clk: max77686: Add support for MAX77620 clocks

Maxim Max77620 has one 32KHz clock output and the clock HW
IP used on this PMIC is same as what it is there in the MAX77686.

Add clock driver support for MAX77620 on the MAX77686 driver.

CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index d7d2993a889ca3e617b881913f128e7dda216584..b3ee99adee4baa03dcf00e8ab3863a5a5b8d983d 100644 (file)
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -32,10 +32,11 @@ config COMMON_CLK_WM831X
 source "drivers/clk/versatile/Kconfig"
 
 config COMMON_CLK_MAX77686
-       tristate "Clock driver for Maxim 77686/77802 MFD"
-       depends on MFD_MAX77686
+       tristate "Clock driver for Maxim 77620/77686/77802 MFD"
+       depends on MFD_MAX77686 || MFD_MAX77620
        ---help---
-         This driver supports Maxim 77686/77802 crystal oscillator clock.
+         This driver supports Maxim 77620/77686/77802 crystal oscillator
+         clock.
 
 config COMMON_CLK_RK808
        tristate "Clock driver for RK808/RK818"

diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index 9aba3a8245e15f5c84f4e20b4afb0aece9c3a4f0..19f620856571cd37b952e067551a5c476c7ddbb7 100644 (file)
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/max77620.h>
 #include <linux/mfd/max77686.h>
 #include <linux/mfd/max77686-private.h>
 #include <linux/clk-provider.h>
@@ -35,12 +36,14 @@
 
 #include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/clock/maxim,max77620.h>
 
 #define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3
 
 enum max77686_chip_name {
        CHIP_MAX77686,
        CHIP_MAX77802,
+       CHIP_MAX77620,
 };
 
 struct max77686_hw_clk_info {
@@ -97,6 +100,15 @@ max77686_hw_clk_info max77802_hw_clks_info[MAX77802_CLKS_NUM] = {
        },
 };
 
+static const struct
+max77686_hw_clk_info max77620_hw_clks_info[MAX77620_CLKS_NUM] = {
+       [MAX77620_CLK_32K_OUT0] = {
+               .name = "32khz_out0",
+               .clk_reg = MAX77620_REG_CNFG1_32K,
+               .clk_enable_mask = MAX77620_CNFG1_32K_OUT0_EN,
+       },
+};
+
 static struct max77686_clk_init_data *to_max77686_clk_init_data(
                                struct clk_hw *hw)
 {
@@ -181,6 +193,11 @@ static int max77686_clk_probe(struct platform_device *pdev)
                hw_clks = max77802_hw_clks_info;
                break;
 
+       case CHIP_MAX77620:
+               num_clks = MAX77620_CLKS_NUM;
+               hw_clks = max77620_hw_clks_info;
+               break;
+
        default:
                dev_err(dev, "Unknown Chip ID\n");
                return -EINVAL;
@@ -284,6 +301,7 @@ static int max77686_clk_remove(struct platform_device *pdev)
 static const struct platform_device_id max77686_clk_id[] = {
        { "max77686-clk", .driver_data = CHIP_MAX77686, },
        { "max77802-clk", .driver_data = CHIP_MAX77802, },
+       { "max77620-clock", .driver_data = CHIP_MAX77620, },
        {},
 };
 MODULE_DEVICE_TABLE(platform, max77686_clk_id);