_phy->owning_port;
+ struct scic_sds_controller *scic = sci_port->owning_controller;
struct isci_host *ihost = scic_to_ihost(scic);
/*
* @todo We need to get to the controller to place this PE in a
* reset state
*/
-
- scic_sds_phy_set_base_state_handlers(sci_phy,
- SCI_BASE_PHY_STATE_STOPPED);
-
if (sci_phy->sata_timeout_timer != NULL) {
isci_del_timer(ihost, sci_phy->sata_timeout_timer);
scu_link_layer_stop_protocol_engine(sci_phy);
- if (sci_phy->state_machine.previous_state_id !=
- SCI_BASE_PHY_STATE_INITIAL)
- scic_sds_controller_link_down(
- scic_sds_phy_get_controller(sci_phy),
- scic_sds_phy_get_port(sci_phy),
- sci_phy);
+ if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL)
+ scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy),
+ scic_sds_phy_get_port(sci_phy),
+ sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state
- * handlers for the phy object base state machine starting state. - The SCU
- * hardware is requested to start OOB/SN on this protocl engine. - The phy
- * starting substate machine is started. - If the previous state was the ready
- * state then the struct scic_sds_controller is informed that the phy has gone link
- * down. none
- */
static void scic_sds_phy_starting_state_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING);
-
scu_link_layer_stop_protocol_engine(sci_phy);
scu_link_layer_start_oob(sci_phy);
sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
sci_phy->bcn_received_while_port_unassigned = false;
- if (sci_phy->state_machine.previous_state_id
- == SCI_BASE_PHY_STATE_READY) {
- scic_sds_controller_link_down(
- scic_sds_phy_get_controller(sci_phy),
- scic_sds_phy_get_port(sci_phy),
- sci_phy
- );
- }
+ if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY)
+ scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy),
+ scic_sds_phy_get_port(sci_phy),
+ sci_phy);
sci_base_state_machine_change_state(&sci_phy->state_machine,
SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state
- * handlers for the phy object base state machine ready state. - The SCU
- * hardware protocol engine is resumed. - The struct scic_sds_controller is informed
- * that the phy object has gone link up. none
- */
static void scic_sds_phy_ready_state_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY);
+ scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy),
+ scic_sds_phy_get_port(sci_phy),
+ sci_phy);
- scic_sds_controller_link_up(
- scic_sds_phy_get_controller(sci_phy),
- scic_sds_phy_get_port(sci_phy),
- sci_phy
- );
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware
- * protocol engine represented by this struct scic_sds_phy object. none
- */
static void scic_sds_phy_ready_state_exit(void *object)
{
struct scic_sds_phy *sci_phy = object;
scic_sds_phy_suspend(sci_phy);
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state
- * handlers for the phy object base state machine resetting state. none
- */
static void scic_sds_phy_resetting_state_enter(void *object)
{
struct scic_sds_phy *sci_phy = object;
- scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING);
-
- /*
- * The phy is being reset, therefore deactivate it from the port.
- * In the resetting state we don't notify the user regarding
- * link up and link down notifications. */
+ /* The phy is being reset, therefore deactivate it from the port. In
+ * the resetting state we don't notify the user regarding link up and
+ * link down notifications
+ */
scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false);
if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
scu_link_layer_tx_hard_reset(sci_phy);
} else {
- /*
- * The SCU does not need to have a discrete reset state so
+ /* The SCU does not need to have a discrete reset state so
* just go back to the starting state.
*/
- sci_base_state_machine_change_state(
- &sci_phy->state_machine,
- SCI_BASE_PHY_STATE_STARTING);
+ sci_base_state_machine_change_state(&sci_phy->state_machine,
+ SCI_BASE_PHY_STATE_STARTING);
}
}
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state
- * handlers for the phy object base state machine final state. none
- */
-static void scic_sds_phy_final_state_enter(void *object)
-{
- struct scic_sds_phy *sci_phy = object;
-
- scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL);
-
- /* Nothing to do here */
-}
-
-/* --------------------------------------------------------------------------- */
-
static const struct sci_base_state scic_sds_phy_state_table[] = {
- [SCI_BASE_PHY_STATE_INITIAL] = {
- .enter_state = scic_sds_phy_initial_state_enter,
- },
+ [SCI_BASE_PHY_STATE_INITIAL] = { },
[SCI_BASE_PHY_STATE_STOPPED] = {
.enter_state = scic_sds_phy_stopped_state_enter,
},
[SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
.enter_state = scic_sds_phy_starting_initial_substate_enter,
},
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
- .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter,
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
- .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter,
- },
- [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
- .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter,
- },
+ [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { },
+ [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { },
+ [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { },
[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
.enter_state = scic_sds_phy_starting_await_sas_power_substate_enter,
.exit_state = scic_sds_phy_starting_await_sas_power_substate_exit,
[SCI_BASE_PHY_STATE_RESETTING] = {
.enter_state = scic_sds_phy_resetting_state_enter,
},
- [SCI_BASE_PHY_STATE_FINAL] = {
- .enter_state = scic_sds_phy_final_state_enter,
- },
+ [SCI_BASE_PHY_STATE_FINAL] = { },
};
void scic_sds_phy_construct(struct scic_sds_phy *sci_phy,
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff