mtd: IFC NAND: Add support of ONFI NAND flash

  - Fix NAND_CMD_READID command for ONFI detect.
  - Add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index c30ac7b83d284cf2da970ab755441b7ba40de0dd..5387cec53c9aa669f717e062415e418990dfdf72 100644 (file)
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -375,21 +375,31 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
                return;
 
-       /* READID must read all 8 possible bytes */
        case NAND_CMD_READID:
+       case NAND_CMD_PARAM: {
+               int timing = IFC_FIR_OP_RB;
+               if (command == NAND_CMD_PARAM)
+                       timing = IFC_FIR_OP_RBCD;
+
                out_be32(&ifc->ifc_nand.nand_fir0,
                                (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
                                (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-                               (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+                               (timing << IFC_NAND_FIR0_OP2_SHIFT));
                out_be32(&ifc->ifc_nand.nand_fcr0,
-                               NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
-               /* 8 bytes for manuf, device and exts */
-               out_be32(&ifc->ifc_nand.nand_fbcr, 8);
-               ifc_nand_ctrl->read_bytes = 8;
+                               command << IFC_NAND_FCR0_CMD0_SHIFT);
+               out_be32(&ifc->ifc_nand.row3, column);
+
+               /*
+                * although currently it's 8 bytes for READID, we always read
+                * the maximum 256 bytes(for PARAM)
+                */
+               out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+               ifc_nand_ctrl->read_bytes = 256;
 
                set_addr(mtd, 0, 0, 0);
                fsl_ifc_run_command(mtd);
                return;
+       }
 
        /* ERASE1 stores the block and page address */
        case NAND_CMD_ERASE1: