The LLBIT (bit 4) in the Config5 CP0 register indicates the software
availability of the Load-Linked bit. This bit is only set by hardware
and it has the following meaning:
0: LLB functionality is not supported
1: LLB functionality is supported. The following feature are also
supported:
- ERETNC instruction. Similar to ERET but it does not clear the LLB
bit in the LLAddr register.
- CP0 LLAddr/LLB bit must be set
- LLbit is software accessible through the LLAddr[0]
This will be used later on to emulate R2 LL/SC instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
#ifndef cpu_has_maar
#define cpu_has_maar (cpu_data[0].options & MIPS_CPU_MAAR)
#endif
+#ifndef cpu_has_rw_llb
+#define cpu_has_rw_llb (cpu_data[0].options & MIPS_CPU_RW_LLB)
+#endif
/*
* For the moment we don't consider R6000 and R8000 so we can assume that
#define MIPS_CPU_RIXIEX 0x200000000ull /* CPU has unique exception codes for {Read, Execute}-Inhibit exceptions */
#define MIPS_CPU_MAAR 0x400000000ull /* MAAR(I) registers are present */
#define MIPS_CPU_FRE 0x800000000ull /* FRE & UFE bits implemented */
+#define MIPS_CPU_RW_LLB 0x1000000000ull /* LLADDR/LLB writes are allowed */
/*
* CPU ASE encodings
#define MIPS_CONF5_NF (_ULCAST_(1) << 0)
#define MIPS_CONF5_UFR (_ULCAST_(1) << 2)
#define MIPS_CONF5_MRP (_ULCAST_(1) << 3)
+#define MIPS_CONF5_LLB (_ULCAST_(1) << 4)
#define MIPS_CONF5_MVH (_ULCAST_(1) << 5)
#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
c->options |= MIPS_CPU_EVA;
if (config5 & MIPS_CONF5_MRP)
c->options |= MIPS_CPU_MAAR;
+ if (config5 & MIPS_CONF5_LLB)
+ c->options |= MIPS_CPU_RW_LLB;
return config5 & MIPS_CONF_M;
}